Date: Mon, 18 Nov 1996 11:31:32 -0800 From: Wayne Scott <wscott@ichips.intel.com> To: Steve Passe <smp@csn.net> Cc: smp@FreeBSD.org, Erich Boleyn <erich@uruk.org> Subject: Re: Can test again... Message-ID: <199611181931.LAA29817@pdxlx008.intel.com> In-Reply-To: Your message of "Sun, 17 Nov 1996 15:39:19 MST." <199611172239.PAA06234@clem.systemsix.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> I would really appreciate it if everyone would re-grab mptable.c and return > the results to me (don't forget args "-verbose -dmesg"). > (Russell Vincent, please ignore this request, I already have yours) > Note that I have started a page for collecting these results: > > http://www.freebsd.org/~fsmp/SMP/mptable/mptable.html Here is the output from my box: HP Vectra XU (2 - P6-200/512K) This is a pre-release version (note the error at the top of the report...) type read: Bad file descriptor =============================================================================== MPTable, version 2.0.2 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009f800 searching CMOS 'top of mem' @ 0x0009f400 (637K) searching default 'top of mem' @ 0x0009fc00 (638K) searching BIOS @ 0x000f0000 MP Table found in BIOS @ physical addr: 0x000f9550 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f9550 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x9f mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f9560 signature: 'PCMP' base table length: 236 version: 1.1 checksum: 0xf0 OEM ID: 'HP ' Product ID: 'XX ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 21 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x11 BSP, usable 6 1 0 0xfbff 0 0x11 AP, usable 6 1 0 0xfbff -- Bus: Bus ID Type 0 ISA 1 PCI -- I/O APICs: APIC ID Version State Address 16 0x11 usable 0xfec00000 -------------------- That is the end... Here is the dmesg output manually inserted. FreeBSD 2.2-961004-SNAP #0: Fri Nov 15 19:43:07 PST 1996 root@pdxlx009.intel.com:/usr/smp_sys/compile/PDXLX009 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011 cpu1 (AP): apic id: 0, version: 0x00040011 APIC I/O turned OFF by default, see: http://www.freebsd.org/~fsmp/SMP/apicio.html hit <return> to continue...Calibrating clock(s) relative to mc146818A clock... i8254 clock: 1193183 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV> real memory = 67108864 (65536K bytes) avail memory = 62914560 (61440K bytes) Probing for devices on PCI bus 0: chip0 <Intel 82378IB PCI-ISA bridge> rev 136 on pci0:0 pci0:1: CMD, device=0x0646, class=storage (ide) int a irq 14 [no driver assigned] ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:2 ahc0: Using left over BIOS settings ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "SEAGATE ST32550N 8302" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2033MB (4165272 512 byte sectors) (ahc0:5:0): "SONY CD-ROM CDU-76S 1.1a" type 5 removable SCSI 2 cd0(ahc0:5:0): CD-ROM cd0(ahc0:5:0): UNIT ATTENTION asc:28,0 cd0(ahc0:5:0): Not ready to ready transition, medium may have changed cd present [400000 x 2048 byte records] vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci0:11 fxp0 <Intel EtherExpress Pro/100B Fast Ethernet> rev 1 int a irq 11 on pci0:14 fxp0: Ethernet address 00:a0:c9:22:7d:cc chip1 <Intel 82450KX (Orion) PCI memory controller> rev 2 on pci0:25 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 not found at 0xffffffff lpt1 not found at 0xffffffff mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a WARNING: / was not properly dismounted. =========> SECOND CPU LAUNCHED!! <========= cpunumber=1 mp_lock=1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611181931.LAA29817>