Date: Mon, 16 Jun 1997 07:53:45 -0600 From: Richard Memory <rmemory@phbtsus.com> To: freebsd-questions@FreeBSD.ORG Subject: x errors Message-ID: <33A54569.5DF9@phbtsus.com>
next in thread | raw e-mail | index | archive | help
I sent the following mail to the XFree86 people, and they say that "libXpm.so.4.10" is not part of XFree86, but should be part of my FreeBSD distribution. How do I install that file? ----begin included message I am trying to get XFree86 up and running on my machine. My machine is a pentium grade pc with a Diamond Stealth 2201 video card (S3 Trio 64 V+ with 2 Meg of RAM) and an old regular VGA monitor. I belive that my config file is correct for the hardware I have. I am using the S3 server, a horizontal scan freq of 31.5 kHz, and a vertical of 60 Hz. I didn't perform any RAMDAC or clockchip settings. I have installed on my machine, version 3.2 of XFree86 that came with my version 2.2.1 distribution of FreeBSD. I performed the installation about 3 weeks ago and haven't had x running yet. I logged in as root into one of the available virtual terminals and typed "xdm -nodaemon". After a few seconds, this provided me with an x login screen. I tried logging into my regular user account through this screen. The screen went black for a few seconds and then just simply returned me to the x login screen. I then returned back to the virtual terminal where I had started xdm, and typed <ctrl c> to kill xdm. I then went to my user directory and found a .xession-errors file that reported the following error: "ld.so failed: Can't find shared library "libXpm.so.4.10" After this, I tried the following command after logging in to another virtual terminal into my user account: "startx >& oufile" I have included this file at the end of this message. It contains the same error as above. My home directory of my user account contains the following "dot" files: .ctwmrc /* I want to use ctwm as my window manger. This file is simply a copy of the system.ctwmrc file I found in /usr/X11R6/lib/X11/xdm */ .Xresources /* I also simply copied this file from xdm directory */ .xinitrc /* I created this file from the example on the startx man page -- see below */ I have a couple of other generic questions: I am thinking that I will start xdm from my /etc/rc.local file (I don't have an /etc/inittab file nor do I know what it is), how will xdm know how to start ctwm instead of something like fvwm or the like? Do I need to continue using startx? Maybe from my .profile? Are there any other "dot" files that I am missing in my home directory? ----.xinitrc xrdb -load $HOME/.Xresources xsetroot -solid gray & xbiff -geometry -430+5 & oclock -geometry 75x75-0-0 & xload -geometry -80-0 & xterm -geometry +0+60 -ls & xconsole -geometry -0+0 -fn 5x7 & exec ctwm ---------output from startx XFree86 Version 3.2 / X Window System (protocol Version 11, revision 0, vendor release 6100) Release Date: Oct 26 1996 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.0 Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) S3: Graphics device ID: "Diamond Stealth64 Video 2001 series (2121/2201)" (**) S3: Monitor ID: "My Monitor" (--) S3: Mode "640x400" needs vert refresh rate of 69.93 Hz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) S3: Mode "320x200" needs vert refresh rate of 69.93 Hz. Deleted. (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xf4000000 (--) S3: card type: PCI (--) S3: Diamond Stealth BIOS found (--) S3: chipset: Trio64V+ rev. 541 (--) S3: chipset driver: newmmio (--) S3: videoram: 2048k (--) S3: Ramdac type: s3_trio64 (--) S3: Ramdac speed: 135 (--) S3: Using Trio32/64 programmable clock (MCLK 54.886 MHz) (--) S3: Maximum allowed dot-clock: 135.000 MHz (**) S3: Mode "640x480": mode clock = 25.175 (--) S3: There is no mode definition named "800x600" (--) S3: Removing mode "800x600" from list of valid modes. (--) S3: There is no mode definition named "1024x768" (--) S3: Removing mode "1024x768" from list of valid modes. (--) S3: There is no mode definition named "1280x1024" (--) S3: Removing mode "1280x1024" from list of valid modes. (--) S3: Using 6 bits per RGB value (--) S3: Virtual resolution set to 640x480 (--) S3: Local bus LAW is 0xF4000000 (--) S3: Using a banksize of 2048k, line width of 640 (--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps (--) S3: Using 8 planes of 640x2730 at (0,546) aligned 8 as font cache PEX extension module not loaded XIE extension module not loaded ld.so failed: Can't find shared library "libXpm.so.4.10" xload: can't open kvm files ¨Ý¿ï®Ý¿ï¸Ý¿ï waiting for X server to shut down
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?33A54569.5DF9>