Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Oct 2005 14:57:11 +0200
From:      Marius Strobl <marius@alchemy.franken.de>
To:        Gheorghe Ardelean <ardelean@ww.uni-erlangen.de>
Cc:        freebsd-sparc64@freebsd.org
Subject:   Re: 6.0-BETA5 and Ultra 1 !?
Message-ID:  <20051025145711.C32605@newtrinity.zeist.de>
In-Reply-To: <Pine.LNX.4.33.0510191226240.10776-100000@servww6.ww.uni-erlangen.de>; from ardelean@ww.uni-erlangen.de on Wed, Oct 19, 2005 at 12:33:45PM %2B0200
References:  <20051019120151.Q32605@newtrinity.zeist.de> <Pine.LNX.4.33.0510191226240.10776-100000@servww6.ww.uni-erlangen.de>

next in thread | previous in thread | raw e-mail | index | archive | help

On Wed, Oct 19, 2005 at 12:33:45PM +0200, Gheorghe Ardelean wrote:
> 
> 
> On Wed, 19 Oct 2005, Marius Strobl wrote:
> 
> >
> > On Wed, Oct 19, 2005 at 03:55:56AM +0200, Gheorghe Ardelean wrote:
> > >
> > >
> > > Hi Marius,
> > >
> > > Thank you for your tip. It works now!
> > > Booting a new loader with "make LOADER_GZIP_SUPPORT=no" solved the
> > > problem. I can definitely boot from the onboard SCSI disc.
> > >
> > > What we need to make this work also with installation ISO?
> >
> > There's no simple way to modifiy an existing install ISO so it
> > will boot on an U1 and install a loader that is able to boot
> > from a disk attached to the on-board controller. It's proably
> > easier to build a custom install ISO with gzipfs disabled or
> > a patch with a proper workaround in the first place.
> > If you meant what it would take to get either of it into
> > the 6.0-R ISOs it's most likely too late; I don't think that
> > changes allowing U1 (which are not yet properly supported
> > anyway due to lack of drivers for the on-board NIC and CG6
> > cards) to boot would be accepted this late in the release
> > cycle.
> 
> I don't expect to see this in 6.0-R. Now that you provided a solution for
> this problem it's ok. I am satisfied with this, but I am thinking that in
> the future it would be nice to provide such an "out of the box" solution with
> the ISO.
> 

I just committed a workaround for this problem. I plan to MFC it
in one month so it should be part of 6.1 and onward releases.

Marius

-- 
This mail was scanned by AntiVir Milter.
This product is licensed for non-commercial use.
See www.antivir.de for details.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051025145711.C32605>