Date: Thu, 12 Aug 2004 20:18:17 +0100 From: Hugo Silva <sysadmin@virtualbullet.com> To: freebsd-questions@freebsd.org, freebsd-smp@freebsd.org Subject: Re: 5.2.1-p9 kernel hang (unknown reason, but more info) Message-ID: <411BC279.8050500@virtualbullet.com> In-Reply-To: <411BBFD9.40908@virtualbullet.com> References: <41190382.9060001@virtualbullet.com> <411BBFD9.40908@virtualbullet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hugo Silva wrote: > Hey list, > > My last move on the server trouble was changing back some sysctl's to > their original values. > Here is how loader.conf and sysctl.conf look now: > (the #commented values were the sysctls active when the server used to > die. one of these was causing the problem, > since the server has been running for 2 days now (just got rebooted, > but it didnt panic because it wouldn't have come back on its own and > it wasn't rebooted by me.. datacenter must have reset it) when it > wouldn't run for more than 8 hours until panic. > > > sysctl.conf: > > security.bsd.see_other_uids=0 > net.inet.tcp.recvspace=32768 > net.inet.tcp.sendspace=32768 > net.inet.icmp.drop_redirect=1 > net.inet.tcp.blackhole=2 > net.inet.udp.blackhole=2 > net.inet.tcp.log_in_vain=0 > net.inet.udp.log_in_vain=0 > kern.maxfiles=32768 > security.jail.set_hostname_allowed=0 > #kern.maxfilesperproc=2000 > #kern.maxprocperuid=400 > kern.coredump=0 > net.inet.tcp.msl=7500 > kern.ipc.somaxconn=16424 > > loader.conf: > > hint.acpi.0.disabled=1 > #kern.ipc.nmbclusters=32768 > #kern.ipc.maxsockets=16424 > kern.maxproc=8000 > boot_verbose="YES" > > > In my opinion, it was kern.ipc.nmbclusters causing the problem.. now > I've set it as default: kern.ipc.nmbclusters: 25600 > > Can anyone confirm this high value of nmbclusters could cause a panic > on 5.2.1-RELEASE-p9 ? Perhaps this is a bug > fixed in -CURRENT? > > One of the sysctls that are now commented out was causing the problem. > > p.s: reply to the mailing lists, I am not subscribed with this email > but need to use it since I can't send this large copy by my webmail > (it stalls). > > Many thanks! > > Regards, > > Hugo > > > > Hugo Silva wrote: > >> (note: I'm not subscribed to the list with this email, but I couldn't >> send this large mail by my webmail) >> >> Hey list, >> >> >> Recently my server started failing daily, I though it was because of >> high loads. Now it even goes down if completely idle after a few hours. >> >> I *still* don't have the panic message (lazy datacenter lol) but I >> booted the server with verbose enabled and got the list of hardware. >> I also removed any optimizations in sysctl stuff I had added >> (maxfiles, maxprocs, ipc stuff, etc, all defaults now) >> >> The server ran fine for the first 20 days or so, then it kept dying >> on a daily basis. Unfortunately i still don't have the panic message. >> But if someone can give some hints based on hardware >> list+dmesg+mptable, it would help. I've been shooting in the dark so >> far.. >> >> >> Here is the dmesg (long): >> >> Frequency 1193182 Hz quality 0 >> Calibrating TSC clock ... TSC clock: 2800121436 Hz >> CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.12-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 >> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Hyperthreading: 2 logical CPUs >> real memory = 4088397824 (3899 MB) >> Physical memory chunk(s): >> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) >> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) >> 0x0000000000c29000 - 0x00000000ef64ffff, 4003622912 bytes (977447 pages) >> avail memory = 3973623808 (3789 MB) >> APIC ID: physical 0, logical 0:0 >> APIC ID: physical 1, logical 0:1 >> APIC ID: physical 6, logical 0:2 >> APIC ID: physical 7, logical 0:3 >> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> cpu2 (AP): APIC ID: 6 >> cpu3 (AP): APIC ID: 7 >> bios32: Found BIOS32 Service Directory header at 0xc00fdb70 >> bios32: Entry = 0xfdb80 (c00fdb80) Rev = 0 Len = 1 >> pcibios: PCI BIOS entry at 0xf0000+0xdba1 >> pnpbios: Found PnP BIOS data at 0xc00f4420 >> pnpbios: Entry = f0000:32c4 Rev = 1.0 >> Other BIOS signatures found: >> ioapic0: Assuming intbase of 0 >> ioapic0: intpin 0 -> ExtINT (edge, activehi) >> ioapic0: intpin 1 -> irq 1 (edge, activehi) >> ioapic0: intpin 2 -> irq 2 (edge, activehi) >> ioapic0: intpin 3 -> irq 3 (edge, activehi) >> ioapic0: intpin 4 -> irq 4 (edge, activehi) >> ioapic0: intpin 5 -> irq 5 (edge, activehi) >> ioapic0: intpin 6 -> irq 6 (edge, activehi) >> ioapic0: intpin 7 -> irq 7 (edge, activehi) >> ioapic0: intpin 8 -> irq 8 (edge, activehi) >> ioapic0: intpin 9 -> irq 9 (edge, activehi) >> ioapic0: intpin 10 -> irq 10 (edge, activehi) >> ioapic0: intpin 11 -> irq 11 (edge, activehi) >> ioapic0: intpin 12 -> irq 12 (edge, activehi) >> ioapic0: intpin 13 -> irq 13 (edge, activehi) >> ioapic0: intpin 14 -> irq 14 (edge, activehi) >> ioapic0: intpin 15 -> irq 15 (edge, activehi) >> ioapic1: Assuming intbase of 16 >> ioapic1: intpin 0 -> irq 16 (level, activelo) >> ioapic1: intpin 1 -> irq 17 (level, activelo) >> ioapic1: intpin 2 -> irq 18 (level, activelo) >> ioapic1: intpin 3 -> irq 19 (level, activelo) >> ioapic1: intpin 4 -> irq 20 (level, activelo) >> ioapic1: intpin 5 -> irq 21 (level, activelo) >> ioapic1: intpin 6 -> irq 22 (level, activelo) >> ioapic1: intpin 7 -> irq 23 (level, activelo) >> ioapic1: intpin 8 -> irq 24 (level, activelo) >> ioapic1: intpin 9 -> irq 25 (level, activelo) >> ioapic1: intpin 10 -> irq 26 (level, activelo) >> ioapic1: intpin 11 -> irq 27 (level, activelo) >> ioapic1: intpin 12 -> irq 28 (level, activelo) >> ioapic1: intpin 13 -> irq 29 (level, activelo) >> ioapic1: intpin 14 -> irq 30 (level, activelo) >> ioapic1: intpin 15 -> irq 31 (level, activelo) >> ioapic2: Assuming intbase of 32 >> ioapic2: intpin 0 -> irq 32 (level, activelo) >> ioapic2: intpin 1 -> irq 33 (level, activelo) >> ioapic2: intpin 2 -> irq 34 (level, activelo) >> ioapic2: intpin 3 -> irq 35 (level, activelo) >> ioapic2: intpin 4 -> irq 36 (level, activelo) >> ioapic2: intpin 5 -> irq 37 (level, activelo) >> ioapic2: intpin 6 -> irq 38 (level, activelo) >> ioapic2: intpin 7 -> irq 39 (level, activelo) >> ioapic2: intpin 8 -> irq 40 (level, activelo) >> ioapic2: intpin 9 -> irq 41 (level, activelo) >> ioapic2: intpin 10 -> irq 42 (level, activelo) >> ioapic2: intpin 11 -> irq 43 (level, activelo) >> ioapic2: intpin 12 -> irq 44 (level, activelo) >> ioapic2: intpin 13 -> irq 45 (level, activelo) >> ioapic2: intpin 14 -> irq 46 (level, activelo) >> ioapic2: intpin 15 -> irq 47 (level, activelo) >> ioapic3: Assuming intbase of 48 >> ioapic3: intpin 0 -> irq 48 (level, activelo) >> ioapic3: intpin 1 -> irq 49 (level, activelo) >> ioapic3: intpin 2 -> irq 50 (level, activelo) >> ioapic3: intpin 3 -> irq 51 (level, activelo) >> ioapic3: intpin 4 -> irq 52 (level, activelo) >> ioapic3: intpin 5 -> irq 53 (level, activelo) >> ioapic3: intpin 6 -> irq 54 (level, activelo) >> ioapic3: intpin 7 -> irq 55 (level, activelo) >> ioapic3: intpin 8 -> irq 56 (level, activelo) >> ioapic3: intpin 9 -> irq 57 (level, activelo) >> ioapic3: intpin 10 -> irq 58 (level, activelo) >> ioapic3: intpin 11 -> irq 59 (level, activelo) >> ioapic3: intpin 12 -> irq 60 (level, activelo) >> ioapic3: intpin 13 -> irq 61 (level, activelo) >> ioapic3: intpin 14 -> irq 62 (level, activelo) >> ioapic3: intpin 15 -> irq 63 (level, activelo) >> ioapic1: intpin 13 trigger: level >> ioapic1: intpin 13 polarity: active-lo >> ioapic1: intpin 1 trigger: level >> ioapic1: intpin 1 polarity: active-lo >> ioapic1: intpin 10 trigger: level >> ioapic1: intpin 10 polarity: active-lo >> ioapic1: intpin 12 trigger: level >> ioapic1: intpin 12 polarity: active-lo >> ioapic0: intpin 1 trigger: edge >> ioapic0: intpin 1 polarity: active-hi >> ioapic0: Routing IRQ 0 -> intpin 2 >> ioapic0: intpin 2 trigger: edge >> ioapic0: intpin 2 polarity: active-hi >> ioapic0: intpin 3 trigger: edge >> ioapic0: intpin 3 polarity: active-hi >> ioapic0: intpin 4 trigger: edge >> ioapic0: intpin 4 polarity: active-hi >> ioapic0: intpin 5 trigger: edge >> ioapic0: intpin 5 polarity: active-hi >> ioapic0: intpin 6 trigger: edge >> ioapic0: intpin 6 polarity: active-hi >> ioapic0: intpin 7 trigger: edge >> ioapic0: intpin 7 polarity: active-hi >> ioapic0: intpin 8 trigger: edge >> ioapic0: intpin 8 polarity: active-hi >> ioapic0: intpin 12 trigger: edge >> ioapic0: intpin 12 polarity: active-hi >> ioapic0: intpin 13 trigger: edge >> ioapic0: intpin 13 polarity: active-hi >> ioapic0: intpin 14 trigger: edge >> ioapic0: intpin 14 polarity: active-hi >> ioapic0: intpin 15 trigger: edge >> ioapic0: intpin 15 polarity: active-hi >> lapic: Routing ExtINT -> LINT0 >> lapic: LINT0 trigger: edge >> lapic: LINT0 polarity: active-hi >> lapic: Routing NMI -> LINT1 >> lapic: LINT1 trigger: edge >> lapic: LINT1 polarity: active-hi >> ioapic0 <Version 1.1> irqs 0-15 on motherboard >> ioapic1 <Version 1.1> irqs 16-31 on motherboard >> ioapic2 <Version 1.1> irqs 32-47 on motherboard >> ioapic3 <Version 1.1> irqs 48-63 