Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 Sep 2007 14:31:40 GMT
From:      Brendhan Horne <list@understudy.net>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   ports/116765: gtk20 not compiling
Message-ID:  <200709301431.l8UEVewa041260@www.freebsd.org>
Resent-Message-ID: <200709301440.l8UEe1EP079994@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         116765
>Category:       ports
>Synopsis:       gtk20 not compiling
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-ports-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Sep 30 14:40:00 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator:     Brendhan Horne
>Release:        6.2
>Organization:
>Environment:
FreeBSD Gargoyle.brendhanhorne.com 6.2-STABLE FreeBSD 6.2-STABLE #7: Tue Aug 14 10:37:09 EDT 2007     root@Gargoyle.brendhanhorne.com:/usr/obj/usr/src/sys/BLACKHOLE  i386
>Description:
gtk20 fails to compile when being made through either portupgrade or a make install clean directly on the port.

gtkcupsutils.c: In function `_post_send':
gtkcupsutils.c:620: warning: long unsigned int format, different type arg (arg 3)
gtkcupsutils.c:631: error: dereferencing pointer to incomplete type
gtkcupsutils.c: In function `_get_send':
gtkcupsutils.c:970: error: dereferencing pointer to incomplete type
gmake[4]: *** [gtkcupsutils.lo] Error 1
gmake[4]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.14/modules/printbackends/cups'
gmake[3]: *** [all-recursive] Error 1
gmake[3]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.14/modules/printbackends'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.14/modules'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/x11-toolkits/gtk20/work/gtk+-2.10.14'
gmake: *** [all] Error 2
*** Error code 2


make clean efforts result no change
removing gtk+-2.10.14.tar.bz2 and make fetch new file result no change

Gargoyle# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #7: Tue Aug 14 10:37:09 EDT 2007
    root@Gargoyle.brendhanhorne.com:/usr/obj/usr/src/sys/BLACKHOLE
WARNING: debug.mpsafenet forced to 0 as aio requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1609957376 (1535 MB)
avail memory = 1568481280 (1495 MB)
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=781744kB.
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IBM TP-1R> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon LW RV200 Mobility 7500 M7> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.25.0 20060524
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2
em0: Ethernet address: 00:11:25:2e:d7:ff
em0: [GIANT-LOCKED]
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xc0214000-0xc0214fff irq 11 at device 2.0 on pci2
iwi0: Ethernet address: 00:0e:35:75:38:77
iwi0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 8250 or not responding
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1698567592 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <WDC WD1200UE-00KVT0 01.03K01> at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a

>How-To-Repeat:
portupgrade gtk20
or
cd /usr/ports/x11-toolkits/gtk20 && make clean && make install clean && rehash
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200709301431.l8UEVewa041260>