Date: Sat, 4 Dec 2004 08:00:58 GMT From: statue@netlab.cse.yzu.edu.tw To: freebsd-ports-bugs@FreeBSD.org Subject: Re: ports/74661: New port: chinese/scim-chewing Message-ID: <200412040800.iB480wmW079656@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/74661; it has been noted by GNATS. From: statue@netlab.cse.yzu.edu.tw To: freebsd-gnats-submit@FreeBSD.org Cc: Subject: Re: ports/74661: New port: chinese/scim-chewing Date: Sat, 4 Dec 2004 15:54:09 +0800 (CST) # This is a shell archive. Save it in a file, remove anything before # this line, and then unpack it by entering "sh file". Note, it may # create directories; files and directories will be owned by you and # have default permissions. # # This archive contains: # # scim-chewing/ # scim-chewing/Makefile # scim-chewing/distinfo # scim-chewing/files # scim-chewing/pkg-descr # scim-chewing/pkg-message # scim-chewing/pkg-plist # scim-chewing/files/patch-src::Makefile.in # echo c - scim-chewing/ mkdir -p scim-chewing/ > /dev/null 2>&1 echo x - scim-chewing/Makefile sed 's/^X//' >scim-chewing/Makefile << 'END-of-scim-chewing/Makefile' X# New ports collection makefile for: zh-scim-chewing X# Date created: 4 Dec 2004 X# Whom: Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw> X# X# $FreeBSD$ X# X XPORTNAME= scim-chewing XPORTVERSION= 0.0.1 XCATEGORIES= chinese XMASTER_SITES= http://jserv.sayya.org/qooing/ XDISTNAME= ${PORTNAME}-20041130 X XMAINTAINER= ports@FreeBSD.Org XCOMMENT= SCIM chewing Chinese input methods X XBUILD_DEPENDS= scim:${PORTSDIR}/textproc/scim XLIB_DEPENDS= chewing:${PORTSDIR}/chinese/libchewing XRUN_DEPENDS= ${BUILD_DEPENDS} X XUSE_BZIP2= yes XUSE_X_PREFIX= yes XUSE_GMAKE= yes XGNU_CONFIGURE= yes X X.include <bsd.port.pre.mk> X X.if ${OSVERSION} < 500035 XBROKEN= scim-make-table is not available for 4.x X.endif X Xpost-install: X @${CAT} ${PKGMESSAGE} X @${ECHO} X @${ECHO} To display this message again, type \`make post-install\' X @${ECHO} X X.include <bsd.port.post.mk> END-of-scim-chewing/Makefile echo x - scim-chewing/distinfo sed 's/^X//' >scim-chewing/distinfo << 'END-of-scim-chewing/distinfo' XMD5 (scim-chewing-20041130.tar.bz2) = 5eea8b592238dd8e5facad5f1c683e77 XSIZE (scim-chewing-20041130.tar.bz2) = 322434 END-of-scim-chewing/distinfo echo c - scim-chewing/files mkdir -p scim-chewing/files > /dev/null 2>&1 echo x - scim-chewing/pkg-descr sed 's/^X//' >scim-chewing/pkg-descr << 'END-of-scim-chewing/pkg-descr' XSCIM Chinese table based input methods: Array30, CangJie, Cantonese, Dayi, XErbi, EZ, Jyutping, Simplex, Wubi, Ziranma, ZhuYin X XSmart Common Input Method platform, in short SCIM, is a development platform to Xmake Input Method developers live easier. It has very clear architecture and Xvery simple programming interface. X XWWW: http://scim.freedesktop.org END-of-scim-chewing/pkg-descr echo x - scim-chewing/pkg-message sed 's/^X//' >scim-chewing/pkg-message << 'END-of-scim-chewing/pkg-message' X-------------------------------------------------------------------- XRemember to set environment varible XMODIFIERS: X X csh/tcsh: setenv XMODIFIERS @im=SCIM X sh/bash: export XMODIFIERS='@im=SCIM' X Xand set LANG, LC_CTYPE to one of the following values: X X Simplified Chinese: X zh_CN.UTF-8, zh_CN.GB18030, zh_CN.GBK, zh_CN.GB2312, zh_CN.eucCN X X Traditional Chinese: X zh_TW.UTF-8, zh_TW.Big5 X zh_HK.UTF-8, zh_HK.Big5-HKSCS X XTo start the SCIM input method daemon, use command: X X scim -d X X-------------------------------------------------------------------- END-of-scim-chewing/pkg-message echo x - scim-chewing/pkg-plist sed 's/^X//' >scim-chewing/pkg-plist << 'END-of-scim-chewing/pkg-plist' Xlib/scim-1.0/1.0.0/IMEngine/chewing.a Xlib/scim-1.0/1.0.0/IMEngine/chewing.la Xlib/scim-1.0/1.0.0/IMEngine/chewing.so Xlib/scim-1.0/1.0.0/SetupUI/chewing-imengine-setup.a Xlib/scim-1.0/1.0.0/SetupUI/chewing-imengine-setup.la Xlib/scim-1.0/1.0.0/SetupUI/chewing-imengine-setup.so Xshare/scim/icons/scim-chewing.png END-of-scim-chewing/pkg-plist echo x - scim-chewing/files/patch-src::Makefile.in sed 's/^X//' >scim-chewing/files/patch-src::Makefile.in << 'END-of-scim-chewing/files/patch-src::Makefile.in' X--- src/Makefile.in.orig Mon Nov 29 17:12:21 2004 X+++ src/Makefile.in Sat Dec 4 15:16:30 2004 X@@ -238,11 +238,12 @@ X -I$(top_builddir) \ X -I$(top_srcdir) \ X -I$(top_srcdir)/src \ X+ -I/usr/local/include \ X -DSCIM_ICONDIR=\"@SCIM_ICONDIR@\" \ X -DSCIM_CHEWING_ICON_FILE=\"@SCIM_ICONDIR@/scim-chewing.png\" X X noinst_HEADERS = scim_chewing_imengine.h scim_chewing_config_entry.h X-moduledir = @SCIM_MODULEDIR@/IMEngine X+moduledir = @SCIM_MODULEDIR@/1.0.0/IMEngine X module_LTLIBRARIES = chewing.la X chewing_la_SOURCES = scim_chewing_imengine.cpp X chewing_la_CFLAGS = @SCIM_CFLAGS@ @SCIM_DEBUG_FLAGS@ X@@ -256,7 +257,7 @@ X @CHEWING_LIBS@ X X @SCIM_BUILD_SETUP_TRUE@SETUP_MODULE = chewing-imengine-setup.la X-setupmoduledir = @SCIM_MODULEDIR@/SetupUI X+setupmoduledir = @SCIM_MODULEDIR@/1.0.0/SetupUI X setupmodule_LTLIBRARIES = $(SETUP_MODULE) X chewing_imengine_setup_la_SOURCES = scim_chewing_imengine_setup.cpp X chewing_imengine_setup_la_CFLAGS = \ END-of-scim-chewing/files/patch-src::Makefile.in exit
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412040800.iB480wmW079656>