Date: Mon, 16 Dec 2019 20:33:08 -0600 From: Kyle Evans <kevans@freebsd.org> To: ykla <yklaxds@gmail.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: How to boot freebsd on rpi4b? Message-ID: <CACNAnaEAcZxVjWuOFW5fbKNoPM1Sste1%2BWj7=uiy8Nx3dSzh5A@mail.gmail.com> In-Reply-To: <CA%2BPGaYCwhVZ792hNLXrO-knReHC-85wXk5wrNzconOYWSGsJ0A@mail.gmail.com> References: <CA%2BPGaYB4_ef2xgdNv=0ZfHJXFOHTt4UgCgM02cZi1s5vo%2BaVXw@mail.gmail.com> <CACNAnaG7EMDX06_iuhNzKq=RgM8ZvzSrYApmKSMQN7VjkLGgmg@mail.gmail.com> <CA%2BPGaYDaUp2nQhN%2BtE23Wxa04sM2EZ7CeNkseRjWs2zUgzyK-g@mail.gmail.com> <CA%2BPGaYCwhVZ792hNLXrO-knReHC-85wXk5wrNzconOYWSGsJ0A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 16, 2019 at 8:30 PM ykla <yklaxds@gmail.com> wrote: > ykla <yklaxds@gmail.com> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817=E6=97=A5=E5= =91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:27=E5=86=99=E9=81=93=EF=BC=9A >> Kyle Evans <kevans@freebsd.org> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817=E6= =97=A5=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:04=E5=86=99=E9=81=93=EF=BC=9A >>> >>> On Mon, Dec 16, 2019 at 7:50 PM ykla <yklaxds@gmail.com> wrote: >>> > >>> > Hi, I download latest version 12.12 current 13 img and write in TF ca= rd. >>> > Then I download rpi-firmware(2019-12-05 16:15:16) and extract and co= py it >>> > in BOOT partition. And look at my screen shows me that stop boot on l= o0 >>> > state. I know it can't support USB/PCI/ethernet and I just want to in= stall >>> > it. Thanks. >>> >>> That's a most curious failure mode... if you got to the point where >>> we're bringing up lo0, it should have either been fine or blown up >>> terribly in an obvious way -- I'll reimage tomorrow-ish based on the >>> latest snapshot and see if I can reproduce. >>> >>> In the meantime, can you post a transcript of the boot? >>> >>> Thanks, >>> >>> Kyle Evans >> >> New error: stopped at >> Warning: no time-of-day clock registered. system time will not be set ac= curately. > > I just reboot and bugs show: > lo0 :link state change to UP. > Can you scroll up to just above that sdhci output and take another picture? (above the =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D) Thanks, Kyle Evans
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACNAnaEAcZxVjWuOFW5fbKNoPM1Sste1%2BWj7=uiy8Nx3dSzh5A>