From owner-freebsd-questions Mon Apr 8 12:09:57 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id MAA19020 for questions-outgoing; Mon, 8 Apr 1996 12:09:57 -0700 (PDT) Received: from ennui.ops.best.com (ennui.ops.best.com [205.149.163.86]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id MAA19007 for ; Mon, 8 Apr 1996 12:09:54 -0700 (PDT) Received: (from rone@localhost) by ennui.ops.best.com (8.6.12/8.6.12) id MAA12258 for questions@freebsd.org; Mon, 8 Apr 1996 12:12:21 -0700 Message-Id: <199604081912.MAA12258@ennui.ops.best.com> Subject: several questions To: questions@freebsd.org Date: Mon, 8 Apr 1996 12:12:20 -0700 (PDT) From: "Ron Echeverri" X-Mailer: ELM [version 2.4 PL25 ME8b] Content-Type: text Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have 2.1-RELEASE up and running... - Netscape 2.0 sometimes takes up more memory than my X server... Does anyone have a nice "stable" version of Netscape 1.x out there? Or could someone recommend an alternative graphical web browser that isn't bloated up the wazoo with Java, mail, and news clients i neither use nor want? - If i telnet to port 25 locally, it just hangs there for a while. I hit enter and, after a while, it comes back with the "220-ennui.ops.best.com Sendmail 8.6.12/8.6.12 ready at Mon, 8 Apr 1996 11:48:09 -0700" message and says "500 command unrecognized", and i get a message in /var/log/messages similar to Mar 14 14:23:45 ennui sendmail[19873]: NOQUEUE: SYSERR: putoutmsg (ennui.ops.best.com): error on output channel sending "220 ESMTP spoken here": Invalid argument This doesn't happen if i go to 25 from another host. Is it my telnet? - One line: "Mar 16 03:30:01 ennui inetd[88]: /usr/local/sbin/identd: exit status 0x100". I also get lots of "Mar 16 04:12:37 ennui last message repeated 578 times". I've disabled identd in my /etc/inetd.conf for now, #ident stream tcp wait root /usr/local/sbin/identd identd -w -t120 but does someone know what i broke? - I have a new Seagate 1.08G IDE hard drive which i've hooked up to my IDE controller as wd1. I set it up in my CMOS as LBA, by doing cylinders/4 and 4*heads (the drive says 2100 cylinders, 16 heads, and 63 sectors/track; the CMOS settings are 525 cylinders and 64 heads). I've run fdisk -i -u /dev/rwd1 and set it to both 2100/16 and 525/64 and used the whole disk in the first partition. I then do disklabel -e /dev/rwd1 and i get disklabel: ioctl DIOCWDINFO: Operation not supported by device What should i do? Thanks a lot! rone -- Ron Echeverri Best Internet Technical Support rone@best.net ------------------------------------------------------------------------------- Actually, the success of Perl has nothing to do with how good it is. It's really those subliminal messages I put into rn 8 years ago. - Larry Wall