Date: Thu, 29 Jan 2009 06:14:37 -0800 (PST) From: Kirill Yelizarov <ykirill@yahoo.com> To: Robert Noland <rnoland@FreeBSD.org> Cc: freebsd-x11@freebsd.org Subject: Re: Problems with hardware rendering on i865 Message-ID: <774620.19524.qm@web58706.mail.re1.yahoo.com> In-Reply-To: <1233235077.1779.24.camel@wombat.2hip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Robert, I'm running: FreeBSD mysrv.faberlic.com 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009 root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV i386 all ports are up to date Jan 29 2009 what other information may help you? Regards, Kirill --- On Thu, 1/29/09, Robert Noland <rnoland@FreeBSD.org> wrote: > From: Robert Noland <rnoland@FreeBSD.org> > Subject: Re: Problems with hardware rendering on i865 > To: ykirill@yahoo.com > Cc: freebsd-x11@freebsd.org > Date: Thursday, January 29, 2009, 4:17 PM > On Thu, 2009-01-29 at 00:17 -0800, Kirill Yelizarov wrote: > > Robert, > > I tried tiling off but got another error: > > This makes me suspect that something is still wrong with > 855 and now > apparrently 865 agp... It may be something wrong with the > way the > driver is requesting memory from agp, but I'll still > need a debugging > version of agp to figure it out. Which FreeBSD version are > you running? > > robert. > > > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > > (II) Module vgahw: vendor="X.Org Foundation" > > compiled for 1.5.3, module version = 0.1.0 > > ABI class: X.Org Video Driver, version 4.1 > > (**) intel(0): Depth 24, (--) framebuffer bpp 32 > > (==) intel(0): RGB weight 888 > > (==) intel(0): Default visual is TrueColor > > (**) intel(0): Option "AccelMethod" > "EXA" > > (**) intel(0): Option "DRI" "true" > > (**) intel(0): Option "Tiling" > "off" > > (II) intel(0): Integrated Graphics Chipset: Intel(R) > 865G > > (--) intel(0): Chipset: "865G" > > (--) intel(0): Linear framebuffer at 0xF0000000 > > (--) intel(0): IO registers at addr 0xFFA80000 > > (**) intel(0): Using EXA for acceleration > > (II) intel(0): 1 display pipe available. > > (II) Loading sub module "ddc" > > (II) LoadModule: "ddc" > > (II) Module "ddc" already built-in > > (II) Loading sub module "i2c" > > (II) LoadModule: "i2c" > > (II) Module "i2c" already built-in > > (II) intel(0): Output VGA using monitor section Sony > > (II) intel(0): I2C bus "DVODDC_D" > initialized. > > (II) Loading sub module "sil164" > > (II) LoadModule: "sil164" > > > > (II) Loading > /usr/local/lib/xorg/modules/drivers//sil164.so > > (II) Module sil164: vendor="X.Org > Foundation" > > compiled for 1.5.3, module version = 1.0.0 > > ABI class: X.Org Video Driver, version 4.1 > > (II) intel(0): I2C bus "DVOI2C_E" > initialized. > > (II) Loading sub module "ch7xxx" > > (II) LoadModule: "ch7xxx" > > > > (II) Loading > /usr/local/lib/xorg/modules/drivers//ch7xxx.so > > (II) Module ch7xxx: vendor="X.Org > Foundation" > > compiled for 1.5.3, module version = 1.0.0 > > ABI class: X.Org Video Driver, version 4.1 > > (II) intel(0): I2C bus "DVOI2C_E" removed. > > (II) intel(0): I2C bus "DVOI2C_E" > initialized. > > (II) Loading sub module "ivch" > > (II) LoadModule: "ivch" > > > > (II) Loading > /usr/local/lib/xorg/modules/drivers//ivch.so > > (II) Module ivch: vendor="X.Org Foundation" > > compiled for 1.5.3, module version = 1.0.0 > > ABI class: X.Org Video Driver, version 4.1 > > (II) intel(0): I2C bus "DVOI2C_E" removed. > > (II) intel(0): I2C bus "DVOI2C_B" > initialized. > > (II) Loading sub module "tfp410" > > (II) LoadModule: "tfp410" > > > > (II) Loading > /usr/local/lib/xorg/modules/drivers//tfp410.so > > (II) Module tfp410: vendor="X.Org > Foundation" > > compiled for 1.5.3, module version = 1.0.0 > > ABI class: X.Org Video Driver, version 4.1 > > (II) intel(0): I2C bus "DVOI2C_B" removed. > > (II) intel(0): I2C bus "DVOI2C_E" > initialized. > > (II) Loading sub module "ch7017" > > (II) LoadModule: "ch7017" > > > > .... > > (II) Loading sub module "fb" > > (II) LoadModule: "fb" > > > > (II) Loading /usr/local/lib/xorg/modules//libfb.so > > (II) Module fb: vendor="X.Org Foundation" > > compiled for 1.5.3, module version = 1.0.0 > > ABI class: X.Org ANSI C Emulation, version 0.4 > > (II) Loading sub module "exa" > > (II) LoadModule: "exa" > > > > (II) Loading /usr/local/lib/xorg/modules//libexa.so > > (II) Module exa: vendor="X.Org Foundation" > > compiled for 1.5.3, module version = 2.4.0 > > ABI class: X.Org Video Driver, version 4.1 > > (II) Loading sub module "ramdac" > > (II) LoadModule: "ramdac" > > (II) Module "ramdac" already built-in > > (II) intel(0): Comparing regs from server start up to > After PreInit > > (II) Loading sub module "dri" > > (II) LoadModule: "dri" > > > > (II) Reloading > /usr/local/lib/xorg/modules/extensions//libdri.so > > (==) Depth 24 pixmap format is 32 bpp > > (II) do I need RAC? No, I don't. > > (II) resource ranges after preInit: > > [0] -1 0 0x00100000 - 0x3fffffff > (0x3ff00000) MX[B]E(B) > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) > MX[B] > > [2] -1 