From owner-freebsd-mobile Thu Oct 23 18:17:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA11027 for mobile-outgoing; Thu, 23 Oct 1997 18:17:46 -0700 (PDT) (envelope-from owner-freebsd-mobile) Received: from ns.mt.sri.com (SRI-56K-FR.mt.net [206.127.65.42]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA11022 for ; Thu, 23 Oct 1997 18:17:43 -0700 (PDT) (envelope-from nate@rocky.mt.sri.com) Received: from rocky.mt.sri.com (rocky.mt.sri.com [206.127.76.100]) by ns.mt.sri.com (8.8.7/8.8.7) with ESMTP id TAA13811; Thu, 23 Oct 1997 19:17:35 -0600 (MDT) Received: (from nate@localhost) by rocky.mt.sri.com (8.7.5/8.7.3) id TAA18288; Thu, 23 Oct 1997 19:17:34 -0600 (MDT) Date: Thu, 23 Oct 1997 19:17:34 -0600 (MDT) Message-Id: <199710240117.TAA18288@rocky.mt.sri.com> From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Kenneth Ingham Cc: Nate Williams , mobile@freebsd.org Subject: Re: 2.2.5-RELEASE and PC Cards In-Reply-To: <19971023184906.08326@i-pi.com> References: <19971023142754.64160@fatman.i-pi.com> <199710232231.QAA17227@rocky.mt.sri.com> <19971023184906.08326@i-pi.com> X-Mailer: VM 6.29 under 19.15 XEmacs Lucid Sender: owner-freebsd-mobile@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > Thanks to Nate's suggested changed to /etc/pccard.conf, things are better. > The ethernet card is recognized when I plug it in, and ifconfig shows it > properly configured. > However, now the power light on the connector is not on. This is for the ethernet card, right? That means the 10Base2 connector is selected. Change the link flags in /etc/pccard.conf. > # 3Com Etherlink III 3C589B, 3C589C > card "3Com Corporation" "3C589" > config 0x1 "ep0" 11 > insert echo 3Com Etherlink III inserted > insert /etc/pccard_ether ep0 -link0 link1 > # insert /etc/pccard_ether ep0 link0 -link1 Switch the comment character on the above two lines. Nate