Date: Wed, 11 Oct 2017 20:48:54 +0100 From: Chris Sparkes <chris@sparkessoftware.com> To: Jan Beich <jbeich@FreeBSD.org> Cc: ports@freebsd.org Subject: Re: Wacom tablet Message-ID: <9f7fb669-e2be-2a21-5a5e-9d2f6ec1ae19@sparkessoftware.com> In-Reply-To: <8tgh-h8id-wny@FreeBSD.org> References: <c9892d5d-f3e2-8056-398f-3e7b5484488f@sparkessoftware.com> <8tgh-h8id-wny@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I have added a section to xorg.conf for the stylus. It now shows up in xsetwacom and works, but it's very intermittent. When I use the stylus, it can take over 20 tries before the mouse cursor will actually move. When it does, it keeps working until I take the stylus away from the tablet, then usually won't work again for a while. It feels like the time it takes to start working again gets longer each time. I tried using cat on /dev/input/event0 and can see that I don't always get characters output when I use the stylus. I have found out that if Xorg is connected, or cat is running, I do not get the disconnects occurring. Maybe that issue is only caused by not having an open connection to the device. I have added the usb quirk, and it did get rid of the uhid messages. I only get the messages about ugen0.5 now (which I expect). Thanks for your help. On 11/10/2017 18:58, Jan Beich wrote: > Chris Sparkes <chris@sparkessoftware.com> writes: > >> 1. Xorg is not being configured when the device is plugged >> in. (xsetwacom does not show any devices). > > devd(8) hotplugging is currently partially broken. See bug 196678. > Either apply one of the attached patches, use HAL or configure manually. > >> Xorg log shows 'config/devd: ignoring device uhid1'. dmesg shows the >> messages below. These messages repeat every time I lift the pen off >> the tablet. > > Try disabling uhid(4) from attaching as it may conflict with wacom(4x). > > $ kldload usb_quirk > $ usbconfig add_dev_quirk_vplh 0x056a 0 0 0xffff UQ_MATCH_VENDOR_ONLY > $ usbconfig add_dev_quirk_vplh 0x056a 0 0 0xffff UQ_HID_IGNORE > <disconnect the device> > <connect the device> > $ dmesg | uhid > > If it helps I can add it to /usr/local/etc/rc.d/wacom >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9f7fb669-e2be-2a21-5a5e-9d2f6ec1ae19>