Date: Mon, 31 Dec 2007 14:44:10 +0100 From: "H. Glocar" <fam.glocar@arcor.de> To: <freebsd-acpi@FreeBSD.org> Subject: re0: watchdog timeout, ACPI Message-ID: <ILEELCLGFAJGKJNFJKHMKEELCAAA.fam.glocar@arcor.de>
next in thread | raw e-mail | index | archive | help
Hallo,
habe wohl ein Problem mit ACPI.
Auf meinem 2. Rechner habe ich freeNAS (File-Server) installiert, basiert
auf freeBSD.
Der Rechner wird mit WOL gestartet und soll mit "shutdown" wieder
ausgeschaltet werden.
Würde mit ACPI funktionieren, bekomme aber einen re0: watchdog timeout
Fehler - somit keine Netzwerkverbindung!
Ohne ACPI (Option 2 Startmenue) bekomme ich die Netzwerkverbindung, aber
"shutdown" schält den Rechner nicht aus, fährt nur das System runter!
Mainboard FIC PAG2130 (www.fic.com.tw)
BIOS-Version SA412
Logfile (ACPI ausgeschalten):
Dec 31 13:05:54 kernel: rgephy0: <RTL8169S/8110S media interface> on
miibus0
Dec 31 13:05:54 kernel: rgephy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Dec 31 13:05:54 kernel: re0: Ethernet address: 00:1c:f0:62:f5:8b
Dec 31 13:05:54 kernel: re0: [FAST]
Dec 31 13:05:54 kernel: isab0: <PCI-ISA bridge> at device 20.0 on pci0
Dec 31 13:05:54 kernel: isa0: <ISA bus> on isab0
Dec 31 13:05:54 kernel: atapci0: <VIA 82C686A UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe400-0xe40f at device 20.1 on pci0
Dec 31 13:05:54 kernel: ata0: <ATA channel 0> on atapci0
Dec 31 13:05:54 kernel: ata1: <ATA channel 1> on atapci0
Dec 31 13:05:54 kernel: viapropm0: SMBus I/O base at 0x5000
Dec 31 13:05:54 kernel: viapropm0: SMBus I/O base at 0x5000
Dec 31 13:05:54 kernel: viapropm0: SMBus revision code 0x0
Dec 31 13:05:54 kernel: smbus0: <System Management Bus> on viapropm0
Dec 31 13:05:54 kernel: smb0: <SMBus generic I/O> on smbus0
Dec 31 13:05:54 kernel: pmtimer0 on isa0
Dec 31 13:05:54 kernel: orm0: <ISA Option ROM> at iomem
0xc0000-0xcbfff on isa0
Dec 31 13:05:54 kernel: atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
Dec 31 13:05:54 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Dec 31 13:05:54 kernel: kbd0 at atkbd0
Dec 31 13:05:54 kernel: atkbd0: [GIANT-LOCKED]
Dec 31 13:05:54 kernel: fdc0: <Enhanced floppy controller> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Dec 31 13:05:54 kernel: fdc0: [FAST]
Dec 31 13:05:54 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Dec 31 13:05:54 kernel: ppc0: parallel port not found.
Dec 31 13:05:54 kernel: sc0: <System console> at flags 0x100 on isa0
Dec 31 13:05:54 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Dec 31 13:05:54 kernel: sio0: configured irq 4 not in bitmap of probed
irqs 0
Dec 31 13:05:54 kernel: sio0: port may not be enabled
Dec 31 13:05:54 kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on
isa0
Dec 31 13:05:54 kernel: sio0: type 8250 or not responding
Dec 31 13:05:54 kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Dec 31 13:05:54 kernel: sio1: port may not be enabled
Dec 31 13:05:54 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
Dec 31 13:05:54 kernel: unknown: <PNP0303> can't assign resources
(port)
Dec 31 13:05:54 kernel: speaker0: <PC speaker> at port 0x61 on isa0
Dec 31 13:05:54 kernel: unknown: <PNP0c01> can't assign resources
(memory)
Dec 31 13:05:54 kernel: unknown: <PNP0a03> can't assign resources
(port)
Dec 31 13:05:54 kernel: unknown: <PNP0700> can't assign resources
(port)
Dec 31 13:05:54 kernel: Timecounter "TSC" frequency 501141073 Hz
quality 800
Dec 31 13:05:54 kernel: Timecounters tick every 10.000 msec
Dec 31 13:05:54 kernel: ad0: DMA limited to UDMA33, device found
non-ATA66 cable
Dec 31 13:05:54 kernel: ad0: 6150MB <Seagate ST36421A 6.01> at
ata0-master UDMA33
Dec 31 13:05:54 kernel: acd0: CDROM <MIDA 40XB/FA16> at ata0-slave
PIO4
Dec 31 13:05:54 kernel: ad2: 38166MB <WDC WD400EB-11CPF0 06.04G06> at
ata1-master UDMA66
Dec 31 13:05:54 kernel: GEOM_LABEL: Label for provider ad0s2 is
ufs/Data.
Dec 31 13:05:54 kernel: Trying to mount root from ufs:/dev/ad0s1a
Dec 31 13:05:56 lighttpd[833]: (log.c.75) server started
Dec 31 13:05:57 login: login on ttyv0 as root
Dec 31 13:07:32 lighttpd[833]: (mod_cgi.c.1231) cgi died ?
Dec 31 13:07:56 lighttpd[833]: (mod_cgi.c.1231) cgi died ?
Für Hilfe wäre ich dankbar
_______________________________
Helmut Glocar
Weinbergstr. 1
72127 Kusterdingen
eMail: helmut.glocar@arcor.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ILEELCLGFAJGKJNFJKHMKEELCAAA.fam.glocar>