on motherboard >> cpu0 BSP: >> ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> wlan: <802.11 Link Layer> >> null: <null device, zero device> >> random: <entropy source> >> mem: <memory & I/O> >> Pentium Pro MTRR support enabled >> npx0: [FAST] >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> pci_open(1):mode 1 addr port (0x0cf8) is 0x800078ac >> pci_open(1a):mode1res=0x80000000 (0x80000000) >> pci_cfgcheck:device 0 [class=060000] [hdr=80] is there (id=00171166) >> pcibios: BIOS version 2.10 >> Using $PIR table, 12 entries at 0xc00f4a20 >> PCI-Only Interrupts: none >> Location Bus Device Pin Link IRQs >> embedded 0 15 A 0x01 10 >> slot 1 0 5 A 0x14 3 4 5 7 9 10 11 12 14 15 >> slot 1 0 5 B 0x15 3 4 5 7 9 10 11 12 14 15 >> slot 1 0 5 C 0x10 3 4 5 7 9 10 11 12 14 15 >> slot 1 0 5 D 0x11 3 4 5 7 9 10 11 12 14 15 >> slot 2 0 4 A 0x12 3 4 5 7 9 10 11 12 14 15 >> slot 2 0 4 B 0x13 3 4 5 7 9 10 11 12 14 15 >> slot 2 0 4 C 0x18 3 4 5 7 9 10 11 12 14 15 >> slot 2 0 4 D 0x19 3 4 5 7 9 10 11 12 14 15 >> slot 3 0 3 A 0x10 3 4 5 7 9 10 11 12 14 15 >> slot 3 0 3 B 0x11 3 4 5 7 9 10 11 12 14 15 >> slot 3 0 3 C 0x1e 3 4 5 7 9 10 11 12 14 15 >> slot 3 0 3 D 0x1f 3 4 5 7 9 10 11 12 14 15 >> slot 4 0 6 A 0x16 3 4 5 7 9 10 11 12 14 15 >> slot 4 0 6 B 0x17 3 4 5 7 9 10 11 12 14 15 >> slot 4 0 6 C 0x12 3 4 5 7 9 10 11 12 14 15 >> slot 4 0 6 D 0x13 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 7 A 0x18 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 7 B 0x19 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 7 C 0x14 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 7 D 0x15 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 2 A 0x12 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 2 B 0x13 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 2 C 0x12 3 4 5 7 9 10 11 12 14 15 >> slot 5 0 2 D 0x13 3 4 5 7 9 10 11 12 14 15 >> embedded 0 8 A 0x1c 3 4 5 7 9 10 11 12 14 15 >> embedded 0 9 A 0x1a 3 4 5 7 9 10 11 12 14 15 >> embedded 0 10 A 0x1e 3 4 5 7 9 10 11 12 14 15 >> embedded 0 10 B 0x1f 3 4 5 7 9 10 11 12 14 15 >> embedded 0 11 A 0x1d 3 4 5 7 9 10 11 12 14 15 >> embedded 0 0 C 0x62 3 4 5 7 9 10 11 12 14 15 >> embedded 0 0 D 0x62 3 4 5 7 9 10 11 12 14 15 >> pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard >> pci0: <PCI bus> on pcib0 >> pci0: physical bus=0 >> found->vendor=0x1166, dev=0x0017, revid=0x32 >> bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found->vendor=0x1166, dev=0x0017, revid=0x00 >> bus=0, slot=0, func=1 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type 1, range 32, base feb40000, size 17, enabled >> map[18]: type 4, range 32, base 0000e000, size 6, enabled >> pcib0: slot 8 INTA routed to irq 28 >> found->vendor=0x8086, dev=0x100e, revid=0x02 >> bus=0, slot=8, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=28 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type 1, range 32, base feb80000, size 17, enabled >> map[18]: type 4, range 32, base 0000e400, size 6, enabled >> pcib0: slot 9 INTA routed to irq 26 >> found->vendor=0x8086, dev=0x100e, revid=0x02 >> bus=0, slot=9, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=26 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type 1, range 32, base fd000000, size 24, enabled >> map[14]: type 4, range 32, base 0000e800, size 8, enabled >> map[18]: type 1, range 32, base febff000, size 12, enabled >> pcib0: slot 11 INTA routed to irq 29 >> found->vendor=0x1002, dev=0x4752, revid=0x27 >> bus=0, slot=11, func=0 >> class=03-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=29 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> found->vendor=0x1166, dev=0x0203, revid=0xa0 >> bus=0, slot=15, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0107, statreg=0x2200, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type 4, range 32, base 000001f0, size 3, enabled >> map[14]: type 4, range 32, base 000003f4, size 2, enabled >> map[18]: type 4, range 32, base 00000170, size 3, enabled >> map[1c]: type 4, range 32, base 00000374, size 2, enabled >> map[20]: type 4, range 32, base 0000ffa0, size 4, enabled >> found->vendor=0x1166, dev=0x0213, revid=0xa0 >> bus=0, slot=15, func=1 >> class=01-01-8a, hdrtype=0x00, mfdev=1 >> cmdreg=0x0015, statreg=0x0200, cachelnsz=8 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type 1, range 32, base febfd000, size 12, enabled >> pcib0: slot 15 INTA routed to irq 17 >> found->vendor=0x1166, dev=0x0221, revid=0x05 >> bus=0, slot=15, func=2 >> class=0c-03-10, hdrtype=0x00, mfdev=1 >> cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) >> intpin=a, irq=17 >> found->vendor=0x1166, dev=0x0227, revid=0x00 >> bus=0, slot=15, func=3 >> class=06-01-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port >> 0xe000-0xe03f mem 0xfeb40000-0xfeb5ffff irq 28 at device 8.0 on pci0 >> em0: bpf attached >> em0: Speed:N/A Duplex:N/A >> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port >> 0xe400-0xe43f mem 0xfeb80000-0xfeb9ffff irq 26 at device 9.0 on pci0 >> em1: bpf attached >> em1: Speed:N/A Duplex:N/A >> pci0: <display, VGA> at device 11.0 (no driver attached) >> atapci0: <ServerWorks CSB6 UDMA100 controller> port >> 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at >> device 15.1 on pci0 >> ata0: reset tp1 mask=03 ostat0=50 ostat1=50 >> ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 >> ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 >> ata0: reset tp2 mask=03 stat0=50 stat1=50 >> devices=0x3<ATA_SLAVE,ATA_MASTER> >> ata0: at 0x1f0 irq 14 on atapci0 >> ata0: [MPSAFE] >> ata1: reset tp1 mask=03 ostat0=50 ostat1=00 >> ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 >> ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 >> ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> >> ata1: at 0x170 irq 15 on atapci0 >> ata1: [MPSAFE] >> ohci0: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq >> 17 at device 15.2 on pci0 >> ohci0: (New OHCI DeviceId=0x02211166) >> usb0: OHCI version 1.0, legacy support >> usb0: SMM does not respond, resetting >> usb0: <OHCI (generic) USB controller> on ohci0 >> usb0: USB revision 1.0 >> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 4 ports with 4 removable, self powered >> isab0: <PCI-ISA bridge> at device 15.3 on pci0 >> isa0: <ISA bus> on isab0 >> pcib255: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus >> 255 on motherboard >> pci255: <PCI bus> on pcib255 >> pci255: physical bus=255 >> unknown: status reg test failed ff >> unknown: status reg test failed ff >> unknown: status reg test failed ff >> unknown: status reg test failed ff >> unknown: status reg test failed ff >> unknown: status reg test failed ff >> ata: ata0 already exists; skipping it >> ata: ata1 already exists; skipping it >> Trying Read_Port at 203 >> Trying Read_Port at 243 >> Trying Read_Port at 283 >> Trying Read_Port at 2c3 >> Trying Read_Port at 303 >> Trying Read_Port at 343 >> Trying Read_Port at 383 >> Trying Read_Port at 3c3 >> ex_isa_identify() >> pnpbios: 15 devices, largest 234 bytes >> pnpbios: handle 0 device ID PNP0c01 (010cd041) >> PNP0200: adding dma mask 0x10 >> PNP0200: adding io range 0-0xf, size=0x10, align=0x1 >> PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1 >> PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1 >> PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1 >> pnpbios: handle 2 device ID PNP0200 (0002d041) >> PNP0100: adding irq mask 0x1 >> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 >> pnpbios: handle 3 device ID PNP0100 (0001d041) >> PNP0b00: adding irq mask 0x100 >> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 >> pnpbios: handle 4 device ID PNP0b00 (000bd041) >> PNP0303: adding irq mask 0x2 >> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 >> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 >> pnpbios: handle 5 device ID PNP0303 (0303d041) >> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 >> pnpbios: handle 6 device ID PNP0800 (0008d041) >> PNP0c04: adding irq mask 0x2000 >> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 >> pnpbios: handle 7 device ID PNP0c04 (040cd041) >> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 >> PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 >> PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 >> PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1 >> PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1 >> PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1 >> PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1 >> PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1 >> PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0x1 >> PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1 >> PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1 >> PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1 >> PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1 >> PNP0c02: adding io range 0x374-0x375, size=0x2, align=0x1 >> PNP0c02: adding io range 0x377-0x377, size=0x1, align=0x1 >> pnpbios: handle 8 device ID PNP0c02 (020cd041) >> PNP0c02: adding io range 