Date: Thu, 21 Oct 2010 09:56:33 GMT From: Damian <damkol@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/151616: FreeBSD 8 panic on boot. Message-ID: <201010210956.o9L9uXI8019988@www.freebsd.org> Resent-Message-ID: <201010211000.o9LA0Nfn035633@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 151616 >Category: i386 >Synopsis: FreeBSD 8 panic on boot. >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Oct 21 10:00:22 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Damian >Release: FreeBSD 7.3 >Organization: >Environment: FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010 >Description: FreeBSD 7.3-RELEASE (livefs) works fine on my Compaq DL380 testbox. FreeBSD 8.0-RELEASE, FreeBSD 8.1-RELEASE, FreeBSD 8.1-STABLE (201010), FreeBSD 9.0-CURRENT (201010) panic on boot with: panic: Couldn't find an APIC vector for IRQ 9 When i change APIC table from 'Full table APIC; to 'Disable' in bios, then FreeBSD panic with the same reason, but IRQ 13. ACPI/no ACPI nothing change. Here is dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc12c7000. Preloaded mfs_root "/boot/mfsroot" at 0xc12c7188. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc12c71cc. Calibrating clock(s) ... i8254 clock: 1193160 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1258219877 Hz CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1258.22-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Instruction TLB: 4 KB pages, 4-way set associative, 32 entries Instruction TLB: 4 MB pages, fully associative, 2 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries 2nd-level cache: 512 KB, 8-way set associative, 32 byte line size 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size real memory = 1610596352 (1535 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001425000 - 0x000000005e4abfff, 1560834048 bytes (381063 pages) avail memory = 1560190976 (1487 MB) Table 'FACP' at 0x5fffc040 Table 'APIC' at 0x5fffc100 APIC: Found table at 0x5fffc100 MP Configuration Table version 1.4 found at 0xc00f3012 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: disabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: enabled SMP: Added CPU 3 (AP) ACPI APIC Table: <COMPAQ 00000083> bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x94 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 3 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ACPI: RSDP @ 0x0xf4f70/0x0014 (v 0 COMPAQ) ACPI: RSDT @ 0x0x5fffc000/0x0030 (v 1 COMPAQ P24 0x00000002 \M-R\^D 0x0000162E) ACPI: FACP @ 0x0x5fffc040/0x0074 (v 1 COMPAQ P24 0x00000002 \M-R\^D 0x0000162E) ACPI: DSDT @ 0x0x5fffc200/0x26E3 (v 1 COMPAQ DSDT 0x00000001 MSFT 0x0100000B) ACPI: FACS @ 0x0x5fffc0c0/0x0040 ACPI: APIC @ 0x0x5fffc100/0x0074 (v 1 COMPAQ 00000083 0x00000002 0x00000000) ACPI: SPCR @ 0x0x5fffc180/0x0050 (v 1 COMPAQ SPCRRBSU 0x00000001 \M-R\^D 0x0000162E) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 2, Interrupt 16 at 0xfec01000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic0 <Version 1.1> irqs 0-15 on motherboard cpu0 BSP: ID: 0x03000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010400 wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51) npx0: INT 16 interface acpi0: <COMPAQ P24> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc4c9c000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 1 AcpiOsDerivePciId: \\_SB_.PCI0.CFG1.MEM0 -> bus 0 dev 0 func 2 AcpiOsDerivePciId: \\_SB_.PCI0.CFG2.MEM0 -> bus 0 dev 0 func 3 ACPI timer: 1/1 0/15 1/1 1/1 1/1 0/16777168 0/16777189 1/1 1/1 0/16777200 -> 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 15 Validation 0 15 N 0 15 After Disable 0 255 N 0 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 15 Validation 0 255 N 0 15 After Disable 0 255 N 0 15 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0008, revid=0x23 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0008, revid=0x01 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x01 domain=0, bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0006, revid=0x01 domain=0, bus=0, slot=0, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x0e11, dev=0xb178, revid=0x01 domain=0, bus=0, slot=1, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xf7ec0000, size 18, enabled map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled map[1c]: type Prefetchable Memory, range 64, base 0xf5ef0000, size 14, enabled pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x1229, revid=0x08 domain=0, bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf7eb0000, size 12, enabled map[14]: type I/O Port, range 32, base 0x2400, size 6, enabled map[18]: type Memory, range 32, base 0xf7d00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x1229, revid=0x08 domain=0, bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf7cf0000, size 12, enabled map[14]: type I/O Port, range 32, base 0x2440, size 6, enabled map[18]: type Memory, range 32, base 0xf7b00000, size 20, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 20 found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf6000000, size 24, enabled map[14]: type I/O Port, range 32, base 0x2800, size 8, enabled map[18]: type Memory, range 32, base 0xf5ff0000, size 12, enabled found-> vendor=0x0e11, dev=0xa0f0, revid=0x00 domain=0, bus=0, slot=6, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled map[14]: type Memory, range 32, base 0xf5fe0000, size 8, enabled pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 21 found-> vendor=0x1166, dev=0x0200, revid=0x51 domain=0, bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type I/O Port, range 32, base 0, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0x2c00, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 domain=0, bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf5fd0000, size 