Date: Fri, 4 Nov 2011 20:28:23 GMT From: Rene Ladan <rene@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 201181 for review Message-ID: <201111042028.pA4KSNIb039342@skunkworks.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://p4web.freebsd.org/@@201181?ac=10 Change 201181 by rene@rene_acer on 2011/11/04 20:28:23 IFC Affected files ... .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/pr-guidelines/article.sgml#9 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/x11/chapter.sgml#21 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/porters-handbook/book.sgml#114 integrate .. //depot/projects/docproj_nl/www/share/sgml/usergroups.xml#28 integrate Differences ... ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/pr-guidelines/article.sgml#9 (text+ko) ==== @@ -15,7 +15,7 @@ <articleinfo> <title>Problem Report Handling Guidelines</title> - <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/pr-guidelines/article.sgml,v 1.38 2011/09/01 16:35:16 ryusuke Exp $</pubdate> + <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/pr-guidelines/article.sgml,v 1.39 2011/11/03 20:56:02 manolis Exp $</pubdate> <legalnotice id="trademarks" role="trademarks"> &tm-attrib.freebsd; @@ -1042,6 +1042,10 @@ </listitem> <listitem> + <para>Set Responsible to <literal>gnats-admin</literal>.</para> + </listitem> + + <listitem> <para>Set State to <literal>closed</literal>.</para> </listitem> </itemizedlist> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/x11/chapter.sgml#21 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/x11/chapter.sgml,v 1.207 2011/02/15 06:14:42 keramida Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/x11/chapter.sgml,v 1.208 2011/10/30 17:29:14 manolis Exp $ --> <chapter id="x11"> @@ -397,14 +397,8 @@ <sect2> <title>Configuring X11</title> - <para>As of version 7.3, <application>&xorg;</application> can - often work without any configuration file by simply typing at - prompt:</para> - - <screen>&prompt.user; <userinput>startx</userinput></screen> - - <para>Starting with version 7.4, <application>&xorg;</application> - can use <acronym>HAL</acronym> to autodetect keyboards and mice. + <para><application>&xorg;</application> + uses <acronym>HAL</acronym> to autodetect keyboards and mice. The <filename role="package">sysutils/hal</filename> and <filename role="package">devel/dbus</filename> ports are installed as dependencies of <filename role="package">x11/xorg</filename>, but @@ -416,7 +410,13 @@ <para>These services should be started (either manually or by rebooting) before further <application>&xorg;</application> - configuration is attempted.</para> + configuration or use is attempted.</para> + + <para><application>&xorg;</application> can + often work without any further configuration steps by simply typing at + prompt:</para> + + <screen>&prompt.user; <userinput>startx</userinput></screen> <para>The automatic configuration may fail to work with some hardware, or may not set things up quite as desired. In these cases, manual @@ -456,15 +456,7 @@ <para>The next step is to test the existing configuration to verify that <application>&xorg;</application> can work with the graphics - hardware on the target system. In <application>&xorg;</application> - versions up to 7.3, type:</para> - - <screen>&prompt.root; <userinput>Xorg -config xorg.conf.new</userinput></screen> - - <para>Starting with <application>&xorg;</application> 7.4 and above, - this test produces a black screen which may make it difficult - to diagnose whether X11 is working properly. The older behavior - is still available by using the <option>retro</option> option:</para> + hardware on the target system. Type:</para> <screen>&prompt.root; <userinput>Xorg -config xorg.conf.new -retro</userinput></screen> @@ -483,15 +475,14 @@ </keycombo>.</para> <note> - <para>In <application>&xorg;</application> versions up to 7.3, - the + <para>The <keycombo action="simul"> <keycap>Ctrl</keycap> <keycap>Alt</keycap> <keycap>Backspace</keycap> - </keycombo> key combination could be used to break out of - <application>&xorg;</application>. To enable it in - version 7.4 and later, you can either type the following + </keycombo> key combination may also be used to break out of + <application>&xorg;</application>. To enable it, + you can either type the following command from any X terminal emulator:</para> <screen>&prompt.user; <userinput>setxkbmap -option terminate:ctrl_alt_bksp</userinput></screen> @@ -526,8 +517,9 @@ <para>If the mouse does not work, you will need to first configure it before proceeding. See <xref linkend="mouse"> - in the &os; install chapter. Additionally, starting with version - 7.4, the <literal>InputDevice</literal> sections in + in the &os; install chapter. In recent + <application>Xorg</application> versions, + the <literal>InputDevice</literal> sections in <filename>xorg.conf</filename> are ignored in favor of the autodetected devices. To restore the old behavior, add the following line to the <literal>ServerLayout</literal> or @@ -540,8 +532,8 @@ switching).</para> <note> - <para>As previously explained since version 7.4, by default, - the <application>hald</application> daemon will + <para>As previously explained + the <application>hald</application> daemon will, by default, automatically detect your keyboard. There are chances that your keyboard layout or model will not be correct, desktop environments like <application>GNOME</application>, ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/porters-handbook/book.sgml#114 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/porters-handbook/book.sgml,v 1.1118 2011/10/13 14:50:03 brueffer Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/porters-handbook/book.sgml,v 1.1119 2011/11/04 14:28:43 pav Exp $ --> <!DOCTYPE BOOK PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [ @@ -3811,7 +3811,7 @@ it unless the default is not suitable for your port.</para> <para>If your port anchors its man tree somewhere other than - <makevar>MANPREFIX</makevar>, you can use the + <makevar>PREFIX</makevar>, you can use the <makevar>MANPREFIX</makevar> to set it. Also, if only manpages in certain sections go in a non-standard place, such as some <literal>perl</literal> modules ports, you can set individual man paths using ==== //depot/projects/docproj_nl/www/share/sgml/usergroups.xml#28 (text+ko) ==== @@ -5,7 +5,7 @@ <usergroups> <cvs:keywords xmlns:cvs="http://www.FreeBSD.org/XML/CVS" version="1.0"> <cvs:keyword name="freebsd"> - $FreeBSD: www/share/sgml/usergroups.xml,v 1.110 2011/08/17 15:05:49 jkois Exp $ + $FreeBSD: www/share/sgml/usergroups.xml,v 1.112 2011/10/30 15:03:05 gjb Exp $ </cvs:keyword> </cvs:keywords> @@ -263,12 +263,12 @@ <country code="ES" name="Spain"> <entry id="freebsdspain"> <name>FreeBSD Spain</name> - <url>https://sites.google.com/site/freebsdspain/</url>; + <url>http://freebsdspain.blogspot.com/</url>; <description>FreeBSD Spain is a new FreeBSD user group for Spanish FreeBSD users, where they can share knowledge, ideas, opinions and seek help. For more information please visit our <a - href="https://sites.google.com/site/freebsdspain/">website</a>; + href="http://freebsdspain.blogspot.com/">website</a>; or send an <a href="mailto:gobledb@gmail.com">email</a>. </description> </entry>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201111042028.pA4KSNIb039342>