0 0x000c0000 - 0x000effff (0x30000) > MX[B] > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) > MX[B] > > [4] 0 0 0x000a0000 - 0x000affff (0x10000) > MS[B](OprD) > > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) > MS[B](OprD) > > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) > MS[B](OprD) > > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > > [8] -1 0 0x00000000 - 0x000000ff (0x100) > IX[B] > > [9] 0 0 0x000003b0 - 0x000003bb (0xc) > IS[B](OprU) > > [10] 0 0 0x000003c0 - 0x000003df (0x20) > IS[B](OprU) > > (II) intel(0): Kernel reported 241152 total, 0 used > > (II) intel(0): I830CheckAvailableMemory: 964608 kB > available > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 10, (OK) > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 10, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 10, (OK) > > drmOpenByBusid: drmOpenMinor returns 10 > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > > (II) [drm] DRM interface version 1.2 > > (II) [drm] DRM open master succeeded. > > (II) intel(0): [drm] Using the DRM lock SAREA also for > drawables. > > (II) intel(0): [drm] framebuffer mapped by ddx driver > > (II) intel(0): [drm] added 1 reserved context for > kernel > > (II) intel(0): X context handle = 0x2 > > (II) intel(0): [drm] installed DRM signal handler > > (**) intel(0): Framebuffer compression disabled > > (**) intel(0): Tiling disabled > > (==) intel(0): VideoRam: 131072 KB > > (II) intel(0): Attempting memory allocation with > untiled buffers. > > (WW) intel(0): Failed to allocate texture space. > > (II) intel(0): Untiled allocation failed. > > (II) intel(0): Couldn't allocate 3D memory, > disabling DRI. > > (II) intel(0): Attempting memory allocation with > untiled buffers. > > (II) intel(0): Untiled allocation successful. > > (II) intel(0): Page Flipping disabled > > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is > 0x03d0, hwp->PIOOffset is 0x0000 > > (==) intel(0): Write-combining range (0xa0000,0x10000) > was already clear > > (**) intel(0): Option "MigrationHeuristic" > "greedy" > > (**) intel(0): Option "EXANoComposite" > "false" > > (II) EXA(0): Offscreen pixmap area of 50135040 bytes > > (II) EXA(0): Driver registered support for the > following operations: > > (II) Solid > > (II) Copy > > (II) Composite (RENDER acceleration) > > (==) intel(0): Backing store disabled > > (==) intel(0): Silken mouse enabled > > (II) intel(0): Initializing HW Cursor > > (II) intel(0): xf86BindGARTMemory: bind key 19 at > 0x00fdf000 (pgoffset 4063) > > (II) intel(0): xf86BindGARTMemory: bind key 20 at > 0x00fe0000 (pgoffset 4064) > > (II) intel(0): xf86BindGARTMemory: bind key 21 at > 0x01fd0000 (pgoffset 8144) > > (II) intel(0): Fixed memory allocation layout: > > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 > kB) > > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20 > kB) > > (II) intel(0): 0x00025000-0x0002cfff: logical 3D > context (32 kB) > > (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr > (1024 kB) > > (II) intel(0): 0x00fdf000: end of stolen > memory > > (II) intel(0): 0x00fdf000-0x00fdffff: overlay > registers (4 kB, 0x0000000011be9000 physical > > ) > > (II) intel(0): 0x00fe0000-0x01fcffff: front buffer > (16320 kB) > > (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen > (48960 kB) > > (II) intel(0): 0x08000000: end of aperture > > (II) intel(0): Output configuration: > > (II) intel(0): Pipe A is on > > (II) intel(0): Display plane A is now enabled and > connected to pipe A. > > (II) intel(0): Output VGA is connected to pipe A > > (II) intel(0): RandR 1.2 enabled, ignore the following > RandR disabled message. > > (**) Option "dpms" "true" > > (**) intel(0): DPMS enabled > > (II) intel(0): Set up overlay video > > (II) intel(0): direct rendering: Failed > > (--) RandR disabled > > (II) Initializing built-in extension MIT-SHM > > (II) Initializing built-in extension XInputExtension > > (II) Initializing built-in extension XTEST > > (II) Initializing built-in extension XKEYBOARD > > (II) Initializing built-in extension XINERAMA > > (II) Initializing built-in extension XFIXES > > (II) Initializing built-in extension RENDER > > (II) Initializing built-in extension RANDR > > (II) Initializing built-in extension COMPOSITE > > (II) Initializing built-in extension DAMAGE > > (II) Initializing built-in extension XEVIE > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 11, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 11, (OK) > > drmOpenByBusid: drmOpenMinor returns 11 > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > > (EE) AIGLX error: Calling driver entry point > failed(EE) AIGLX: reverting to software rendering > > (II) AIGLX: Loaded and initialized > /usr/local/lib/dri/swrast_dri.so > > (II) GLX: Initialized DRISWRAST GL provider for screen > 0 > > (II) intel(0): Setting screen physical size to 359 x > 287 > > (II) config/hal: Adding input device AT Keyboard > > (II) LoadModule: "kbd" > > > > Regards, > > Kirill > > > > > > > > --- On Wed, 1/28/09, Robert Noland > <rnoland@FreeBSD.org> wrote: > > > > > From: Robert Noland <rnoland@FreeBSD.org> > > > Subject: Re: Problems with hardware rendering on > i865 > > > To: ykirill@yahoo.com > > > Cc: freebsd-x11@freebsd.org > > > Date: Wednesday, January 28, 2009, 7:09 PM > > > On Wed, 2009-01-28 at 06:33 -0800, Kirill > Yelizarov wrote: > > > > Hi > > > > > > > > I have problems with hardware rendering > configuration. > > > I have all recent updates of Releng-7 and ports > (xorg-7.4). > > > glxgears shows about 28fps when full screen. How > can i > > > enable hardware rendering or i'm just wasting > my time > > > with this card? Any hints? > > > > > > > > Thank You, > > > > Kirill > > > > > > > > P.S. Sorry, this letter is big > > > > > > > > Here is dmesg: > > > > Copyright (c) 1992-2009 The FreeBSD Project. > > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, > 1989, > > > 1991, 1992, 1993, 1994 > > > > The Regents of the University of > California. All > > > rights reserved. > > > > FreeBSD is a registered trademark of The > FreeBSD > > > Foundation. > > > > FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 > MSK 2009 > > > > > root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV > > > > Timecounter "i8254" frequency > 1193182 Hz > > > quality 0 > > > > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz > (2992.52-MHz > > > 686-class CPU) > > > > Origin = "GenuineIntel" Id = > 0xf41 > > > Stepping = 1 > > > > > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > > > > > > Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR> > > > > Logical CPUs per core: 2 > > > > real memory = 1056108544 (1007 MB) > > > > avail memory = 1023971328 (976 MB) > > > > ACPI APIC Table: <INTEL D865GVHZ> > > > > FreeBSD/SMP: Multiprocessor System Detected: > 2 CPUs > > > > cpu0 (BSP): APIC ID: 0 > > > > cpu1 (AP): APIC ID: 1 > > > > ioapic0 <Version 2.0> irqs 0-23 on > motherboard > > > > netsmb_dev: loaded > > > > kbd1 at kbdmux0 > > > > acpi0: <INTEL D865GVHZ> on motherboard > > > > acpi0: [ITHREAD] > > > > acpi0: Power Button (fixed) > > > > acpi0: reservation of 0, a0000 (3) failed > > > > acpi0: reservation of 100000, 3ef00000 (3) > failed > > > > Timecounter "ACPI-fast" frequency > 3579545 Hz > > > quality 1000 > > > > acpi_timer0: <24-bit timer at > 3.579545MHz> port > > > 0x408-0x40b on acpi0 > > > > pcib0: <ACPI Host-PCI bridge> port > 0xcf8-0xcff > > > on acpi0 > > > > pci0: <ACPI PCI bus> on pcib0 > > > > vgapci0: <VGA-compatible display> port > > > 0xec00-0xec07 mem > > > 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq > 16 at device > > > 2.0 on pci0 > > > > agp0: <Intel 82865G (865G GMCH) SVGA > controller> > > > on vgapci0 > > > > agp0: detected 16252k stolen memory > > > > agp0: aperture size is 128M > > > > drm0: <Intel i865G GMCH> on vgapci0 > > > > vgapci0: child drm0 requested > pci_enable_busmaster > > > > info: [drm] AGP at 0xf0000000 128MB > > > > info: [drm] Initialized i915 1.6.0 20080730 > > > > ... I removed the rest of dmesg to save > space > > > > > > > > My xorg.conf: > > > > Section "Module" > > > > Load "dbe" # > Double buffer extension > > > > Load "GLcore" > > > > Load "freetype" > > > > Load "glx" > > > > Load "dri" > > > > EndSection > > > > > > > > Section "Files" > > > > > > > FontPath > "/usr/local/lib/X11/fonts/winfonts/" > > > > > > > FontPath > "/usr/local/lib/X11/fonts/koi8-1/misc/" > > > > > > > FontPath > "/usr/local/lib/X11/fonts/koi8-1/75dpi/" > > > > FontPath > "/usr/local/lib/X11/fonts/misc/" > > > > FontPath > "/usr/local/lib/X11/fonts/URW/" > > > > EndSection > > > > > > > > Section "ServerFlags" > > > > > > > > EndSection > > > > > > > > Section "Monitor" > > > > Identifier "Sony" > > > > HorizSync 31.5 - 85.0 > > > > VertRefresh 50-70 > > > > Option "DPMS" > "true" > > > > EndSection > > > > > > > > Section "Device" > > > > Identifier "I865" > > > > Driver "intel" > > > > VendorName "Intel > Corporation" > > > > Option "DRI" > "true" > > > > # Option "AccelMethod" > "NONE" > > > > Option "AccelMethod" > "EXA" > > > > Option > "MigrationHeuristic" > > > "greedy" > > > > Option "ExaNoComposite" > "false" > > > > EndSection > > > > > > > > Section "Screen" > > > > Identifier "LCD_Screen" > > > > Device "I865" > > > > Monitor "Sony" > > > > DefaultDepth 24 > > > > > > > > Subsection "Display" > > > > Depth 24 > > > > Modes "1280x1024" > > > > ViewPort 0 0 > > > > Virtual 2040 2040 > > > > EndSubsection > > > > EndSection > > > > > > > > Section "ServerLayout" > > > > Identifier "Simple Layout" > > > > Option "AIGLX" > "true" > > > > Screen "LCD_Screen" > > > > EndSection > > > > > > > > Section "DRI" > > > > Group 0 > > > > Mode 0666 > > > > EndSection > > > > > > > > Section "Extensions" > > > > Option "Composite" > "Enable" > > > > Option "RENDER" > "Enable" > > > > Option "DAMAGE" > "Enable" > > > > EndSection > > > > > > > > > > > > And here is Xorg