Date: Thu, 13 Jan 2000 23:55:52 +0900 From: NOKUBI Hirotaka <hnokubi@yyy.or.jp> To: "Kenneth D. Merry" <ken@kdm.org> Cc: Jonathan Lemon <jlemon@flugsvamp.com>, Andrew Gallatin <gallatin@cs.duke.edu>, hackers@FreeBSD.ORG, smp@FreeBSD.ORG Subject: Re: Dell PowerEdge 2400 & RCC PCI chipset? Message-ID: <20000113150019.0CD0F15587@hub.freebsd.org> In-Reply-To: Your message of "Tue, 11 Jan 2000 12:54:53 -0700 ." <20000111125453.A76466@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <20000111125453.A76466@panzer.kdm.org>, "Kenneth D. Merry" writes:
>On Tue, Jan 11, 2000 at 13:49:59 -0600, Jonathan Lemon wrote:
>> The RCC is probably this one:
>>
>> pci: unknown ATA vendor = 0x1166, device = 0x0211
>>
>>
>> I wonder why it flags it as a ATA device, I'm pretty sure this is the
>> RCC chip -- the vendor id matches. (I checked this time.)
>
>It's proably the chip class or something. That could well be an IDE chip,
>though. Intel's chipsets usually include an IDE controller.
>
>Does anyone have a URL for "RCC"?
I also want to know a URL.
My NEC PC98 (using x86 CPU, but not PC-AT compatible) uses
RCC Champion as it's chipset. (Sorry not Champion II/III, it's slightly
old machine.) I'll attach dmesg from it.
RCC Champion is attached like this.
> pcib0: <Ross (?) host to PCI bridge> on motherboard
FreeBSD-3.2 (I'm not sure, 3.1?) was running fine too.
----
NOKUBI Hirotaka
Fingerprint20 = DEBC 0793 7CD6 92F1 0A1F A792 9E2F EEEE A41B 171D
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1994-1999 FreeBSD(98) porting team.
Copyright (c) 1992 A.Kojima F.Ukai M.Ishii (KMC).
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Tue Dec 14 23:41:04 JST 1999
h-nokubi@alphazeal.nokubi.or.jp:/usr/src/src/sys/compile/MP
Calibrating clock(s) ... TSC clock: 265922163 Hz, i8254 clock: 2457598 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 2457600 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II (265.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 100638720 (98280K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00318000 - 0x05ff7fff, 97386496 bytes (23776 pages)
avail memory = 94453760 (92240K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpint 7 -> irq 8
IOAPIC #0 intpint 8 -> irq 9
IOAPIC #0 intpint 9 -> irq 10
IOAPIC #0 intpint 10 -> irq 11
IOAPIC #0 intpint 11 -> irq 12
IOAPIC #0 intpint 12 -> irq 13
IOAPIC #0 intpint 13 -> irq 14
IOAPIC #0 intpint 14 -> irq 15
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00f4c40
bios32: Entry = 0xf5612 (c00f5612) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1bb9b
pnpbios: Found PnP BIOS data at 0xc00f51b0
pnpbios: Entry = d8000:3a Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel.up" at 0xc02fc000.
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00051166)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00051166)
pcib0: <Ross (?) host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0005, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1033, dev=0x003b, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1033, dev=0x0009, revid=0x02
class=03-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x9004, dev=0x6078, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00006800, size 8
map[14]: type 1, range 32, base 20000000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base 20001000, size 12
map[14]: type 1, range 32, base 00006000, size 5
map[18]: type 1, range 32, base fed00000, size 20
found-> vendor=0x102b, dev=0x0519, revid=0x01
class=03-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 20004000, size 14
map[14]: type 1, range 32, base 23000000, size 23
pci0: <PCI bus> on pcib0
isab0: <NEC 003B PCI to PC-98 C-bus bridge> at device 6.0 on pci0
isa0: <ISA bus> on isab0
vga-pci0: <NEC model 0009 PCI to PC-98 Core Graph bridge> at device 7.0 on pci0
ahc0: <Adaptec aic7860 SCSI adapter> irq 10 at device 10.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
ahc0: Downloading Sequencer Program... 409 instructions downloaded
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 3 at device 11.0 on pci0
fxp0: Ethernet address 00:00:4c:13:ea:bc
vga-pci1: <Matrox MGA 2064W graphics accelerator> irq 10 at device 14.0 on pci0
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0 at port 0x90-0x97 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
wdc0 at port 0x640-0x647 irq 9 on isa0
wdc0: unit 1 (atapi): <NEC PD-1 ODX654P/A113>, removable, iordis
wcd0: drive speed 1033KB/sec, 256KB cache
wcd0: supported read types: CD-DA
wcd0: Audio: play, 256 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
pckbd0: <PC-98 Keyboard> at port 0x41 irq 1 on isa0
kbd0: pckbd0, generic (0), config:0x0, flags:0x1d0000
gdc0: <Generic GDC> on isa0
fb0: gdc0, gdc, type:PC-98x1 (6), flags:0x70043
fb0: port:0x60-0x6f, crtc:0x60, mem:0xa0000 0x48000
fb0: init mode:98, bios mode:98, current mode:98
fb0: window:0xc00a0000 size:32k gran:32k, buf:0 size:0k
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x0>
sc0: fb0 kbd0
sio0 at port 0x30 irq 4 on isa0
sio0: type 8251 (internal fast)
sio1: irq maps: 0x8001 0x8021 0x8001 0x8001
sio1 at port 0x238 irq 5 flags 0x12000010 on isa0
sio1: type 16550A, console
ppc: parallel port found at 0x140
ppc0: ECP SPP ECP+EPP SPP
ppc0 at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip: irq 14
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
mse0 at port 0x7fd9 irq 13 on isa0
mss0 at port 0xf40 irq 12 drq 1 on isa0
[IRQ Conflict?]snd0: <MS Sound System0 (CS4231A)>
isa_probe_children: probing PnP devices
stray irq 7
SMP: enabled INTs: 1, 3, 4, 5, 7, 9, 10, 11, 12, 13, 14, apic_imen: 0x00ff8145
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
APIC_IO: routing 8254 via 8259 on pin 0
new masks: bio 48000a00, tty 43006032, net 4700603a
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
ahc0: Selection Timeout on A:1. 1 SCBs aborted
ahc0: Selection Timeout on A:2. 1 SCBs aborted
ahc0: Selection Timeout on A:3. 1 SCBs aborted
ahc0: Selection Timeout on A:4. 1 SCBs aborted
ahc0: Selection Timeout on A:5. 1 SCBs aborted
ahc0: Selection Timeout on A:6. 1 SCBs aborted
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DCAS-32160 S61A> Fixed Direct Access SCSI-2 device
pass0: Serial Number F25D9969
pass0: 20.000MB/s transfers (20.000MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-32160 S61A> Fixed Direct Access SCSI-2 device
da0: Serial Number F25D9969
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 2063MB (4226725 512 byte sectors: 8H 32S/T 16509C)
Mounting root from ufs:/dev/da0s2a
da0s1: mid 0xa0, start 256, end = 1024255, size 1024000: OK
da0s2: mid 0x94, start 1024256, end = 2048255, size 1024000: OK
da0s3: mid 0xa0, start 2048256, end = 2458111, size 409856: OK
da0s4: mid 0x94, start 2458112, end = 4226303, size 1768192: OK
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000113150019.0CD0F15587>