Date: Tue, 19 Jun 2007 19:01:02 +0200 From: didier derny <didier@aida.org> To: Soeren Straarup <xride@x12.dk> Cc: freebsd-hackers@freebsd.org Subject: Re: need help / advices with freebsd + asrock 4coredual-vsta (VT8237A) Message-ID: <D4ECC689-81E3-49BD-9365-BBB5F0463568@aida.org> In-Reply-To: <20070619133325.GS57615@x12.dk> References: <26C97624-D6E1-4E46-AE79-A2F00921D0DF@aida.org> <20070619133325.GS57615@x12.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 19 juin 07, at 15:33, Soeren Straarup wrote:
> On Mon, Jun 18, 2007 at 01:14:54PM +0200, didier derny wrote:
>> I recently bought an asrock 4coredual-vsta mother board
>> when I tried to install freebsd I saw with horror that freebsd6,2-
>> stable
>> and freebsd7.0-current where coughing when they tried to access the
>> IDE or SATA
>> hard disks /cdrom.
>>
>> it just get stuck after having accessed the hard disk or cdrom
>>
>
> A great help would to have an output of 'boot -v' also known as a
> verbose boot.
>
content of /var/run/dmesg.boot from a system installed on a usb key
(no hard disk visible)
sorry, this is rather lengthy
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE-200706 #0: Sun Jun 3 11:39:06 UTC 2007
root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a9e000.
Calibrating clock(s) ... i8254 clock: 1193236 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1793736679 Hz
CPU: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz (1793.74-MHz K8-
class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147155968 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b9b000 - 0x000000007c361fff, 2071752704 bytes (505799 pages)
avail memory = 2061488128 (1965 MB)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <A M I OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jun 3 2007 11:37:21)
acpi0: <A M I OEMRSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008f64
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03081106)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.HPRG -> bus 0 dev 17 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 17 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX2 -> bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0308, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x2210, cachelnsz=8 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x1106, dev=0x1308, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2308, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3208, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4308, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x5308, revid=0x00
bus=0, slot=0, func=5
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7308, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb198, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xa208, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 27
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=0, slot=9, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base ff6ff000, size 11, enabled
map[14]: type 4, range 32, base 0000d400, size 7, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
found-> vendor=0x1106, dev=0x0591, revid=0x80
bus=0, slot=15, func=0
class=01-01-8f, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 3, enabled
map[14]: type 4, range 32, base 0000dc00, size 2, enabled
map[18]: type 4, range 32, base 0000d880, size 3, enabled
map[1c]: type 4, range 32, base 0000d800, size 2, enabled
map[20]: type 4, range 32, base 0000d480, size 4, enabled
map[24]: type 4, range 32, base 0000d000, size 8, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0xa0
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e080, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x3038, revid=0xa0
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3038, revid=0xa0
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e480, size 5, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0xa0
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3104, revid=0x86
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ff6ff800, size 8, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3337, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3065, revid=0x7c
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base ff6ffc00, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x337b, revid=0x00
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0xff300000-0xff3fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1
- AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xcfff
pcib2: memory decode 0xff400000-0xff4fffff
pcib2: prefetched decode 0xbff00000-0xdfefffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1002, dev=0x7280, revid=0x00
bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 64, base c0000000, size 28, enabled
pcib2: requested memory range 0xc0000000-0xcfffffff: good
map[18]: type 1, range 64, base ff4f0000, size 16, enabled
pcib2: requested memory range 0xff4f0000-0xff4fffff: good
map[20]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: requested I/O range 0xc000-0xc0ff: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 24
found-> vendor=0x1002, dev=0x72a0, revid=0x00
bus=2, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 64, base ff4e0000, size 16, enabled
pcib2: requested memory range 0xff4e0000-0xff4effff: good
pci2: <display, VGA> at device 0.0 (no driver attached)
pci2: <display> at device 0.1 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xd400-0xd47f mem
0xff6ff000-0xff6ff7ff irq 17 at device 9.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff6ff000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:06:00:00:00:4e:10
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:00:4e:10
fwe0: bpf attached
fwe0: Ethernet address: 02:11:06:00:4e:10
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 8237A SATA150 controller> port
0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd887,0xd800-0xd803,0xd480-0xd48f,
0xd000-0xd0ff irq 21 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd480
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
atapci0: [MPSAFE]
atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xd000
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xdc00
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd880
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd800
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci1: <VIA 8237A UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at
device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe080
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 22 at
device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe480-0xe49f irq 21 at
device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe480
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 23 at
device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xff6ff800-0xff6ff8ff irq
21 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xff6ff800
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/6.0b, addr 2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
uhub6: Mitsumi Electric Hub in Apple Extended USB Keyboard, class
9/0, rev 1.10/4.20, addr 3
uhub6: 3 ports with 2 removable, bus powered
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.20,
addr 5, iclass 3/1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.20,
addr 5, iclass 3/1
uscanner0: Canon CanoScan, rev 1.10/1.00, addr 6
umass0: Verbatim Store'n'go U3, rev 2.00/2.00, addr 7
umass0:1:0:-1: Attached to scbus1
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
0xff6ffc00-0xff6ffcff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:19:66:22:cb:4f
vr0: [MPSAFE]
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib3
pci128: physical bus=128
found-> vendor=0x1106, dev=0x3288, revid=0x10
bus=128, slot=1, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base ff5fc000, size 14, enabled
pcib3: matched entry for 128.1.INTA
pcib3: slot 1 INTA hardwired to IRQ 17
pci128: <multimedia> at device 1.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
irq 0,8 on acpi0
acpi_hpet0: vend: 0x1106 rev: 0x1 num: 1 hz: 14318180 opts: leg_route
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
isa_probe_children: probing PnP devices
umass1: Generic Mass Storage Device, rev 2.00/1.26, addr 2
umass1:2:1:-1: Attached to scbus2
Device configuration finished.
