Date: Fri, 31 Oct 2003 00:19:14 +0100 From: Jonas Sonntag <jonas.sonntag@jbhosting.de> To: freebsd-questions@freebsd.org Subject: vinum on atapi raid Message-ID: <3FA19C72.2050607@jbhosting.de>
next in thread | raw e-mail | index | archive | help
hi list
i'm trying to set up a concatenated vinum volume. i read chapter 13 in
the handbook and as so often i've found a nice how-to on
freebsddiary.org but somehow i'm stuck.
my /etc/vinum.conf file is like this:
drive a device /dev/ar1h
drive b device /dev/ar2h
volume stuff
plex org concat
sd length 117239m drive a
sd length 78528m drive b
disklabels:
# /dev/ar1c:
type: ESDI
disk: ar1s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 14945
sectors/unit: 240107427
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 240107427 0 unused 0 0 # (Cyl. 0 -
14945*)
h: 240107427 0 vinum # (Cyl. 0 -
14945*)
# /dev/ar2c:
type: ESDI
disk: ar2s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 10010
sectors/unit: 160826652
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 160826652 0 unused 0 0 # (Cyl. 0 -
10010*)
h: 160826652 0 vinum # (Cyl. 0 -
10010*)
fidsk also looks good:
/dev/ar1:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 240107427 (117239 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
/dev/ar2:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 160826652 (78528 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
now i seem to be missing something here.. when i do
vinum create -f /etc/vinum.conf
what i get is:
1: drive a device /dev/ar1h
** 1 Can't initialize drive a: Operation not supported by device
2: drive b device /dev/ar2h
** 2 Can't initialize drive b: Operation not supported by device
0 drives:
1 volumes:
V stuff State: down Plexes: 1 Size: 191 GB
1 plexes:
P stuff.p0 C State: faulty Subdisks: 2 Size: 191 GB
2 subdisks:
S stuff.p0.s0 State: crashed PO: 0 B Size: 114 GB
S stuff.p0.s1 State: crashed PO: 114 GB Size: 76 GB
messages says:
/kernel: vinum: stuff.p0.s0 is crashed
/kernel: vinum: stuff.p0 is faulty
/kernel: vinum: stuff.p0.s1 is crashed
i have 'obliterated' the volume, i have remade the devices i allways end
up with "Operation not supported by device".
something similar happens when i'm using the concat command to vinum:
vinum -> concat -v /dev/ar1h /dev/ar2h
volume vinum0
plex name vinum0.p0 org concat
drive vinumdrive0 device /dev/ar1h
Can't create drive vinumdrive0, device /dev/ar1h: Can't initialize drive
vinumdrive0
i have come across this post:
http://www.geocrawler.com/mail/msg.php3?msg_id=6949487&list=159
could that be the case with /dev/ar, too? i'm on 4.8-stable.
any hints how to go on would be great. please cc me, as i'm not on the list.
thanks and br
jonas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FA19C72.2050607>