0x2e-0x2e, size=0x1, align=0x1 >> PNP0c02: adding io range 0x2f-0x2f, size=0x1, align=0x1 >> PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1 >> PNP0c02: adding io range 0x500-0x51f, size=0x20, align=0x1 >> PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 >> pnpbios: handle 9 device ID PNP0c02 (020cd041) >> pnpbios: handle 10 device ID PNP0a03 (030ad041) >> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 >> PNP0501: adding irq mask 0x10 >> pnpbios: handle 11 device ID PNP0501 (0105d041) >> PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 >> PNP0501: adding irq mask 0x8 >> pnpbios: handle 12 device ID PNP0501 (0105d041) >> PNP0401: adding io range 0x378-0x37b, size=0x4, align=0x8 >> PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8 >> PNP0401: adding irq mask 0x80 >> PNP0401: adding dma mask 0x8 >> pnpbios: handle 13 device ID PNP0401 (0104d041) >> PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 >> PNP0700: adding irq mask 0x40 >> PNP0700: adding dma mask 0x4 >> pnpbios: handle 14 device ID PNP0700 (0007d041) >> sc: sc0 already exists; skipping it >> vga: vga0 already exists; skipping it >> isa_probe_children: disabling PnP devices >> isa_probe_children: probing non-PnP devices >> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 >> pmtimer0 on isa0 >> adv0: not probed (disabled) >> aha0: not probed (disabled) >> aic0: not probed (disabled) >> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 >> psm0: current command byte:0065 >> psm0: failed to reset the aux device. >> bt0: not probed (disabled) >> cs0: not probed (disabled) >> ed0: not probed (disabled) >> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port >> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> fe0: not probed (disabled) >> ie0: not probed (disabled) >> le0: not probed (disabled) >> lnc0: not probed (disabled) >> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 >> pcic1: not probed (disabled) >> ppc0: parallel port found at 0x378 >> ppc0: using extended I/O port range >> ppc0: ECP SPP SPP >> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode >> ppc0: FIFO with 16/16/8 bytes threshold >> ppbus0: <Parallel port bus> on ppc0 >> plip0: <PLIP network interface> on ppbus0 >> plip0: bpf attached >> lpt0: <Printer> on ppbus0 >> lpt0: Interrupt-driven port >> ppi0: <Parallel I/O> on ppbus0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sc0: fb0, terminal emulator: sc (syscons terminal) >> sio0: irq maps: 0xc0c1 0xc0d1 0xc0c1 0xc0c1 >> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >> sio0: type 16550A >> sio1: irq maps: 0xc0c1 0xc0c9 0xc0c1 0xc0c1 >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 >> sio1: type 16550A >> sio2: not probed (disabled) >> sio3: not probed (disabled) >> sn0: not probed (disabled) >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >> isa0 >> fb0: vga0, vga, type:VGA (5), flags:0x7007f >> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 >> fb0: init mode:24, bios mode:3, current mode:24 >> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k >> VGA parameters upon power-up >> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 >> bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 >> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >> VGA parameters in BIOS for mode 24 >> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 >> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 >> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >> EGA/VGA parameters to be used for mode 24 >> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 >> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 >> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >> vt0: not probed (disabled) >> isa_probe_children: probing PnP devices >> adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is >> 0x100. Failing probe. >> adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is >> 0x100. Failing probe. >> adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is >> 0x100. Failing probe. >> unknown: <PNP0303> can't assign resources (port) >> unknown: <PNP0303> at port 0x60 on isa0 >> adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is >> 0x100. Failing probe. >> unknown: <PNP0800> failed to probe at port 0x61 on isa0 >> adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is >> 0x100. Failing probe. >> adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is >> 0x330. Failing probe. >> adv1: Invalid baseport of 0x2e specified. Nearest valid baseport is >> 0x100. Failing probe. >> unknown: <PNP0501> can't assign resources (port) >> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 >> unknown: <PNP0501> can't assign resources (port) >> unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 >> unknown: <PNP0401> can't assign resources (port) >> unknown: <PNP0401> at port 0x378-0x37b on isa0 >> unknown: <PNP0700> can't assign resources (port) >> unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 >> Device configuration finished. >> procfs registered >> Timecounter "TSC" frequency 2800121436 Hz quality -100 >> Timecounters tick every 10.000 msec >> lo0: bpf attached >> ata0-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin >> ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin >> ata0-master: setting PIO4 on ServerWorks CSB6 chip >> ata0-master: DMA limited to UDMA33, non-ATA66 cable or device >> ata0-master: setting UDMA33 on ServerWorks CSB6 chip >> ata0-slave: setting PIO4 on ServerWorks CSB6 chip >> ata0-slave: setting UDMA100 on ServerWorks CSB6 chip >> GEOM: create disk ad0 dp=0xcb0c4e60 >> ad0: <Maxtor 6Y080L0/YAR41BW0> ATA-7 disk at ata0-master >> ad0: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B >> ad0: 16 secs/int, 1 depth queue, UDMA33 >> GEOM: new disk ad0 >> ar: FreeBSD check1 failed >> [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:73384857 >> [1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:73384920 >> l:86686740 >> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> GEOM: Configure ad0s1, start 32256 length 37573046784 end 37573079039 >> GEOM: Configure ad0s2, start 37573079040 length 44383610880 end >> 81956689919 >> GEOM: create disk ad1 dp=0xcb0c4b60 >> ad1: <Maxtor 6Y080L0/YAR41BW0> ATA-7 disk at ata0-slave >> ad1: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B >> ad1: 16 secs/int, 1 depth queue, UDMA100 >> ar: FreeBSD check1 failed >> GEOM: Configure ad0s1a, start 0 length 157286400 end 157286399 >> GEOM: Configure ad0s1b, start 157286400 length 2147483648 end 2304770047 >> GEOM: Configure ad0s1c, start 0 length 37573046784 end 37573046783 >> GEOM: Configure ad0s1d, start 2304770048 length 314572800 end 2619342847 >> GEOM: Configure ad0s1e, start 2619342848 length 4294967296 end >> 6914310143 >> GEOM: Configure ad0s1f, start 6914310144 length 5368709120 end >> 12283019263 >> GEOM: Configure ad0s1g, start 12283019264 length 7516192768 end >> 19799212031 >> GEOM: Configure ad0s1h, start 19799212032 length 17773834752 end >> 37573046783 >> ata1-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin >> ata1-master: setting PIO4 on ServerWorks CSB6 chip >> ata1-master: DMA limited to UDMA33, non-ATA66 cable or device >> ata1-master: setting UDMA33 on ServerWorks CSB6 chip >> GEOM: create disk ad2 dp=0xcb0c4a60 >> ad2: <Maxtor 6Y200P0/YAR41BW0> ATA-7 disk at ata1-master >> ad2: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B >> ad2: 16 secs/int, 1 depth queue, UDMA33 >> GEOM: Configure ad0s2c, start 0 length 44383610880 end 44383610879 >> GEOM: Configure ad0s2d, start 0 length 44383610880 end 44383610879 >> GEOM: new disk ad1 >> ar: FreeBSD check1 failed >> SMP: AP CPU #2 Launched! >> cpu2 AP: >> ID: 0x06000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff >> lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff >> SMP: AP CPU #1 Launched! >> cpu1 AP: >> ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff >> lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff >> SMP: AP CPU #3 Launched! >> cpu3 AP: >> ID: 0x07000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff >> lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff >> ioapic0: routing intpin 3 (IRQ 3) to cluster 0 >> ioapic0: routing intpin 4 (IRQ 4) to cluster 0 >> ioapic0: routing intpin 6 (IRQ 6) to cluster 0 >> ioapic0: routing intpin 7 (IRQ 7) to cluster 0 >> ioapic0: routing intpin 8 (IRQ 8) to cluster 0 >> ioapic0: routing intpin 13 (IRQ 13) to cluster 0 >> ioapic0: routing intpin 14 (IRQ 14) to cluster 0 >> ioapic0: routing intpin 15 (IRQ 15) to cluster 0 >> ioapic1: routing intpin 1 (IRQ 17) to cluster 0 >> ioapic1: routing intpin 10 (IRQ 26) to cluster 0 >> ioapic1: routing intpin 12 (IRQ 28) to cluster 0 >> GEOM: new disk ad2 >> [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/3/63 s:63 l:160071597 >> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> GEOM: Configure ad1s1, start 32256 length 81956657664 end 81956689919 >> [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:398283417 >> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 >> GEOM: Configure ad2s1, start 