Date: Thu, 21 Jan 1999 19:56:10 -0600 From: Ric Naff <ricnaff@airmail.net> To: freebsd-questions@FreeBSD.ORG Subject: IOMega QIC-80/3020 card & FBSD 2.2.7 Message-ID: <36A7DABA.64750DB9@airmail.net>
next in thread | raw e-mail | index | archive | help
I've looked and searched every 'Net location I can find a link to. Really, I have. I can't find anything about the following hardware, so I don't expect anyone to have ***the*** answer. Yet, I am hopeful that someone could give me a list of things to try in my kernel source, existing driver source code, and MAKEDEV... I have a "Travan" tape device connected to my Pentium machine, 1 Adaptec 7880 SCSI on-board controller with 1 SCSI-2 ultra-wide drive, 2 floppy drives on 1 controller, 1 lpt, 2 serial, generic SVGA, and an external 6-disc CDROM juke box. The tape drive and controller are from IOMega - their "Ditto Dash" line. The drive itself may be connected to the floppy controller, or as is in my case, a custom card using DRQ3, and sharing IRQ2 with the floppy controller (i.e., the floppies and the tape cannot be used at the same time). It's at port address 0x370. The drive is IOMega's "QIC-3020", which with 2:1 compression, holds 3.2gB or 1.6gB without compression. The throughput with the custom card is so vastly superior over the generic floppy-controller hookup that I do not wish to abandon this card. It works great under Win95, PC-DOS 7.0, and Warp. I can't seem to find how to configure this card for FBSD 2.2.7. Can anyone please offer some "play with these settings" suggestions, or recommend a source code file for some similar device and how it is normally configured into the kernel? -- Ric Naff <ricnaff@airmail.net> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36A7DABA.64750DB9>