log: > > > > X.Org X Server 1.5.3 > > > > Release Date: 5 November 2008 > > > > X Protocol Version 11, Revision 0 > > > > Build Operating System: FreeBSD 7.1-STABLE > i386 > > > > Current Operating System: FreeBSD > mysrv.faberlic.com > > > 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 > 16:46:24 MSK > > > 2009 > root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV > > > i386 > > > > Build Date: 28 January 2009 12:25:29PM > > > > > > > > Before reporting problems, check > http://wiki.x.org > > > > to make sure that you have the latest > version. > > > > Markers: (--) probed, (**) from config file, > (==) > > > default setting, > > > > (++) from command line, (!!) notice, > (II) > > > informational, > > > > (WW) warning, (EE) error, (NI) not > implemented, (??) > > > unknown. > > > > (==) Log file: > "/var/log/Xorg.0.log", Time: > > > Wed Jan 28 17:04:03 2009 > > > > (==) Using config file: > "/etc/X11/xorg.conf" > > > > (==) ServerLayout "Simple Layout" > > > > (**) |-->Screen "LCD_Screen" > (0) > > > > (**) | |-->Monitor "Sony" > > > > (**) | |-->Device "I865" > > > > (**) Option "AIGLX" > "true" > > > > (==) Automatically adding devices > > > > (==) Automatically enabling devices > > > > (==) Including the default font path > > > > /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/. > > > > (**) FontPath set to: > > > > /usr/local/lib/X11/fonts/winfonts/, > > > > /usr/local/lib/X11/fonts/koi8-1/misc/, > > > > /usr/local/lib/X11/fonts/koi8-1/75dpi/, > > > > /usr/local/lib/X11/fonts/misc/, > > > > /usr/local/lib/X11/fonts/URW/, > > > > /usr/local/lib/X11/fonts/misc/, > > > > /usr/local/lib/X11/fonts/TTF/, > > > > /usr/local/lib/X11/fonts/OTF, > > > > /usr/local/lib/X11/fonts/Type1/, > > > > /usr/local/lib/X11/fonts/100dpi/, > > > > /usr/local/lib/X11/fonts/75dpi/ > > > > (==) ModulePath set to > > > "/usr/local/lib/xorg/modules" > > > > (**) Extension "Composite" is > enabled > > > > (**) Extension "RENDER" is enabled > > > > (**) Extension "DAMAGE" is enabled > > > > (II) Cannot locate a core pointer device. > > > > (II) Cannot locate a core keyboard device. > > > > (II) The server relies on HAL to provide the > list of > > > input devices. > > > > If no devices become available, > reconfigure HAL or > > > disable AllowEmptyInput. > > > > (II) Loader magic: 0x81ab3c0 > > > > (II) Module ABI versions: > > > > X.Org ANSI C Emulation: 0.4 > > > > X.Org Video Driver: 4.1 > > > > X.Org XInput driver : 2.1 > > > > X.Org Server Extension : 1.1 > > > > X.Org Font Renderer : 0.6 > > > > (II) Loader running on freebsd > > > > (--) Using syscons driver with X support > (version 2.0) > > > > (--) using VT number 9 > > > > > > > > (--) PCI:*(0@0:2:0) Intel Corporation 82865G > > > Integrated Graphics Controller rev 0, Mem @ > 0xf0000000/0, > > > 0xffa80000/0, I/O @ 0x0000ec00/0, BIOS @ > 0x????????/65536 > > > > (II) System resource ranges: > > > > [0] -1 0 0x00100000 - 0x3fffffff > (0x3ff00000) > > > MX[B]E(B) > > > > [1] -1 0 0x000f0000 - 0x000fffff > (0x10000) MX[B] > > > > [2] -1 0 0x000c0000 - 0x000effff > (0x30000) MX[B] > > > > [3] -1 0 0x00000000 - 0x0009ffff > (0xa0000) MX[B] > > > > [4] -1 0 0x0000ffff - 0x0000ffff > (0x1) IX[B] > > > > [5] -1 0 0x00000000 - 0x000000ff > (0x100) IX[B] > > > > (II) "extmod" will be loaded by > default. > > > > (II) "dbe" will be loaded. This > was enabled > > > by default and also specified in the config file. > > > > (II) "glx" will be loaded. This > was enabled > > > by default and also specified in the config file. > > > > (II) "freetype" will be loaded. > This was > > > enabled by default and also specified in the > config file. > > > > (II) "record" will be loaded by > default. > > > > (II) "dri" will be loaded. This > was enabled > > > by default and also specified in the config file. > > > > (II) LoadModule: "dbe" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/extensions//libdbe.so > > > > (II) Module dbe: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > Module class: X.Org Server Extension > > > > ABI class: X.Org Server Extension, > version 1.1 > > > > (II) Loading extension DOUBLE-BUFFER > > > > (II) LoadModule: "freetype" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/fonts//libfreetype.so > > > > (II) Module freetype: vendor="X.Org > Foundation > > > & the After X-TT Project" > > > > compiled for 1.5.3, module version = > 2.1.0 > > > > Module class: X.Org Font Renderer > > > > ABI class: X.Org Font Renderer, version > 0.6 > > > > (II) Loading font FreeType > > > > (II) LoadModule: "glx" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/extensions//libglx.so > > > > (II) Module glx: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Server Extension, > version 1.1 > > > > (**) AIGLX enabled > > > > (**) Exporting typical set of GLX visuals > > > > (II) Loading extension GLX > > > > (II) LoadModule: "dri" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/extensions//libdri.so > > > > (II) Module