12, enabled pcib0: matched entry for 0.15.INTA pcib0: slot 15 INTA hardwired to IRQ 22 ciss0: <Compaq Smart Array 5i> port 0x2000-0x20ff mem 0xf7ec0000-0xf7efffff,0xf5ef0000-0xf5ef3fff irq 16 at device 1.0 on pci0 ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf7ec0000 ioapic1: routing intpin 0 (PCI IRQ 16) to vector 49 ciss0: [MPSAFE] ciss0: [ITHREAD] ciss0: using 256 of 1024 available commands ciss0: firmware 2.62 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0x6<simple,performant> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x3000003f ciss0: 6 physical devices ciss0: 5 logical drives ciss0: logical drive (b0t0): RAID 0, 16896MB online ciss0: logical drive (b0t1): RAID 0, 16896MB online ciss0: logical drive (b0t2): RAID 0, 139776MB online ciss0: logical drive (b0t3): RAID 0, 139776MB online ciss0: logical drive (b0t4): RAID 0, 34304MB online fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem 0xf7eb0000-0xf7eb0fff,0xf7d00000-0xf7dfffff irq 18 at device 2.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7eb0000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 0e11 b134 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:08:02:e6:7a:1d ioapic1: routing intpin 2 (PCI IRQ 18) to vector 50 fxp0: [MPSAFE] fxp0: [ITHREAD] fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2440-0x247f mem 0xf7cf0000-0xf7cf0fff,0xf7b00000-0xf7bfffff irq 20 at device 4.0 on pci0 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7cf0000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 0e11 b134 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> PHY 1 on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:08:02:e6:7a:1c ioapic1: routing intpin 4 (PCI IRQ 20) to vector 51 fxp1: [MPSAFE] fxp1: [ITHREAD] vgapci0: <VGA-compatible display> port 0x2800-0x28ff mem 0xf6000000-0xf6ffffff,0xf5ff0000-0xf5ff0fff at device 5.0 on pci0 pci0: <base peripheral> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2c00-0x2c0f at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2c00 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53 ata1: [MPSAFE] ata1: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xf5fd0000-0xf5fd0fff irq 22 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf5fd0000 ohci0: (New OHCI DeviceId=0x02201166) ioapic1: routing intpin 6 (PCI IRQ 22) to vector 54 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI Host-PCI bridge> on acpi0 pci7: <ACPI PCI bus> on pcib2 pci7: domain=0, physical bus=7 found-> vendor=0x0e11, dev=0xa0f7, revid=0x12 domain=0, bus=7, slot=7, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf7ff0000, size 8, enabled pcib2: matched entry for 7.7.INTA pcib2: slot 7 INTA hardwired to IRQ 23 pci7: <base peripheral, PCI hot-plug controller> at device 7.0 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode unknown: status reg test failed ff unknown: status reg test failed ff unknown: Failed Intstat Reg Test unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4001 0x4001 0x4001 0x4001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 101661 -> 100000 procfs registered lapic: Divisor 2, Frequency 66222107 hz Timecounter "TSC" frequency 1258219877 Hz quality 800 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0e2208c ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ROSB4 chip acd0: <CD-224E/A.8D> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc (probe0:ciss0:0:0:0): Down reving Protocol Version from 2 to 0? (probe1:ciss0:0:1:0): Down reving Protocol Version from 2 to 0? (probe2:ciss0:0:2:0): Down reving Protocol Version from 2 to 0? (probe3:ciss0:0:3:0): Down reving Protocol Version from 2 to 0? (probe4:ciss0:0:4:0): Down reving Protocol Version from 2 to 0? da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: Command Queueing Enabled da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C) da1 at ciss0 bus 0 target 1 lun 0 da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da1: 135.168MB/s transfers da1: Command Queueing Enabled da1: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C) da2 at ciss0 bus 0 target 2 lun 0 da2: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da2: 135.168MB/s transfers da2: Command Queueing Enabled da2: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C) da3 at ciss0 bus 0 target 3 lun 0 da3: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da3: 135.168MB/s transfers da3: Command Queueing Enabled da3: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C) da4 at ciss0 bus 0 target 4 lun 0 da4: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da4: 135.168MB/s transfers da4: Command Queueing Enabled da4: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) pass0 at ciss0 bus 0 target 0 lun 0 pass0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass0: 135.168MB/s transfers pass0: Command Queueing Enabled pass1 at ciss0 bus 0 target 1 lun 0 pass1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass1: 135.168MB/s transfers pass1: Command Queueing Enabled pass2 at ciss0 bus 0 target 2 lun 0 pass2: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass2: 135.168MB/s transfers pass2: Command Queueing Enabled pass3 at ciss0 bus 0 target 3 lun 0 pass3: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass3: 135.168MB/s transfers pass3: Command Queueing Enabled pass4 at ciss0 bus 0 target 4 lun 0 pass4: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass4: 135.168MB/s transfers pass4: Command Queueing Enabled ATA PseudoRAID loaded GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 GEOM: new disk da4 Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall >How-To-Repeat: Panic on boot everytime with FreeBSD 8 and 9. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010210956.o9L9uXI8019988>