Date: Thu, 06 Apr 2000 21:07:26 +0200 From: Jens Rehsack <rehsack@informatik.uni-halle.de> To: Gary Jennejohn <garyj@muc.de>, Len Conrad <lconrad@Go2France.com>, Mike Tancsa <mike@sentex.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: connection problem: FreeBSD Computer does not respond Message-ID: <38ECE06E.6D8EBE50@informatik.uni-halle.de> References: <200004061245.OAA16236@peedub.muc.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Gary Jennejohn schrieb:
>
> Jens Rehsack writes:
> >Hi!
> >
> >Len Conrad schrieb:
> >>
> >> ifconfig <interface name> or
> >>
> >> ifconfig -a
> >>
> >> gives config info
> >
> >It does neither say sth. 'bout half duplex/full duplex nor sth.
> >about the connection spped (10MBit, 100MBit).
> >It only say sth. 'bout it's flags: UP,MULTICAST,BROADCAST,RUNNING,...
> >it's IP-Address and it's mac.
> >
> >> >How can I "detect" how the NIC is configured (HDx,FDx,etc.)?
> >> >"dmesg" doesn't show a message which contains this information.
> >> >May the IRQ the unhappy (10)?
> >> >
> >
>
> Plaeas do not provide a synopsis of the output, show us what ifconfig
> really puts out. Let us be the judge of what information is useful.
Okay.
# ifconfig vx0
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs
Coll
vx0 1500 <Link> 00.10.4b.d9.f8.df 26902 0 28141
3 0
vx0 1500 195.124.230.4 195.124.230.50 26902 0 28141
3 0
# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #2: Tue Apr 4 07:42:04 CEST 2000
root@mail.liwing.de:/usr/src/sys/compile/MAIL
Timecounter "i8254" frequency 1193182 Hz
CPU: i486DX (486-class CPU)
real memory = 33554432 (32768K bytes)
avail memory = 30437376 (29724K bytes)
Preloaded elf kernel "kernel" at 0xc0243000.
eisa0: <HIT01 (System Board)>
Probing for devices on the EISA bus
vx0: <3Com 3C597-TX Network Adapter> at 0x1000-0x101f, 0x1c80-0x1c89 irq
10
vx0: on eisa0 slot 1
utp/tx[*tx*] address 00:10:4b:d9:f8:df
ahc0: <Adaptec 274X SCSI host adapter> at 0x2c00-0x2cff irq 11 on eisa0
slot 2
ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, primary
B, 4/255 SCBs
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa
sio1: type 16450
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x3bc irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 1 target 0 lun 0
da0: <CONNER CFP2105S 2.14GB 1524> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da0: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da1 at ahc0 bus 0 target 0 lun 0
da1: <SEAGATE ST31230N 0290> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da1: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C)
cd0 at ahc0 bus 1 target 1 lun 0
cd0: <YAMAHA CDR200t 1.00> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [316347 x 2048 byte records]
changing root device to da0s1a
vx0: promiscuous mode enabled
vx0: promiscuous mode disabled
If anyone (not everyone!) special needs a login for detailed diagnostic,
I will provide him/her a per ssh available account on request.
Ciao
--
Jens Rehsack --- <rehsack@informatik.uni-halle.de>
http://www.informatik.uni-halle.de/~rehsack/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38ECE06E.6D8EBE50>