dri: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Server Extension, > version 1.1 > > > > (II) Loading extension XFree86-DRI > > > > (II) LoadModule: "extmod" > > > > > > > > (II) Loading > > > > /usr/local/lib/xorg/modules/extensions//libextmod.so > > > > (II) Module extmod: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > Module class: X.Org Server Extension > > > > ABI class: X.Org Server Extension, > version 1.1 > > > > (II) Loading extension SHAPE > > > > (II) Loading extension > MIT-SUNDRY-NONSTANDARD > > > > (II) Loading extension BIG-REQUESTS > > > > (II) Loading extension SYNC > > > > (II) Loading extension MIT-SCREEN-SAVER > > > > (II) Loading extension XC-MISC > > > > (II) Loading extension > XFree86-VidModeExtension > > > > (II) Loading extension XFree86-Misc > > > > (II) Loading extension XFree86-DGA > > > > (II) Loading extension DPMS > > > > (II) Loading extension TOG-CUP > > > > (II) Loading extension > Extended-Visual-Information > > > > (II) Loading extension XVideo > > > > (II) Loading extension > XVideo-MotionCompensation > > > > (II) Loading extension X-Resource > > > > (II) LoadModule: "record" > > > > > > > > (II) Loading > > > > /usr/local/lib/xorg/modules/extensions//librecord.so > > > > (II) Module record: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.13.0 > > > > Module class: X.Org Server Extension > > > > ABI class: X.Org Server Extension, > version 1.1 > > > > (II) Loading extension RECORD > > > > (II) LoadModule: "intel" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//intel_drv.so > > > > (II) Module intel: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 2.5.1 > > > > Module class: X.Org Video Driver > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel: Driver for Intel Integrated > Graphics > > > Chipsets: i810, > > > > i810-dc100, i810e, i815, i830M, 845G, > 852GM/855GM, > > > 865G, 915G, > > > > E7221 (i915), 915GM, 945G, 945GM, > 945GME, 965G, G35, > > > 965Q, 946GZ, > > > > 965GM, 965GME/GLE, G33, Q35, Q33, > > > > Mobile Intel\u00ae GM45 Express > Chipset, > > > > Intel Integrated Graphics Device, > G45/G43, Q45/Q43, > > > G41 > > > > (II) Primary Device is: PCI 00@00:02:0 > > > > (II) resource ranges after > xf86ClaimFixedResources() > > > call: > > > > [0] -1 0 0x00100000 - 0x3fffffff > (0x3ff00000) > > > MX[B]E(B) > > > > [1] -1 0 0x000f0000 - 0x000fffff > (0x10000) MX[B] > > > > [2] -1 0 0x000c0000 - 0x000effff > (0x30000) MX[B] > > > > [3] -1 0 0x00000000 - 0x0009ffff > (0xa0000) MX[B] > > > > [4] -1 0 0x0000ffff - 0x0000ffff > (0x1) IX[B] > > > > [5] -1 0 0x00000000 - 0x000000ff > (0x100) IX[B] > > > > (II) resource ranges after probing: > > > > [0] -1 0 0x00100000 - 0x3fffffff > (0x3ff00000) > > > MX[B]E(B) > > > > [1] -1 0 0x000f0000 - 0x000fffff > (0x10000) MX[B] > > > > [2] -1 0 0x000c0000 - 0x000effff > (0x30000) MX[B] > > > > [3] -1 0 0x00000000 - 0x0009ffff > (0xa0000) MX[B] > > > > [4] 0 0 0x000a0000 - 0x000affff > (0x10000) MS[B] > > > > [5] 0 0 0x000b0000 - 0x000b7fff > (0x8000) MS[B] > > > > [6] 0 0 0x000b8000 - 0x000bffff > (0x8000) MS[B] > > > > [7] -1 0 0x0000ffff - 0x0000ffff > (0x1) IX[B] > > > > [8] -1 0 0x00000000 - 0x000000ff > (0x100) IX[B] > > > > [9] 0 0 0x000003b0 - 0x000003bb > (0xc) IS[B] > > > > [10] 0 0 0x000003c0 - 0x000003df > (0x20) IS[B] > > > > (II) Loading sub module "vgahw" > > > > (II) LoadModule: "vgahw" > > > > > > > > (II) Loading > /usr/local/lib/xorg/modules//libvgahw.so > > > > (II) Module vgahw: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 0.1.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (**) intel(0): Depth 24, (--) framebuffer > bpp 32 > > > > (==) intel(0): RGB weight 888 > > > > (==) intel(0): Default visual is TrueColor > > > > (**) intel(0): Option > "AccelMethod" > > > "EXA" > > > > (**) intel(0): Option "DRI" > "true" > > > > (II) intel(0): Integrated Graphics Chipset: > Intel(R) > > > 865G > > > > (--) intel(0): Chipset: "865G" > > > > (--) intel(0): Linear framebuffer at > 0xF0000000 > > > > (--) intel(0): IO registers at addr > 0xFFA80000 > > > > (**) intel(0): Using EXA for acceleration > > > > (II) intel(0): 1 display pipe available. > > > > (II) Loading sub module "ddc" > > > > (II) LoadModule: "ddc" > > > > (II) Module "ddc" already built-in > > > > (II) Loading sub module "i2c" > > > > (II) LoadModule: "i2c" > > > > (II) Module "i2c" already built-in > > > > (II) intel(0): Output VGA using monitor > section Sony > > > > (II) intel(0): I2C bus "DVODDC_D" > > > initialized. > > > > (II) Loading sub module "sil164" > > > > (II) LoadModule: "sil164" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//sil164.so > > > > (II) Module sil164: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel(0): I2C bus "DVOI2C_E" > > > initialized. > > > > (II) Loading sub module "ch7xxx" > > > > (II) LoadModule: "ch7xxx" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//ch7xxx.so > > > > (II) Module ch7xxx: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel(0): I2C bus "DVOI2C_E" > removed. > > > > (II) intel(0): I2C bus "DVOI2C_E" > > > initialized. > > > > (II) Loading sub module "ivch" > > > > (II) LoadModule: "ivch" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//ivch.so > > > > (II) Module ivch: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel(0): I2C bus "DVOI2C_E" > removed. > > > > (II) intel(0): I2C bus "DVOI2C_B" > > > initialized. > > > > (II) Loading sub module "tfp410" > > > > (II) LoadModule: "tfp410" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//tfp410.so > > > > (II) Module tfp410: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel(0): I2C bus "DVOI2C_B" > removed. > > > > (II) intel(0): I2C bus "DVOI2C_E" > > > initialized. > > > > (II) Loading sub module "ch7017" > > > > (II) LoadModule: "ch7017" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/drivers//ch7017.so > > > > (II) Module ch7017: vendor="X.Org > > > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) intel(0): I2C bus "DVOI2C_E" > removed. > > > > (II) intel(0): I2C bus "DVOI2C_E" > > > initialized. > > > > (II) intel(0): I2C bus "DVOI2C_E" > removed. > > > > (II) intel(0): I2C bus "DVODDC_D" > removed. > > > > (==) intel(0): Write-combining range > (0xa0000,0x10000) > > > was already clear > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Output VGA connected > > > > (II) intel(0): Using user preference for > initial modes > > > > (II) intel(0): Output VGA using initial mode > 1280x1024 > > > > (==) intel(0): Write-combining range > (0xa0000,0x10000) > > > was already clear > > > > (II) intel(0): detected 128 kB GTT. > > > > (II) intel(0): detected 16252 kB stolen > memory. > > > > (==) intel(0): video overlay key set to > 0x101fe > > > > (==) intel(0): Intel XvMC decoder disabled > > > > (==) intel(0): Will not try to enable page > flipping > > > > (==) intel(0): Triple buffering disabled > > > > (==) intel(0): Using gamma correction (1.0, > 1.0, 1.0) > > > > (**) intel(0): Display dimensions: (340, > 270) mm > > > > (**) intel(0): DPI set to (152, 191) > > > > (II) Loading sub module "fb" > > > > (II) LoadModule: "fb" > > > > > > > > (II) Loading > /usr/local/lib/xorg/modules//libfb.so > > > > (II) Module fb: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.0.0 > > > > ABI class: X.Org ANSI C Emulation, > version 0.4 > > > > (II) Loading sub module "exa" > > > > (II) LoadModule: "exa" > > > > > > > > (II) Loading > /usr/local/lib/xorg/modules//libexa.so > > > > (II) Module exa: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 2.4.0 > > > > ABI class: X.Org Video Driver, version > 4.1 > > > > (II) Loading sub module "ramdac" > > > > (II) LoadModule: "ramdac" > > > > (II) Module "ramdac" already > built-in > > > > (II) intel(0): Comparing regs from server > start up to > > > After PreInit > > > > (II) Loading sub module "dri" > > > > (II) LoadModule: "dri" > > > > > > > > (II) Reloading > > > /usr/local/lib/xorg/modules/extensions//libdri.so > > > > (==) Depth 24 pixmap format is 32 bpp > > > > (II) do I need RAC? No, I don't. > > > > (II) resource ranges after preInit: > > > > [0] -1 0 0x00100000 - 0x3fffffff > (0x3ff00000) > > > MX[B]E(B) > > > > [1] -1 0 0x000f0000 - 0x000fffff > (0x10000) MX[B] > > > > [2] -1 0 0x000c0000 - 0x000effff > (0x30000) MX[B] > > > > [3] -1 0 0x00000000 - 0x0009ffff > (0xa0000) MX[B] > > > > [4] 0 0 0x000a0000 - 0x000affff > (0x10000) MS[B](OprD) > > > > [5] 0 0 0x000b0000 - 0x000b7fff > (0x8000) MS[B](OprD) > > > > [6] 0 0 0x000b8000 - 0x000bffff > (0x8000) MS[B](OprD) > > > > [7] -1 0 0x0000ffff - 0x0000ffff > (0x1) IX[B] > > > > [8] -1 0 0x00000000 - 0x000000ff > (0x100) IX[B] > > > > [9] 0 0 0x000003b0 - 0x000003bb > (0xc) IS[B](OprU) > > > > [10] 0 0 0x000003c0 - 0x000003df > (0x20) IS[B](OprU) > > > > (II) intel(0): Kernel reported 241152 total, > 0 used > > > > (II) intel(0): I830CheckAvailableMemory: > 964608 kB > > > available > > > > drmOpenDevice: node name is /dev/dri/card0 > > > > drmOpenDevice: open result is 10, (OK) > > > > drmOpenDevice: node name is /dev/dri/card0 > > > > drmOpenDevice: open result is 10, (OK) > > > > drmOpenByBusid: Searching for BusID > pci:0000:00:02.0 > > > > drmOpenDevice: node name is /dev/dri/card0 > > > > drmOpenDevice: open result is 10, (OK) > > > > drmOpenByBusid: drmOpenMinor returns 10 > > > > drmOpenByBusid: drmGetBusid reports > pci:0000:00:02.0 > > > > (II) [drm] DRM interface version 1.2 > > > > (II) [drm] DRM open master succeeded. > > > > (II) intel(0): [drm] Using the DRM lock > SAREA also for > > > drawables. > > > > (II) intel(0): [drm] framebuffer mapped by > ddx driver > > > > (II) intel(0): [drm] added 1 reserved > context for > > > kernel > > > > (II) intel(0): X context handle = 0x1 > > > > (II) intel(0): [drm] installed DRM signal > handler > > > > (**) intel(0): Framebuffer compression > disabled > > > > (**) intel(0): Tiling enabled > > > > (==) intel(0): VideoRam: 131072 KB > > > > (II) intel(0): Attempting memory allocation > with tiled > > > buffers. > > > > (WW) intel(0): Failed to allocate texture > space. > > > > (II) intel(0): Tiled allocation failed. > > > > (II) intel(0): Attempting memory allocation > with > > > untiled buffers. > > > > (WW) intel(0): Failed to allocate texture > space. > > > > (II) intel(0): Untiled allocation failed. > > > > (II) intel(0): Couldn't allocate 3D > memory, > > > disabling DRI. > > > > (II) intel(0): Attempting memory allocation > with > > > untiled buffers. > > > > (II) intel(0): Untiled allocation > successful. > > > > > > There is some problem on 855 class hardware with > agp/drm > > > and tiled > > > buffers. I need to get a debugging build of agp > to see if > > > I can figure > > > out what is going on. Try disabling tiled > buffers and see > > > if that > > > helps. Option "Tiling" "off" > in the > > > Device section. > > > > > > robert. > > > > > > > (II) intel(0): Page Flipping disabled > > > > (II) intel(0): vgaHWGetIOBase: > hwp->IOBase is > > > 0x03d0, hwp->PIOOffset is 0x0000 > > > > (==) intel(0): Write-combining range > (0xa0000,0x10000) > > > was already clear > > > > (**) intel(0): Option > "MigrationHeuristic" > > > "greedy" > > > > (**) intel(0): Option > "EXANoComposite" > > > "false" > > > > (II) EXA(0): Offscreen pixmap area of > 50135040 bytes > > > > (II) EXA(0): Driver registered support for > the > > > following operations: > > > > (II) Solid > > > > (II) Copy > > > > (II) Composite (RENDER acceleration) > > > > (==) intel(0): Backing store disabled > > > > (==) intel(0): Silken mouse enabled > > > > (II) intel(0): Initializing HW Cursor > > > > (II) intel(0): xf86BindGARTMemory: bind key > 11 at > > > 0x00fdf000 (pgoffset 4063) > > > > (II) intel(0): xf86BindGARTMemory: bind key > 12 at > > > 0x00fe0000 (pgoffset 4064) > > > > (II) intel(0): xf86BindGARTMemory: bind key > 13 at > > > 0x01fd0000 (pgoffset 8144) > > > > (II) intel(0): Fixed memory allocation > layout: > > > > (II) intel(0): 0x00000000-0x0001ffff: ring > buffer (128 > > > kB) > > > > (II) intel(0): 0x00020000-0x00024fff: HW > cursors (20 > > > kB) > > > > (II) intel(0): 0x00025000-0x0002cfff: > logical 3D > > > context (32 kB) > > > > (II) intel(0): 0x0002d000-0x0012cfff: fake > bufmgr > > > (1024 kB) > > > > (II) intel(0): 0x00fdf000: end of > stolen > > > memory > > > > (II) intel(0): 0x00fdf000-0x00fdffff: > overlay > > > registers (4 kB, 0x000000000823b000 physical > > > > ) > > > > (II) intel(0): 0x00fe0000-0x01fcffff: front > buffer > > > (16320 kB) > > > > (II) intel(0): 0x01fd0000-0x04f9ffff: exa > offscreen > > > (48960 kB) > > > > (II) intel(0): 0x08000000: end of > aperture > > > > (II) intel(0): Output configuration: > > > > (II) intel(0): Pipe A is on > > > > (II) intel(0): Display plane A is now > enabled and > > > connected to pipe A. > > > > (II) intel(0): Output VGA is connected to > pipe A > > > > (II) intel(0): RandR 1.2 enabled, ignore the > following > > > RandR disabled message. > > > > (**) Option "dpms" > "true" > > > > (**) intel(0): DPMS enabled > > > > (II) intel(0): Set up overlay video > > > > (II) intel(0): direct rendering: Failed > > > > (--) RandR disabled > > > > (II) Initializing built-in extension MIT-SHM > > > > (II) Initializing built-in extension > XInputExtension > > > > (II) Initializing built-in extension XTEST > > > > (II) Initializing built-in extension > XKEYBOARD > > > > (II) Initializing built-in extension > XINERAMA > > > > (II) Initializing built-in extension XFIXES > > > > (II) Initializing built-in extension RENDER > > > > (II) Initializing built-in extension RANDR > > > > (II) Initializing built-in extension > COMPOSITE > > > > (II) Initializing built-in extension DAMAGE > > > > (II) Initializing built-in extension XEVIE > > > > drmOpenDevice: node name is /dev/dri/card0 > > > > drmOpenDevice: open result is 11, (OK) > > > > drmOpenByBusid: Searching for BusID > pci:0000:00:02.0 > > > > drmOpenDevice: node name is /dev/dri/card0 > > > > drmOpenDevice: open result is 11, (OK) > > > > drmOpenByBusid: drmOpenMinor returns 11 > > > > drmOpenByBusid: drmGetBusid reports > pci:0000:00:02.0 > > > > (EE) AIGLX error: Calling driver entry point > > > failed(EE) AIGLX: reverting to software rendering > > > > (II) AIGLX: Loaded and initialized > > > /usr/local/lib/dri/swrast_dri.so > > > > (II) GLX: Initialized DRISWRAST GL provider > for screen > > > 0 > > > > (II) intel(0): Setting screen physical size > to 359 x > > > 287 > > > > (II) config/hal: Adding input device AT > Keyboard > > > > (II) LoadModule: "kbd" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/input//kbd_drv.so > > > > (II) Module kbd: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.3.2 > > > > Module class: X.Org XInput Driver > > > > ABI class: X.Org XInput driver, version > 2.1 > > > > (**) AT Keyboard: always reports core events > > > > (**) Option "Protocol" > "standard" > > > > (**) AT Keyboard: Protocol: standard > > > > (**) Option "AutoRepeat" "500 > 30" > > > > (**) Option "XkbRules" > "base" > > > > (**) AT