Date: Mon, 23 Oct 2006 17:14:13 +0100 From: "Alexandre Vieira" <nullpt@gmail.com> To: "Gavin Atkinson" <gavin.atkinson@ury.york.ac.uk>, freebsd-questions@freebsd.org, freebsd-sparc64@freebsd.org Subject: Re: SunFire V210/V240 (UltraSparc IIIi) and FreeBSD Message-ID: <755cb9fc0610230914h16a639f5l6b491b0da9798945@mail.gmail.com> In-Reply-To: <1161618250.13630.40.camel@buffy.york.ac.uk> References: <755cb9fc0610230745h3e3aa0d8y920d07e90d43eee6@mail.gmail.com> <1161618250.13630.40.camel@buffy.york.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/23/06, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> wrote:
>
> On Mon, 2006-10-23 at 15:45 +0100, Alexandre Vieira wrote:
> > Hello folks,
> >
> > Reading trough 6.1 hardware notes for the sparc64 port I can see that
> any
> > Ultrasparc III system is not supported. I have a bunch of these laying
> > around and would like to know if there is any usability in these systems
> > with freebsd. I've seen some reports of people bashing these V210/V240
> and
> > would like to know if anyone tried to do anything with this.
>
> There's an effort to get a Host-PCI bridge (Schizo/Tomatillo) driver
> working, but it's in very early days and may not ever fully materialise
> as there exists no documentation on the chipset so all that is available
> are Linux and OpenBSD driver source code, neither of which is
> particularly well documented or easy to follow.
>
> I currently have no spare test hardware, but hope to start hacking away
> again at some point in the future.
>
> But, as I say, don't get your hopes up.
>
> Gavin
>
Hello,
I'm unable to boot 6.2-BETA2 on a SunFire V210. It stalls in the start of
kernel boot:
ok boot cdrom
SC Alert: Host System has Reset
Sun Fire V210, No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.8.2, 1024 MB memory installed, Serial #54938997.
Ethernet address 0:3:ba:46:4d:75, Host ID: 83464d75.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
>> FreeBSD/sparc64 boot block
Boot path: /pci@1e,600000/ide@d/cdrom@0,0:f
Boot loader: /boot/loader
Consoles: Open Firmware console
Boot path set to /pci@1e,600000/ide@d/cdrom@0,0:a
FreeBSD/sparc64 bootstrap loader, Revision 1.0
(root@s-dallas.cse.buffalo.edu, Mon Oct 2 04:28:55 UTC 2006)
bootpath="/pci@1e,600000/ide@d/cdrom@0,0:a"
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x52e108+0x5c5d8 syms=[0x8+0x6c438+0x8+0x59f6c]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 4 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot kernel -v
/boot/kernel/kernel data=0x52e108+0x5c5d8 syms=[0x8+0x6c438+0x8+0x59f6c]
nothing to autoload yet.
jumping to kernel entry at 0xc0060000.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-BETA2 #0: Mon Oct 2 13:42:46 UTC 2006
root@s-dallas.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a54000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0a541a0.
Timecounter "tick" frequency 1002000000 Hz quality 1000
real memory = 1073741824 (1024 MB)
avail memory = 898465792 (856 MB)
machine: SUNW,Sun-Fire-V210
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1002.00 MHz CPU)
mask=0x24 maxtl=5 maxwin=7
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
null: <null device, zero device>
openfirm: <Open Firmware control device>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413,
REGOPS_FUNC)
nexus0: <Open Firmware Nexus device>
nexus0: <memory-controller>, type memory-controller (no driver attached)
nexus0: <pci>, type pci (no driver attached)
nexus0: <pci>, type pci (no driver attached)
nexus0: <pci>, type pci (no driver attached)
nexus0: <pci>, type pci (no driver attached)
syscons0: no video adapter found.
nexus0: <syscons>, type (unknown) (no driver attached)
procfs registered
initalizing intr_countp
Timecounters tick every 1.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc0650a98
Trying to mount root from ufs:/dev/md0
warning: no time-of-day clock registered, system time will not be set
accurately
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
At this point the machine simply resets itself.
sc> showplatform -v
Domain Status
------ ------
mct5-LTE OS Reset
Device Version
------ -------
IMAX0 1.4
IMAX1 1.4
ADM1026 4.4
sc> showenvironment
=============== Environmental Status ===============
--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft
HighHard
--------------------------------------------------------------------------------
MB.P0.T_CORE OK 46 -- -- -- 110 115
118
MB.T_ENC OK 16 -6 -3 5 40 48
51
--------------------------------------
Front Status Panel:
--------------------------------------
Keyswitch position: Normal
--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
MB.LOCATE MB.SERVICE MB.ACT
--------------------------------------------------------
OFF OFF OFF
--------------------------------------------
System Disks:
--------------------------------------------
Disk Status Service OK-to-Remove
--------------------------------------------
HDD0 OK OFF OFF
HDD1 OK OFF OFF
----------------------------------------------------------
Fans (Speeds Revolution Per Minute):
----------------------------------------------------------
Fan Status Speed Low
----------------------------------------------------------
F0.RS OK 9507 1000
F1.RS OK 9440 1000
F2.RS OK 9440 1000
F3.RS OK 9712 1000
MB.P0.F0.RS OK 17307 2000
MB.P0.F1.RS OK 16875 2000
--------------------------------------------------------------------------------
Voltage sensors (in Volts):
--------------------------------------------------------------------------------
Sensor Status Voltage LowSoft LowWarn HighWarn HighSoft
--------------------------------------------------------------------------------
MB.P0.V_CORE OK 1.45 -- 1.26 1.54 --
MB.P1.V_CORE OK 1.41 -- 1.26 1.54 --
MB.V_VTT OK 1.29 -- 1.17 1.43 --
MB.V_GBE_+2V5 OK 2.49 -- 2.25 2.75 --
MB.V_GBE_CORE OK 1.19 -- 1.08 1.32 --
MB.V_VCCTM OK 2.53 -- 2.25 2.75 --
MB.V_+2V5 OK 2.60 -- 2.34 2.86 --
MB.V_+1V5 OK 1.51 -- 1.35 1.65 --
MB.BAT.V_BAT OK 2.95 -- 2.70 -- --
--------------------------------------------
Power Supply Indicators:
--------------------------------------------
Supply Active Service OK-to-Remove
--------------------------------------------
PS0 ON OFF OFF
------------------------------------------------------------------------------
Power Supplies:
------------------------------------------------------------------------------
Supply Status Underspeed Overtemp Overvolt Undervolt
Overcurrent
------------------------------------------------------------------------------
PS0 OK OFF OFF OFF OFF OFF
----------------------
Current sensors:
----------------------
Sensor Status
----------------------
MB.FF_SCSI OK
sc>
Let me know if there is anything else I can try.
Regards,
--
Alexandre Vieira - nullpt@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?755cb9fc0610230914h16a639f5l6b491b0da9798945>