Date: Fri, 19 Dec 2003 00:17:47 -0500 From: "" <mmartin@cyberstreet.com> To: questions@freebsd.org Subject: Palm Tungsten T3 and pilot-link Message-ID: <76ea73adddb044eaae5f8a3bee4ffa5d.mmartin@cyberstreet.com>
next in thread | raw e-mail | index | archive | help
I'm attempting to use a TT3 with Pilot-link on FreeBSD=2E
I can install and restore just fine, but when I try to do a backup I get this error=
:
Dec 18 12:09:40 VLAC /kernel: usb0: host controller process error
Dec 18 12:09:40 VLAC /kernel: usb0: host controller halted
If I change UVISORIBUFSIZE to anything above 64, it simply deadlocks, which it seems was the reson it was changed to 64=
=2E
It also seems this sometimes happened before, and was fixed in FreeBSD 3=2E2=
=2E
It may be of worth to note that my CPU is a 800mhz Cyrix=2E
I havn't the slightest clue what to do about this=2E My uname -a and dmesg follows=
=2E
FreeBSD VLAC=2Enodomain=2Enet 4=2E9-STABLE FreeBSD 4=2E9-STABLE #0: Thu Dec 18 14:28:17 EST 2003 root@VLAC=2Enodomain=2Enet:/usr/obj/usr/src/sys/VLAC i38=
6
Copyright (c) 1992-2003 The FreeBSD Project=2E
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California=2E All rights reserved=2E
FreeBSD 4=2E9-STABLE #0: Thu Dec 18 14:28:17 EST 2003
root@VLAC=2Enodomain=2Enet:/usr/obj/usr/src/sys/VLAC
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 800030985 Hz
CPU: VIA C3 Samuel 2 (800=2E03-MHz 686-class CPU)
Origin =3D "CentaurHauls" Id =3D 0x678 Stepping =3D 8
Features=3D0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory =3D 259981312 (253888K bytes)
avail memory =3D 249987072 (244128K bytes)
Preloaded elf kernel "kernel" at 0xc02f4000=2E
md0: Malloc disk
Using $PIR table, 2 entries at 0xc00fdd50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0=2E0 on pci=
0
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3D8601)> at device 1=2E0 on pci=
0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8500 VGA-compatible display device> at 0=2E0 irq 11
isab0: <PCI to ISA bridge (vendor=3D1106 device=3D8231)> at device 17=2E0 on pci=
0
isa0: <ISA bus> on isab0
atapci0: <VIA 8231 ATA100 controller> port 0xd000-0xd00f at device 17=2E1 on pci=
0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 17=2E2 on pci=
0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1=2E0
uhub0: VIA UHCI root hub, class 9/0, rev 1=2E00/1=2E00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 17=2E3 on pci=
0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1=2E0
uhub1: VIA UHCI root hub, class 9/0, rev 1=2E00/1=2E00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip0: <PCI to Other bridge (vendor=3D1106 device=3D8235)> at device 17=2E4 on pci=
0
chip1: <VIA 82C686 AC97 Audio> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 10 at device 17=2E5 on pci=
0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xe7000000-0xe70000ff irq 11 at device 18=2E0 on pci=
0
vr0: Ethernet address: 00:06:93:f0:02:3b
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802=2E3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0=20
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode =20
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad2: 38166MB <WDC WD400BB-00CAA0> [77545/16/63] at ata1-master UDMA100
acd0: CDROM <QSI CD-ROM SCR-242> at ata0-master PIO4
Mounting root from ufs:/dev/ad2s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?76ea73adddb044eaae5f8a3bee4ffa5d.mmartin>