Date: 18 Dec 98 02:46:24 America/Fort_Wayne From: Stephen Palmer <slpalmer@netscape.net> To: <freebsd-questions@FreeBSD.ORG> Subject: Request fo help with Zip Drive on vpo0 in -current Message-ID: <19981218024624.23042.qmail@www0l.netaddress.usa.net>
next in thread | raw e-mail | index | archive | help
Can someone offer assistance in getting a Parallel Port Zip Drive
working under FreeBSD 3.0-current? I've searched the mailing lists
and LINT, and added what I thought were the correct options.
As you can read in my dmesg output below, my ppbus and vpo0 do
get detected, but da0 and scbus do not. A gentle nudge in the right
direction would be most graciously appreciated!
Stephen L. Palmer
slpalmer@netscape.net
KERNEL CONFIG FILE
machine "i386"
cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident MIDEARTH
maxusers 32
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
controller dpt0
device sc0 at isa? port IO_KBD conflicts tty irq 1
device npx0 at isa? port IO_NPX irq 13
device apm0 at isa? disable flags 0x31 # Advanced Power Management
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 5
device sio2 at isa? disable port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
device psm0 at isa? port IO_KBD conflicts tty irq 12
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
options KTRACE #kernel tracing
options SYSVSHM
controller pnp0
device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0
controller smbus0
device smb0 at smbus?
controller iicbus0
controller iicbb0
device ic0 at iicbus?
device iic0 at iicbus?
device iicsmb0 at iicbus?
controller ppc0 at isa? port ? tty irq 7
controller ppbus0
controller vpo0 at ppbus?
controller scbus0 at vpo0
device da0
END KERNEL CONFIG FILE
OUTPUT FROM DMESG
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #5: Wed Dec 16 23:46:24 CST 1998
slpalmer@midearth.dyn.ml.org:/usr/src/sys/compile/MIDEARTH
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
config> quit
avail memory = 62722048 (61252K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
vga0: <VGA-compatible display device> rev 0x03 int a irq 10 on pci0.8.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x1b9e4f4c Comp ID: PNPb02f
[0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x1b9e4f4c) at 0x220-0x22f irq 9 drq 1 flags 0x17
on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 5 on isa
sio1: type 16550A
psm0 not found at 0x60
ppc: parallel port found at 0x378
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC36400L>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
wcd0: 4134KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
wdc1: unit 1 (atapi): <Memorex CRW-1622/ D3.7>, removable, dma, iordy
wcd1: 344/1034KB/sec, 1024KB cache, audio play, 128 volume levels, ejectable
tray
wcd1: no disc inside, unlocked, lock protected
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to wd0s2a
END DMESG OUTPUT
--- |
Stephen L. Palmer | Sprint Paranet
slpalmer@netscape.net \|/ slpalmer@sprintparanet.com
"There are thousands of intelligent species in the
Universe, and they all own cats." -Unknown
____________________________________________________________________
More than just email--Get your FREE Netscape WebMail account today at http://home.netscape.com/netcenter/mail
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981218024624.23042.qmail>