Date: Mon, 24 Nov 2003 16:58:11 +0200 From: Maxim Mazurok <maxim@km.ua> To: freebsd-sparc@FreeBSD.ORG Subject: Ultra AXe motherboard and additional NIC Message-ID: <20031124145810.GZ36438@km.ua>
next in thread | raw e-mail | index | archive | help
i need strange again :))) i need small route-server (1U rack-mount form factor). for this i have UltraAXe motherboard. but i need more than one ethernet cards. and more, than two :) i 1U i can install onmy one PCI card width riser. i have 2 strange cards: 1. dual-port card width Intel 21143 chipset. 2. four-port card width Digital 21140A chipset. i recompile kernel width dc(4) driver and de(4) driver... reboot, and i see: === dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x100000-0x1003ff irq 16 at device 4.0 on pci3 dc0: Ethernet address: 00:00:1d:d1:06:82 miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff mem 0x102000-0x1023ff irq 16 at device 8.0 on pci3 dc1: Ethernet address: ff:ff:ff:ff:ff:ff miibus1: <MII bus> on dc1 dcphy1: <Intel 21143 NWAY media interface> on miibus1 dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto === === de0: <Digital 21140A Fast Ethernet> port 0x2000-0x207f mem 0x200000-0x20007f irq 24 at device 4.0 on pci4 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:00:bc:11:74:87 de1: <Digital 21140A Fast Ethernet> port 0x2080-0x20ff mem 0x202000-0x20207f irq 25 at device 5.0 on pci4 de1: 21140A [10-100Mb/s] pass 2.2 de1: address 00:00:bc:11:74:86 de2: <Digital 21140A Fast Ethernet> port 0x2100-0x217f mem 0x204000-0x20407f irq 26 at device 6.0 on pci4 de2: 21140A [10-100Mb/s] pass 2.2 de2: address 00:00:bc:11:74:85 de3: <Digital 21140A Fast Ethernet> port 0x2180-0x21ff mem 0x206000-0x20607f irq 27 at device 7.0 on pci4 de3: 21140A [10-100Mb/s] pass 2.2 de3: address 00:00:bc:11:74:84 === cards really worked. i tested on i386 platform. all ports i found in dmesg on my sparc64 and ifconfig. but... it's no worked. dc(4) problems: 1. if i insert patchcord to any ports - any lamps do not light. 2. strange MAC address on dc1 de(4) problems: 1. if i insert patchcord to any ports - link lamp is flashed. ~2 seconds on, ~1 second off. 2. on another server in this segment i not have ARP address. can anybody help me? P.S. sorry for my bad english. -- Maxim Mazurok (MMP2-RIPE)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031124145810.GZ36438>