Date: Mon, 3 Mar 1997 10:54:46 -0500 (EST) From: Tod Luginbuhl <tod@science-guy.npt.nuwc.navy.mil> To: freebsd-questions@freebsd.org Subject: Strange Console Messages Message-ID: <199703031554.KAA12625@science-guy.npt.nuwc.navy.mil>
next in thread | raw e-mail | index | archive | help
Hello, I am running 2.1.7, and I keep getting the following error message on my console. It happens roughly once a week or so. I copied this one from the console... Feb 28 14:35:32 0.0.0.0 NetBlazer:#Processor FAULT: BPT (vector 3 0x3) (Panic: free_mbuf failed magic number check#)#Version: 3.1, Fri March 22 09:37:38 PST 1996#eip=0008:0003c982 eflags=00000046 <PF,ZF>#eax 00000001 ebx 00053fc0 ecx 00000000 edx 00000001#esp 006b56d0 ebp 006b56e8 esi 001c7158 edi 00000000#ds 0010 es 0010 fs 0010 gs 0010 ss 0018#Stack trace: #0005405c 008385d7 0003elbe 0006e86b 00067cea 00064cc9 00064ecb 00064f4b#00058c7c#Doing core dump, start=0, len=7e0000, ebp=6b56e8# Aside from the time of the incident, this message does not vary at all except for the numbers following esp, ebp and esi. Most of the time, this message does not seem to impact my system in anyway. However, sometimes the message arrives at the same time my ethernet card freezes. Then my system won't respond to pings, telnets, rlogins etc., but aside from network activity, the system is fine. I also received this console message Friday night, and I don't understand it either. Feb 28 21:08:16 0.0.0.0 NetBlazer:#Processor FAULT: Page Fault (vector 14 0xe) (cr2 5e5e5e5e) (error code 0000)#Version: 3.1, Fri March 22 09:37:38 PST 1996#eip=0008:000e1547 eflags=00010206 <PF,IF,RF>#eax 5e5e5e5e ebx 00048d1b ecx 5e5e5e5e edx 00000000#esp 007b6cd8 ebp 007b6cd8 esi 007602d0 edi 00000005#ds 0010 es 0010 fs 0010 gs 0010 ss 0018#Stack trace: #000e2017 003c051 0003bab7 00048d9c 0004922a 000d66c6 0006208 00034495#0007cb7c 0007cc10#Doing core dump, start=0, len=7e0000, ebp=7b6cd8# de0: transmission timeout de0: enabling 10baseT port I'm not sure what is causing the problems or how to track them down. Does anyone have some advice or constructive criticism? I've included a description of my hardware, my kernel configuration file and the boot up message from dmesg at the end of this message. Thanks for the help. Tod -------------------------------------------------------------------------- Tod Luginbuhl email: t.e.luginbuhl@ieee.org Code 2121 Naval Undersea Warfare Center Telephone: (401) 841-7505 x38241 1176 Howell Street FAX: (401) 841-7453 Newport, Rhode Island USA "Don't argue with drunks and fanatics!" -- Sun Wolf (Barbara Hambly) -------------------------------------------------------------------------- hardware description... I have a Gateway 2000 G6-200 (Pentium Pro 200mhz) with 32mb of EDO RAM, a Matrox MGA Millennium 2mb PCI video card, a SMC EtherPower PCI ethernet card, an Adaptec 2940 ultra wide PCI SCSI card (only have SCSI II devices though), a Sound Blaster 16 card (ISA), a Seagate ST32140A 2gb EIDE drive and a Wearnes CDD-620 ATAPI CDROM drive. --------------------------------------------------------------------- # # configuration file for my computer # machine "i386" cpu "I586_CPU" ident SCIENCEGUY maxusers 10 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "COMPAT_LINUX" #linux compatibility options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USER_LDT #allow user-level control of i386 ldt options SYSVSHM options SYSVSEM options SYSVMSG config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr options ATAPI #Enable ATAPI support for IDE bus device wcd0 #IDE CD-ROM controller ahc0 controller scbus0 device sd0 device st0 device st1 device st2 device cd0 #Only need one of these, the code dynamically grows device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device apm0 at isa? # Advanced Power Management device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device de0 controller snd0 device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 conflicts device pca0 at isa? port IO_TIMER1 tty device joy0 at isa? port "IO_GAME" pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's --------------------------------------------------------------- output from dmesg.... FreeBSD 2.1.7-RELEASE #0: Tue Feb 25 15:24:49 EST 1997 root@science-guy.npt.nuwc.navy.mil:/usr/src/sys/compile/SCIENCEGUY CPU: 199-MHz unknown (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x616 Stepping=6 Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,<b11>,MTRR,PGE,MCA,CMOV> real memory = 33554432 (32768K bytes) avail memory = 31211520 (30480K bytes) Probing for devices on PCI bus 0: chip0 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:2:0 chip1 <Intel 82371FB IDE interface> rev 2 on pci0:2:1 de0 <Digital DC21041 Ethernet> rev 17 int a irq 11 on pci0:6 de0: DC21041 [10Mb/s] pass 1.1 de0: address 00:00:c0:7f:e4:cf vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci0:12 ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 9 on pci0:14 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "SEAGATE ST32430N 0640" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2049MB (4197405 512 byte sectors) (ahc0:1:0): "MICROP 1588-15MB1057404 HSP4" type 0 fixed SCSI 1 sd1(ahc0:1:0): Direct-Access 636MB (1304052 512 byte sectors) ahc0:A:4: refuses syncronous negotiation. Using asyncronous transfers (ahc0:4:0): "ARCHIVE VIPER 150 21531 -004" type 1 removable SCSI 1 st0(ahc0:4:0): Sequential-Access st0: Archive Viper 150 is a known rogue drive offline (ahc0:5:0): "EXABYTE EXB-8500-85Qanx0 03U1" type 1 removable SCSI 2 st1(ahc0:5:0): Sequential-Access density code 0x0, drive empty ahc0:A:6: refuses syncronous negotiation. Using asyncronous transfers (ahc0:6:0): "IOMEGA ZIP 100 D.06" type 0 removable SCSI 2 sd2(ahc0:6:0): Direct-Access sd2(ahc0:6:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB sd2 could not mode sense (4). Using ficticious geometry sd2(ahc0:6:0): NOT READY asc:3a,0 Medium not present sd2: could not get size 0MB (0 512 byte sectors) chip2 <Intel 82450KX (Orion) PCI memory controller> rev 2 on pci0:25 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x63 irq 12 on motherboard pca0 on motherboard pca0: PC speaker audio driver fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <ST32140A> wd0: 2015MB (4127760 sectors), 4095 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <WEARNES CDD-620/B1.1>, removable, iordy wcd0: 688/1033Kb/sec, 256Kb cache, audio play, 256 volume levels, ejectable tray wcd0: no disc inside, unlocked, lock protected npx0 on motherboard npx0: INT 16 interface apm0 not found sb0 at 0x220 irq 5 drq 1 on isa sb0: <SoundBlaster 16 4.13> sbxvi0 at 0x0 drq 5 on isa sbxvo0: <SoundBlaster 16 4.13> sbmidi0 at 0x330 on isa <SoundBlaster MPU-401> opl0 at 0x388 on isa opl0: <Yamaha OPL-3 FM> joy0 at 0x201 on isa joy0: joystick de0: enabling 10baseT port st1(ahc0:5:0): NOT READY asc:3a,0 Medium not present de0: transmission timeout de0: enabling 10baseT port
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703031554.KAA12625>