From owner-freebsd-current@FreeBSD.ORG Fri Aug 29 14:52:16 2003 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C496216A4BF for ; Fri, 29 Aug 2003 14:52:16 -0700 (PDT) Received: from mail.gmx.net (mail.gmx.de [213.165.64.20]) by mx1.FreeBSD.org (Postfix) with SMTP id 3959844005 for ; Fri, 29 Aug 2003 14:52:14 -0700 (PDT) (envelope-from pilkis@gmx.net) Received: (qmail 882 invoked by uid 65534); 29 Aug 2003 21:52:10 -0000 Received: from unknown (EHLO pilkisnotexp) (62.68.42.70) by mail.gmx.net (mp007) with SMTP; 29 Aug 2003 23:52:10 +0200 Message-ID: <004f01c36e77$ccb651d0$0464a8c0@spotripoli.local> From: "Putinas" To: "Andre Guibert de Bruet" References: <021001c36e66$5ee177e0$0464a8c0@spotripoli.local> <20030829162024.Y452@alpha.siliconlandmark.com> Date: Fri, 29 Aug 2003 23:52:09 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.3790.0 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0 cc: freebsd-current@freebsd.org Subject: Re: sony vaio pcg-gr390 X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 29 Aug 2003 21:52:17 -0000 I rebooted my notebook to freebsd and was thinking how to save log file if kernel doesn't boot ... and strange thing happened kernel booted up no hang. ( after I rebooted 3 times more - hanging in same place like before ). So I think I just got lucky to save dmesg without headache ... and here it is ( sorry if posting verbose dmesg on the list is bad idea :/ ) . The last lines what I saw when kernel lockups is: acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times cbb0: Unsupported card type detected Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Fri Aug 29 06:29:49 EET 2003 root@pilkisnote.spo-tripoli.local:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0752000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0752294. Calibrating clock(s) ... i8254 clock: 1193189 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1193108906 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1193.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff real memory = 536346624 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000779000 - 0x000000001f5d3fff, 518369280 bytes (126555 pages) 0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages) avail memory = 512958464 (489 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6d00 bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd870+0x13a pnpbios: Found PnP BIOS data at 0xc00f6d30 pnpbios: Entry = f0000:a456 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 2 5 A 0x69 3 embedded 2 8 A 0x68 9 embedded 0 29 A 0x60 9 embedded 0 29 B 0x63 9 embedded 0 2 A 0x60 9 embedded 0 1 A 0x60 9 AcpiOsDerivePciId: bus 1 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 5 func 0 AcpiOsDerivePciId: bus 2 dev 5 func 1 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 0 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 0 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 1050 ---- after fixup boot-disabled links -------------- \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 1050 ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x3575, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3576, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x2482, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2484, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x2487, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 found-> vendor=0x8086, dev=0x2448, revid=0x41 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base d0000000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: possible interrupts: 9 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x2485, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, enabled found-> vendor=0x8086, dev=0x2486, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 agp0: mem 0xe0000000-0xefffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 228M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xd0100000-0xd01fffff pcib1: prefetched decode 0xd8000000-0xdfffffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1050 ---- before fixup boot-disabled links ------------- \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1150 ---- after fixup boot-disabled links -------------- \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1150 ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base d0100000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 9 found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f at device 29.2 on pci0 pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: possible interrupts: 9 pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 umass0:0:0:-1: Attached to scbus0 pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x4000-0x4fff pcib2: memory decode 0xd0200000-0xd02fffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0 \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0 \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1150 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 0 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 4740 \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 3160 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 1580 ---- after fixup boot-disabled links -------------- \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 4740 \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 3160 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 1580 ---- arbitrated configuration --------------------- \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0 \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0 \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base d0205000, size 11, enabled map[14]: type 1, range 32, base d0200000, size 14, enabled found-> vendor=0x104c, dev=0x8021, revid=0x02 bus=2, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D2 D3 current D0 pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKF) pcib2: possible interrupts: 9 pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF found-> vendor=0x1180, dev=0x0476, revid=0x80 bus=2, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1180, dev=0x0476, revid=0x80 bus=2, slot=5, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0204000, size 12, enabled map[14]: type 4, range 32, base 00004000, size 6, enabled pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE) pcib2: slot 8 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x1031, revid=0x41 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 fwohci0: mem 0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xd0205000-0xd02057ff pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKC) pcib2: slot 2 INTA is routed to irq 9 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 08:00:46:03:00:d8:58:63 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: phy read failed(2). fwohci0: fwphy_rddata: 0x3 loop=0, retry=1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 if_fwe0: on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:d8:58:63 fwe0: bpf attached sbp0: on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 cbb0: irq 9 at device 5.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x06070080 0x00824000 0x10: 0xd0200000 0x020000dc 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109 0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a20001 0x00000000 0x04630463 0x30000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: at device 5.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xd0200000-0xd02fffff cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKG) pcib2: possible interrupts: 9 pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG cbb1: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x06070080 0x00824000 0x10: 0xd0201000 0x020000dc 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209 0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a20001 0x00000000 0x04630463 0x30000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fxp0: port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2 pcib2: device fxp0 requested decoded memory range 0xd0204000-0xd0204fff fxp0: using memory space register mapping fxp0: Ethernet address 08:00:46:43:83:a5 fxp0: PCI IDs: 8086 1031 104d 80e7 0041 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI 00 00 ata0-master: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=00 stat1=01 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: port 0x66,0x62 on acpi0 sio0: irq maps: 0x209 0x219 0x209 0x209 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lp0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 acpi_ec0: info: new max delay is 3 us acpi_ec0: info: new max delay is 4 us unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi_ec0: info: new max delay is 10 us ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: