Date: Mon, 14 Mar 2005 21:24:10 +0800 From: John Mok <jmok@attglobal.net> To: "Maren S. Leizaola" <maren@leizaola.com> Cc: freebsd-net@freebsd.org Subject: Re: HOWTO connect MCI using Netgraph + Frame Relay with Digi SYNC/570i Message-ID: <4235907A.2010907@attglobal.net> In-Reply-To: <Pine.NEB.4.61.0503141834320.28529@hades.leizaola.com> References: <42344AF7.6070701@attglobal.net> <Pine.NEB.4.61.0503141834320.28529@hades.leizaola.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear Maren, I did not notice anything special in the Cisco 1600 router config. as shown below :- ! hostname example.com no service udp-small-servers no service tcp-small-servers ! ip sub-net-zero ip classless ip routing ! enable-password ***** ! interface FastEthernet 0 description To Intranet ip address 1.2.3.4 255.255.255.224 no ip directed broadcast no shutdown ! interface Serial 0 description To MCI bandwidth 1536 encapsulation frame-relay IETF frame-relay lmi-type ansi no ip address no shutdown no fair-queue ! interface Serial 0.1 point-to-point ip unnumbered FastEthernet0 frame-relay interface-dlci 500 IETF bandwidth 1536 no shutdown ! ip route 0.0.0.0 0.0.0.0 Serial 0.1 ! ip domain-name ALTER.NET ip name-server 198.6.1.5 snmp-server community .... .... How to put the same serial config. on ARNET/Digi SYNC/570i with Netgraph + Frame Relay? If it would be easier to work with Sangoma S5141, then how to convert into the Sangoma config. with Netgraph? Thanks a lot. John Mok Maren S. Leizaola wrote: > On Sun, 13 Mar 2005, John Mok wrote: > >> Hi, >> >> I would like to replace the existing Cisco router 1600 and connect to >> MCI Hong Kong with FeeBSD 5.3 box with a Digi SYNC 570 serial card. >> With reference of the FreeBSD handbook and the information from >> Julian Elischer at >> >> http://www.elischer.org/netgraph/ > > > John, > Are you sure that you have moved all the items you need from the > cisco config to FreeBSD... I've not played with netgraph, but if I > recall correctly your configuration needs to also match what PCCW have > configured, in particular the sub-interface... s0.100 etc... > > regards, > maren. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4235907A.2010907>