Date: Thu, 10 Aug 2000 11:02:04 +0300 From: Odhiambo Washington <vedette@iconnect.co.ke> To: freebsd-questions@FreeBSD.ORG Subject: CS423X Sound Card Message-ID: <20000810110204.A97801@siafu.iconnect.co.ke> In-Reply-To: <20000810003822.D5405@149.211.6.64.reflexcom.com>; from Crist J . Clark on Thu, Aug 10, 2000 at 12:38:22AM -0700 References: <Pine.BSF.4.21.0008092259060.51988-100000@finland.ispro.net.tr> <20000810003822.D5405@149.211.6.64.reflexcom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I am requesting for help with setting up my
1. cs423x sound card
2. Hewlett Packard DJ 895C printer
I am running FreeBSD 4.1-RELEASE.
It is not that I am daft. I have read most of the HOWTOs, esp on the
printer but I haven't succeeded. I hope that qualifies me as a member of
this list to seek help from my fellows ;-)
I'll give the sound card a priority though. Please DO NOT refer me again
to the HOWTOs - I swear I haven't been able to sort myself out.
The following is the dmesg from my wks which I believe indicates that it
this device is being detected. I need kernel- and /dev -specific
entries that will enable my access it.
Thanking you guys,
Wash
##########BOF
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Tue Aug 1 14:07:33 EAT 2000
admin@alouette.iconnect.co.ke:/usr/src/sys/compile/ALOUETTE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 167772160 (163840K bytes)
avail memory = 159350784 (155616K bytes)
Preloaded elf kernel "kernel" at 0xc0392000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 10
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xeb001000-0xeb00107f irq 5 at device 10.0 on pci0
xl0: Ethernet address: 00:50:04:4d:b5:59
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem 0xeb000000-0xeb000fff irq 9 at device 11.0 on pci0
ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 895C> MLC,PCL,PML
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
adv1: Invalid baseport of 0x534 specified. Nearest valid baseport is 0x330. Failing probe.
unknown0: <WSS/SB> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 11 drq 1,0 on isa0
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Failing probe.
unknown1: <GAME> at port 0x200-0x207 on isa0
unknown2: <CTRL> at port 0x120 on isa0
unknown3: <MPU> at port 0x330 on isa0
ad0: 4110MB <QUANTUM FIREBALL CR4.3A> [14848/9/63] at ata0-master using UDMA33
ad1: 8063MB <SAMSUNG SV0842D> [16383/16/63] at ata0-slave using UDMA33
acd0: CDROM <CD-ROM Philips PCA402CDA> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/wd0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0022> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
Warning: number of clusters (64001) exceeds FAT capacity (64000)
###########EOF
--
Odhiambo Washington
Systems Administrator
Inter-Connect Ltd.
3rd Flr The Chancery
Valley Rd
PO Box 39519 Nairobi
Tel: 254 2 711140
Fax: 254 2 718418
One of the most obvious facts about grownups to a child is that they have
forgotten what it is like to be a child. -Randall Jarrell
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000810110204.A97801>