Date: Thu, 25 Oct 2001 06:53:02 -0700 From: Armando Cerna <armando@thefoodlist.com> To: David Powers <dnpowers@swbell.net> Cc: questions@freebsd.org Subject: Re: problem Message-ID: <200110251351.GAA14455@cedar.he.net> In-Reply-To: <001001c15d4a$fc7f78a0$0401a8c0@daveabit> References: <001001c15d4a$fc7f78a0$0401a8c0@daveabit>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 25 October 2001 04:48 am, David Powers wrote: > What other devices are in your box? Can you post an output of dmesg, it > sounds like you have an irq conflict somewhere. > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Armando Cerna > Sent: Wednesday, October 24, 2001 9:40 PM > To: freebsd-questions@FreeBSD.ORG > Subject: problem > > > I get this error when I try to record a file with "rec" I have a > soundblaster > live and it is compiled into the kernel with only device pcm... > > > pcm0: record interrupt timeout, channel dead > > > Any help would be great > > > Armando > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Here is a dmesg all I have in my system is the soundblaster live and a voodoo 3 1000 video card and a network card Thanks, Armando CPU: AMD Athlon(tm) processor (1200.05-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P AT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 201261056 (196544K bytes) avail memory = 192438272 (187928K bytes) Preloaded elf kernel "kernel" at 0xc035a000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdee0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0 pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 12 at device 8.0 on pci0 rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xea000000-0xea0000ff irq 11 at device 13.0 on pci0 rl0: Ethernet address: 00:50:ba:47:a8:0b miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 26059MB <Maxtor 92732U8> [52946/16/63] at ata0-master UDMA33 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata0-slave using PIO0 acd0: DVD-ROM <HITACHI DVD-ROM GD-5000> at ata1-master using PIO4 acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s1a /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200110251351.GAA14455>