Reducing kern.maxvnodes 132652 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 128123651 hz
Timecounter "TSC" frequency 1793736679 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8237A chip
acd0: setting UDMA33 on 8237A chip
acd0: <TSSTcorpCD/DVDW SH-S162L/TS04> DVDR drive at ata1 as master
acd0: read 8115KB/s (8115KB/s) write 2705KB/s (2705KB/s), 2048KB
buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Verbatim Store'n'go U3 6.51> Removable Direct Access SCSI-0
device
pass0: Serial Number u
pass0: 40.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Verbatim Store'n'go U3 6.51> Removable CD-ROM SCSI-0 device
pass1: Serial Number u
pass1: 40.000MB/s transfers
pass2 at umass-sim1 bus 1 target 0 lun 0
pass2: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0
device
pass2: 1.000MB/s transfers
pass3 at umass-sim1 bus 1 target 0 lun 1
pass3: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0
device
pass3: 1.000MB/s transfers
pass4 at umass-sim1 bus 1 target 0 lun 2
pass4: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0
device
pass4: 1.000MB/s transfers
pass5 at umass-sim1 bus 1 target 0 lun 3
pass5: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0
device
pass5: 1.000MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk dda0 at umass-sim0 bus 0 target 0 lun 0
da0: <Verbatim Store'n'go U3 6.51> Removable Direct Access SCSI-0 device
da0: Serial Number u
da0: 40.000MB/s transfers
da0: 949MB (1944383 512 byte sectors: 64H 32S/T 949C)
a4
GEOM: new disk cd0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
(cd0:umass-sim0:0:0:1): error 6
(cd0:umass-sim0:0:0:1): Unretryable Error
cd0 at umass-sim0 bus 0 target 0 lun 1
cd0: <Verbatim Store'n'go U3 6.51> Removable CD-ROM SCSI-0 device
cd0: Serial Number u
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim1:1:0:0): error 6
(da1:umass-sim1:1:0:0): Unretryable Error
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim1:1:0:1): error 6
(da2:umass-sim1:1:0:1): Unretryable Error
da2 at umass-sim1 bus 1 target 0 lun 1
da2: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim1:1:0:2): error 6
(da3:umass-sim1:1:0:2): Unretryable Error
da3 at umass-sim1 bus 1 target 0 lun 2
da3: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da4:umass-sim1:1:0:3): error 6
(da4:umass-sim1:1:0:3): Unretryable Error
da4 at umass-sim1 bus 1 target 0 lun 3
da4: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da4: 1.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim1:1:0:0): error 6
(da1:umass-sim1:1:0:0): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim1:1:0:0): error 6
(da1:umass-sim1:1:0:0): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim1:1:0:0): error 6
(da1:umass-sim1:1:0:0): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim1:1:0:1): error 6
(da2:umass-sim1:1:0:1): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim1:1:0:1): error 6
(da2:umass-sim1:1:0:1): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim1:1:0:1): error 6
(da2:umass-sim1:1:0:1): Unretryable Error
Opened disk da2 -> 6
(da3:umass-sim1:1:0:2): error 6
(da3:umass-sim1:1:0:2): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim1:1:0:2): error 6
(da3:umass-sim1:1:0:2): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim1:1:0:2): error 6
(da3:umass-sim1:1:0:2): Unretryable Error
Opened disk da3 -> 6
(da4:umass-sim1:1:0:3): error 6
(da4:umass-sim1:1:0:3): Unretryable Error
Opened disk da4 -> 6
(da4:umass-sim1:1:0:3): error 6
(da4:umass-sim1:1:0:3): Unretryable Error
Opened disk da4 -> 6
(da4:umass-sim1:1:0:3): error 6
(da4:umass-sim1:1:0:3): Unretryable Error
Opened disk da4 -> 6
(cd0:umass-sim0:0:0:1): Retrying Command
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
>> I there any hope to see FreeBSD working on this mother board ?
>>
>> is there anything I can do to help to solve the problem ?
>>
>> do I have to change my mother board for something else ?
>> I choosed this one simply because it had a pci express AND an AGP
>> slot
>>
>> in that case to you have any advice for the video board if I want
>> to buy
>> somethething working with X11 ?
>>
>> thanks for your help
>>
>> --
>> didier@aida. org
>>
>
> /Soeren
>
> --
> Soeren Straarup | aka OZ2DAK aka Xride
> FreeBSD committer | FreeBSD since 2.2.6-R
> If a program is not working right, then send a patch
> _______________________________________________
> freebsd-hackers@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-
> unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D4ECC689-81E3-49BD-9365-BBB5F0463568>