Keyboard: XkbRules: "base" > > > > (**) Option "XkbModel" > "pc105" > > > > (**) AT Keyboard: XkbModel: > "pc105" > > > > (**) Option "XkbLayout" > "us,ru" > > > > (**) AT Keyboard: XkbLayout: > "us,ru" > > > > (**) Option "XkbVariant" > > > ",winkeys" > > > > (**) AT Keyboard: XkbVariant: > ",winkeys" > > > > (**) Option "XkbOptions" > > > "grp:ctrl_shift_toggle,grp_led:scroll" > > > > (**) AT Keyboard: XkbOptions: > > > "grp:ctrl_shift_toggle,grp_led:scroll" > > > > (**) Option "CustomKeycodes" > "off" > > > > (**) AT Keyboard: CustomKeycodes disabled > > > > (II) XINPUT: Adding extended input device > "AT > > > Keyboard" (type: KEYBOARD) > > > > (II) config/hal: Adding input device PS/2 > Mouse > > > > (II) LoadModule: "mouse" > > > > > > > > (II) Loading > > > /usr/local/lib/xorg/modules/input//mouse_drv.so > > > > (II) Module mouse: vendor="X.Org > Foundation" > > > > compiled for 1.5.3, module version = > 1.4.0 > > > > Module class: X.Org XInput Driver > > > > ABI class: X.Org XInput driver, version > 2.1 > > > > (**) PS/2 Mouse: Device: > "/dev/psm0" > > > > (==) PS/2 Mouse: Protocol: "Auto" > > > > (**) PS/2 Mouse: always reports core events > > > > (**) Option "Device" > "/dev/psm0" > > > > (==) PS/2 Mouse: Emulate3Buttons, > Emulate3Timeout: 50 > > > > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and > 5 > > > > (**) Option "EmulateWheel" > "true" > > > > (**) Option "EmulateWheelButton" > > > "2" > > > > (**) Option "EmulateWheelTimeout" > > > "200" > > > > (**) Option "XAxisMapping" "4 > 5" > > > > (**) PS/2 Mouse: XAxisMapping: buttons 4 and > 5 > > > > (**) Option "YAxisMapping" "6 > 7" > > > > (**) PS/2 Mouse: YAxisMapping: buttons 6 and > 7 > > > > (**) PS/2 Mouse: EmulateWheel, > EmulateWheelButton: 2, > > > EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > > > > (**) PS/2 Mouse: Buttons: 11 > > > > (**) PS/2 Mouse: Sensitivity: 1 > > > > (II) XINPUT: Adding extended input device > "PS/2 > > > Mouse" (type: MOUSE) > > > > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, > hw.model > > > is 10 > > > > (II) PS/2 Mouse: SetupAuto: protocol is > ExplorerPS/2 > > > > (II) PS/2 Mouse: ps2EnableDataReporting: > succeeded > > > > (WW) fcntl(12, O_ASYNC): Inappropriate ioctl > for > > > device > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > > > initialized. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > registered at address 0xA0. > > > > (II) intel(0): I2C device > "CRTDDC_A:ddc2" > > > removed. > > > > (II) intel(0): I2C bus "CRTDDC_A" > removed. > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > (II) intel(0): Using hsync ranges from > config file > > > > (II) intel(0): Using vrefresh ranges from > config file > > > > (II) intel(0): Printing DDC gathered > Modelines: > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (64.0 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 40.00 800 840 968 1056 600 601 605 628 +hsync > +vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 656 720 840 480 481 484 500 -hsync > -vsync (37.5 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 31.50 640 664 704 832 480 489 491 520 -hsync > -vsync (37.9 > > > kHz) > > > > (II) intel(0): Modeline > "640x480"x0.0 > > > 25.20 640 656 752 800 480 490 492 525 -hsync > -vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "720x400"x0.0 > > > 28.32 720 738 846 900 400 412 414 449 -hsync > +vsync (31.5 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x0.0 > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 > +hsync > > > +vsync (80.0 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 78.80 1024 1040 1136 1312 768 769 772 800 > +hsync +vsync > > > (60.1 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 75.00 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > > > (56.5 kHz) > > > > (II) intel(0): Modeline > "1024x768"x0.0 > > > 65.00 1024 1048 1184 1344 768 771 777 806 > -hsync -vsync > > > (48.4 kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 49.50 800 816 896 1056 600 601 604 625 +hsync > +vsync (46.9 > > > kHz) > > > > (II) intel(0): Modeline > "800x600"x0.0 > > > 50.00 800 856 976 1040 600 637 643 666 +hsync > +vsync (48.1 > > > kHz) > > > > (II) intel(0): Modeline > "1280x1024"x60.0 > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 > -hsync > > > +vsync (63.6 kHz) > > > > (II) intel(0): Modeline > "1280x960"x60.0 > > > 102.10 1280 1360 1496 1712 960 961 964 994 > -hsync +vsync > > > (59.6 kHz) > > > > (II) intel(0): EDID vendor "SNY", > prod id > > > 10096 > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > freebsd-x11@freebsd.org mailing list > > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > > > > To unsubscribe, send any mail to > > > "freebsd-x11-unsubscribe@freebsd.org" > > > > > > > > _______________________________________________ > > freebsd-x11@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > > To unsubscribe, send any mail to > "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?774620.19524.qm>