Date: Fri, 2 Nov 2018 09:45:35 +0100 From: Hans Petter Selasky <hps@selasky.org> To: Mike Andrews <mandrews@bit0.com>, "Andrey V. Elsukov" <bu7cher@yandex.ru> Cc: freebsd-usb@freebsd.org Subject: Re: umodem0, Cisco USB serial console, and quirks Message-ID: <15cff2a5-021f-49e5-b287-37a14a9321b3@selasky.org> In-Reply-To: <18d57cbe-1235-aedf-45e6-e36b495ca1eb@bit0.com> References: <alpine.BSF.2.21.1709191021260.34953@beast.int.bit0.com> <d9dbef0b-c22e-c7ea-34a2-f36e9e768745@selasky.org> <alpine.BSF.2.21.1709191205280.1218@beast.int.bit0.com> <0c4022f3-bd21-49b5-cadd-daeb9f1f3081@selasky.org> <alpine.BSF.2.21.1709262210180.33243@beast.int.bit0.com> <33f3a1f8-69d1-9240-6381-8a851beb97d0@yandex.ru> <18d57cbe-1235-aedf-45e6-e36b495ca1eb@bit0.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 11/2/18 1:01 AM, Mike Andrews wrote: > On 11/1/18 4:59 PM, Andrey V. Elsukov wrote: > >> On 27.09.2017 05:11, Mike Andrews wrote: >>>> This is the USB read transfer. The other side is not returning any >>>> data, so neither is "cu" printing anything. Maybe you can try to get a >>>> similar trace from the system where it works? >>>> >>>> Looks to me like some kind of protocol error, that the Cisco USB >>>> serial console needs some kind of activation. >>> Took me a few days to get around to getting usbmon going on Linux. The >>> verbose dump is too large for the list, so: >>> >>> https://www.bit0.com/tmp/usbmon-ciscoasa-verbose.txt >>> https://www.bit0.com/tmp/usbmon-ciscoasa.txt >> Hi, >> >> did you find some solution? It seems this device still doesn't work with >> recent FreeBSD. >> I found how it should work on linux: >> https://community.cisco.com/t5/network-architecture-documents/cisco-console-connection-via-usb-serial/ta-p/3163540 >> >> >> And it seems in Linux it is handled by generic CDC ACM driver without >> any quirks. So, I think the problem is with our umodem(4) or ucom(4) >> driver. >> > No, I didn't. > > The usbmon dumps above are still there, and if someone can suggest > anything else I can do to help, lemme know. > Hi, Are there any errors printed in dmesg for this device? What does "usbconfig -d X.Y dump_device_desc dump_curr_config_desc" where X.Y are numbers after ugenX.Y, output? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15cff2a5-021f-49e5-b287-37a14a9321b3>