Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 11 Sep 2005 12:34:25 -0400
From:      Sean <rsh.lists@comcast.net>
To:        "David S. Besade" <webmaster@machowto.com>
Cc:        freebsd-amd64@freebsd.org
Subject:   Re: Problems with Nacona Xeons
Message-ID:  <43245C91.1090904@comcast.net>
In-Reply-To: <BF49AB3E.1D52%webmaster@machowto.com>
References:  <BF49AB3E.1D52%webmaster@machowto.com>

next in thread | previous in thread | raw e-mail | index | archive | help
David S. Besade wrote:
> Hey Guys,
> 
> I have a Dual Xeon (With EM64T) system running FreeBSD 5.4 AMD64 - Release
> (with a -stable kernel). I can't get the kernel to see my second CPU. I have
> recompiled and retuned and done everything I could to get it to see the
> second CPU. The guys on IRC (##Freebsd on freenode) told me to post this to
> this list.
> 
> I do have the ACPI disabled as it doesn't work right yet. The Motherboard is
> a Tyan S5350 ( http://tyan.com/products/html/tigeri7320.html ) running with
> 2 Dual Nacona Core Xeons. I had the datacenter check the BIOS and everything
> is as it should be. I have Registered ECC RAM on it as well.
> 
> Both CPU's were recogized by Centos 4.1 X86-64, however I prefer FBSD to
> anything Linux. So if you guys could help me out I would appreciate it. I
> think I have given you all the relevant information I Hope but if not just
> ask me I will get it.
> 
> Thanks in advance
> -Dave
> 
> 
> _______________________________________________
> freebsd-amd64@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org"
> 
You said you did a kernel recompile, so did you include
'device		acpi'
'options	SMP'
in your custom kernel before you recompiled?

That is what did it for me.

Do a 'dmesg | less' and near the top portion you should see a statement 
like 'FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs' and then 
after showing the cpu info.

Like someone else mentioned, I also thought ACPI had to be enabled.


Sean



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43245C91.1090904>