Date: Wed, 2 Oct 2002 00:33:32 +0200 From: Mario Hoerich <m@MHoerich.de> To: freebsd-stable@freebsd.org Subject: Re: PCM broken in 4.7RC Message-ID: <20021001223332.GB169@Pandora.localhost> In-Reply-To: <20021001072934.GA60135@erg.verweg.com> References: <1033448723.485.13.camel@xyzzy.intranet.snsonline.net> <20021001072934.GA60135@erg.verweg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
#define '>' Ruben van Staveren:
[ pcm ceased working ]
>
> We are talking about an AudioPCI ES1370 on an Asus P2B-DS
Creative SB 512 PCI on Asus A7V266 here.
********
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RC #0: Tue Sep 24 02:52:46 CEST 2002
root@Pandora:/mnt/bsd1/obj/usr/src/sys/MARIO
Calibrating clock(s) ... TSC clock: 1476822349 Hz, i8254 clock: 1192755 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (1477.36-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536788992 (524208K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003f4000 - 0x1ffe3fff, 532611072 bytes (130032 pages)
avail memory = 518795264 (506636K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f1df0
bios32: Entry = 0xf1580 (c00f1580) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1780
pnpbios: Found PnP BIOS data at 0xc00fbd70
pnpbios: Entry = f0000:bda0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f7650
Preloaded elf kernel "kernel" at 0xc03cd000.
Preloaded elf module "splash_bmp.ko" at 0xc03cd0a8.
Preloaded elf module "vesa.ko" at 0xc03cd14c.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc03cd1e8.
Preloaded elf module "agp.ko" at 0xc03cd238.
VESA: information block
56 45 53 41 00 03 80 00 00 01 00 00 00 00 cb 78
00 c0 80 00 6b 01 00 01 00 01 14 01 00 01 24 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 0 mode(s) found
********
BTW:
XFree86-4.2.1/vesa doesn't like my VividXS (AGP,
Kyro II based) either. Any chance to make this work
(except buying new hardware)?
********
module_register_init: MOD_LOAD (vesa, c0348cdc, 0) error 6
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
splash: image@0xc034b3fc, size:481074
splash_bmp: No appropriate video mode found
bmp_start(): splash_mode:-1
module_register_init: MOD_LOAD (splash_bmp, c03427a4, 0) error 19
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010018
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
Using $PIR table, 9 entries at 0xc00f1d30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x3099, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x1106, dev=0xb099, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1102, dev=0x0002, revid=0x08
class=04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x1102, dev=0x7002, revid=0x08
class=09-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10ec, dev=0x8029, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x1106, dev=0x3074, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000a800, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x1b
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 0000a400, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x1b
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 0000a000, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x1b
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 00009800, size 5
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
found-> vendor=0x104a, dev=0x0010, revid=0x0f
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0000000, size 27
map[14]: type 1, range 32, base ef800000, size 19
map[18]: type 1, range 32, base 0000d800, size 8
pci1: <PCI bus> on pcib1
pci1: <SGS-Thomson model 0010 VGA-compatible display device> (vendor=0x104a, dev=0x0010) at 0.0 irq 11
pcm0: <Creative EMU10K1> at device 12.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
pci0: <unknown card> (vendor=0x10ec, dev=0x8029) at 15.0
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xa800
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA 01 a5
ata0-slave: ATA 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xa808
ata1: mask=03 ostat0=50 ostat2=40
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.2 irq 5
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.3 irq 5
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.4 irq 5
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 20 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
new masks: bio 68c000, tty 63109a, net 67109a
ad0: success setting UDMA5 on VIA chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <MAXTOR 4K040H2/A08.1500> ATA-5 disk at ata0-master
ad0: 38182MB (78198750 sectors), 77578 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad1: success setting UDMA2 on VIA chip
Creating DISK ad1
ar: FreeBSD check1 failed
ad1: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-slave
ad1: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=2 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <LG DVD-ROM DRD-8160B/1.00> DVD-ROM drive at ata1 as master
acd0: read 1031KB/s (32KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd1: <CREATIVE CD-RW RW8435E/V:00BC03> CD-RW drive at ata1 as slave
acd1: read 1378KB/s (4021KB/s) write 343KB/s (1375KB/s), 4096KB buffer, PIO4
acd1: Reads: CD-R, CD-RW, CD-DA stream, packet
acd1: Writes: CD-R, CD-RW, test write
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked, lock protected
acd1: Medium: no/blank disc
Mounting root from ufs:/dev/ad1s1a
ad1s1: type 0xa5, start 63, end = 4096574, size 4096512 : OK
ad1s2: type 0xf, start 16434495, end = 19759949, size 3325455 : OK
ad1s3: type 0x6, start 4096575, end = 7855784, size 3759210 : OK
ad1s4: type 0xa5, start 7855785, end = 16434494, size 8578710 : OK
ad1s5: type 0x6, start 16434558, end = 19759949, size 3325392 : OK
start_init: trying /sbin/init
ad0s1: type 0xc, start 63, end = 78188354, size 78188292 : OK
splash: image decoder found: daemon_saver
Linux ELF exec handler installed
********
Config:
********
machine i386
cpu I586_CPU
cpu I686_CPU
ident MARIO
maxusers 10
makeoptions DEBUG=-g
options INCLUDE_CONFIG_FILE
options MATH_EMULATE
options INET
options INET6
options FFS
options FFS_ROOT
options SOFTUPDATES
options UFS_DIRHASH
options MFS
options MD_ROOT
options MSDOSFS
options CD9660
options CD9660_ROOT
options PROCFS
options COMPAT_43
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM
options KBD_INSTALL_CDEV
device isa
device pci
device agp
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk
device atapicd
options ATA_STATIC_ID
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
options SC_HISTORY_SIZE=500
options SC_ALT_MOUSE_IMAGE
options SC_PIXEL_MODE
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
device ppc0 at isa? irq 7
device ppbus
device lpt
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun
pseudo-device pty
pseudo-device md
pseudo-device gif
pseudo-device faith
device pcm
device sbc
options DDB
options PERFMON
********
Bye.
Mario
--
ejm (_ ) "Unix gives you just enough rope to hang yourself -- and then a
\\\'',) ^ couple of more feet, just to be sure." (Eric Allman)
\/ \(
.\._/_) "... We make rope." (Rob Gingell on Sun's new virtual memory)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021001223332.GB169>