32256 length 203921109504 end 203921141759 >> GEOM: Configure ad1s1c, start 0 length 81956657664 end 81956657663 >> GEOM: Configure ad1s1d, start 0 length 2147483648 end 2147483647 >> GEOM: Configure ad1s1e, start 2147483648 length 10737418240 end >> 12884901887 >> GEOM: Configure ad2s1c, start 0 length 203921109504 end 203921109503 >> GEOM: Configure ad2s1d, start 0 length 5368709120 end 5368709119 >> GEOM: Configure ad2s1e, start 5368709120 length 2147483648 end >> 7516192767 >> Mounting root from ufs:/dev/ad0s1a >> start_init: trying /sbin/init >> em1: Link is up 100 Mbps Full Duplex >> Linux ELF exec handler installed >> pflog0: bpf attached >> pflog: $Name: VERSION_2_03 $ >> pfsync0: bpf attached >> pfsync: $Name: VERSION_2_03 $ >> in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled >> in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled >> pflog0: promiscuous mode enabled >> pf: $Name: VERSION_2_03 $ >> em1: Link is up 100 Mbps Full Duplex >> WARNING: /jailsystem/bulletservices was not properly dismounted >> WARNING: /jailsystem/raptor was not properly dismounted >> >> >> - >> Some oddities: >> >> adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is >> 0x100. Failing probe. >> unknown: status reg test failed ff >> disks: only 1 is UDMA 100, the others are UDMA33; Don't know if this >> could cause any trouble. >> >> No idea of what these are, but they could lead to something. >> >> mptable: >> >> =============================================================================== >> >> >> MPTable, version 2.0.15 >> >> ------------------------------------------------------------------------------- >> >> >> MP Floating Pointer Structure: >> >> location:BIOS >> physical address:0x000ff780 >> signature:'_MP_' >> length:16 bytes >> version:1.4 >> checksum:0xe3 >> mode:Virtual Wire >> >> ------------------------------------------------------------------------------- >> >> >> MP Config Table Header: >> >> physical address:0x000f0ea0 >> signature:'PCMP' >> base table length:324 >> version:1.4 >> checksum:0x87 >> OEM ID:'AMI ' >> Product ID:'GCHE ' >> OEM table pointer:0x00000000 >> OEM table size:0 >> entry count:29 >> local APIC address:0xfee00000 >> extended table length:124 >> extended table checksum:17 >> >> ------------------------------------------------------------------------------- >> >> >> MP Config Base Table Entries: >> >> -- >> Processors:APIC IDVersionStateFamilyModelStepFlags >> 0 0x14 BSP, usable 15 2 5 0xbfebfbff >> 1 0x14 AP, usable 15 2 5 0xbfebfbff >> 6 0x14 AP, usable 15 2 5 0xbfebfbff >> 7 0x14 AP, usable 15 2 5 0xbfebfbff >> -- >> Bus:Bus IDType >> 0 PCI 1 ISA -- >> I/O APICs:APIC IDVersionStateAddress >> 8 0x11 usable 0xfec00000 >> 9 0x11 usable 0xfec01000 >> 10 0x11 usable 0xfec02000 >> 11 0x11 usable 0xfec03000 >> -- >> I/O Ints:TypePolarity TriggerBus ID IRQAPIC IDPIN# >> INTactive-lo level 011:A 9 13 >> INTactive-lo level 015:A 9 1 >> INTactive-lo level 0 9:A 9 10 >> INTactive-lo level 0 8:A 9 12 >> ExtINTactive-hi edge 1 0 8 0 >> INTactive-hi edge 1 1 8 1 >> INTactive-hi edge 1 0 8 2 >> INTactive-hi edge 1 3 8 3 >> INTactive-hi edge 1 4 8 4 >> INTactive-hi edge 1 5 8 5 >> INTactive-hi edge 1 6 8 6 >> INTactive-hi edge 1 7 8 7 >> INTactive-hi edge 1 8 8 8 >> INTactive-hi edge 1 12 8 12 >> INTactive-hi edge 1 13 8 13 >> INTactive-hi edge 1 14 8 14 >> INTactive-hi edge 1 15 8 15 >> -- >> Local Ints:TypePolarity TriggerBus ID IRQAPIC IDPIN# >> ExtINTactive-hi edge 1 0 255 0 >> NMIactive-hi edge 0 0:A 255 1 >> >> ------------------------------------------------------------------------------- >> >> >> MP Config Extended Table Entries: >> >> -- >> System Address Space >> bus ID: 0 address type: I/O address >> address base: 0xd000 >> address range: 0x2000 >> -- >> System Address Space >> bus ID: 0 address type: I/O address >> address base: 0x0 >> address range: 0x100 >> -- >> System Address Space >> bus ID: 0 address type: memory address >> address base: 0xa0000 >> address range: 0x20000 >> -- >> System Address Space >> bus ID: 0 address type: memory address >> address base: 0xfcb00000 >> address range: 0x2100000 >> -- >> System Address Space >> bus ID: 0 address type: prefetch address >> address base: 0xfca00000 >> address range: 0x100000 >> -- >> Bus Heirarchy >> bus ID: 1 bus info: 0x01 parent bus ID: 0 >> -- >> Compatibility Bus Address >> bus ID: 0 address modifier: add >> predefined range: 0x00000000 >> -- >> Compatibility Bus Address >> bus ID: 0 address modifier: add >> predefined range: 0x00000001 >> >> =============================================================================== >> >> >> >> pciconf -lv: >> >> hostb0@pci0:0:0:class=0x060000 card=0x00000000 chip=0x00171166 >> rev=0x32 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> device = 'CMIC-SL' >> class = bridge >> subclass = HOST-PCI >> hostb1@pci0:0:1:class=0x060000 card=0x00000000 chip=0x00171166 >> rev=0x00 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> device = 'CMIC-SL' >> class = bridge >> subclass = HOST-PCI >> em0@pci0:8:0:class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02 >> hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82544XT PRO/1000 MT Gigabit Ethernet Controller' >> class = network >> subclass = ethernet >> em1@pci0:9:0:class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02 >> hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82544XT PRO/1000 MT Gigabit Ethernet Controller' >> class = network >> subclass = ethernet >> none0@pci0:11:0:class=0x030000 card=0x00081002 chip=0x47521002 >> rev=0x27 hdr=0x00 >> vendor = 'ATI Technologies' >> device = 'Rage XL PCI' >> class = display >> subclass = VGA >> hostb2@pci0:15:0:class=0x060000 card=0x415515d9 chip=0x02031166 >> rev=0xa0 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> class = bridge >> subclass = HOST-PCI >> atapci0@pci0:15:1:class=0x01018a card=0x021211d9 chip=0x02131166 >> rev=0xa0 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> class = mass storage >> subclass = ATA >> ohci0@pci0:15:2:class=0x0c0310 card=0x415515d9 chip=0x02211166 >> rev=0x05 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> class = serial bus >> subclass = USB >> isab0@pci0:15:3:class=0x060100 card=0x415515d9 chip=0x02271166 >> rev=0x00 hdr=0x00 >> vendor = 'ServerWorks (Was: Reliance Computer Corp)' >> class = bridge >> subclass = PCI-ISA >> >> >> And finally, the hardware list as given by the datacenter: >> >> Motherboard >> SuperMicro X5DEI-GG >> >> Memory >> Apacer DDR 1024MB PC266 ECC+REG >> >> CDrom >> SuperMicro CDM-TEAC-32Black 32X Slimline >> >> Heatsink >> SuperMicro Heatsink SNK-0039 >> >> Proc >> 2 Intel S604 Xeon P4 2.8 512kb 533FSB Box Hdd >> Maxtor 080Gb U133 7200rpm 2MB 6Y080L0 >> Maxtor 080Gb U133 7200rpm 2MB 6Y080L0 >> Maxtor 200Gb U133 7200rpm 8MB 6Y200P0 >> >> >> ------- >> >> >> I have apm disabled (doesn't work with this board) >> >> My kernel has some custom options: >> options QUOTA >> options RANDOM_IP_ID >> options SC_DISABLE_REBOOT >> options IPSTEALTH >> options ADAPTIVE_MUTEXES >> >> And it is a SMP kernel (as seen by the dmesg). >> >> A couple of things changed until the server started dying daily, I've >> tried to revert them all but nothing seemed to be the cause: >> >> ad2 (200G) - It wasn't present when I got the server, and problems >> started roughly after adding the disk. I asked the datacenter to >> remove it, it worked for like 8 hours and died as usual. >> >> jails (@ad1,ad2) - I thought it could be a problem writing to >> multiple disks at once, so I let it run without any jails. Lasted 30 >> minutes that time. >> >> High loads - I had seti@home running (4 processes) and the server was >> always loaded. I thought the panic (which I still don't have, the >> message) was caused by high loads, to test this i disabled seti and >> let the server idle. Around 8h again, then died. Recently I loaded >> the hell out of it with seti @ -15 prio, portsdb -Uu and compiling >> stuff, got a steady 50 load and it didn't die (until half hour later, >> when load was around 25.. but if it held the 50 load for 1h or so, >> I'm assuming high loads aren't the problem) >> >> pf - packet filter. I had to reboot the server in order to enable the >> pf firewall, I had no problems until I started using it. But i'm >> doubting a firewall would be the cause for the server to die.. So I >> didn't try running the server without it yet.. Anyone had problems >> with this because of PF ? I don't think so. >> >> sysctl's - I made a lot of optimizations on the sysctls to handle the >> large volume of file desc. & sockets I was expecting. About 15 >> minutes ago, I commented ALL of the stuff I changed out and rebooted >> the server. >> >> >> >> >> As a final note, atm only named, postfix, courier imap, apache, >> setiathome and sshd are running on the system (+2 jails). >> >> Any suggestions as of what is causing the server to stop daily? >> >> >> Many thanks if you got this far reading this :-) >> >> Regards, >> >> Hugo >> >> >> >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?411BC279.8050500>