Date: Fri, 17 Oct 2003 20:16:04 +0300 From: Ion-Mihai Tetcu <itetcu@tecnik93.com> To: questions@freebsd.org, hardware@freebsd.org Subject: mouse and hdd problems with GA-7VT600 (KT600/VT8237) Message-ID: <20031017201604.58b0ff0d.itetcu@tecnik93.com>
next in thread | raw e-mail | index | archive | help
Hi, I've changed my desktop MB from a (Gigabyte) GA-VA (KT400/VT8235) to a GA-VT600 1394 (KT400/VT8237) ( http://tw.giga-byte.com/MotherBoard/Products/Products_GA-7VT600%2013 94.htm ). I've swaped the HDD and the system came up with no problem except: 1. Mouse: I have tried an A4 Tech optical mouse (which was working fine with the old MB) and a Genius NetScroll+, both PS/2, but none seems to be working(e.g. the cursor just jump or doesn't move). I'll try tomorrow with a serial mouse. I don't know if it is related with the VT8235. Getting it to work is more urgent to me that the second issue. 2. The HDD is in PIO4 mode (I'm using a parallel ATA Seagate HDD, not an S-ATA). To my surprise the sound and network are working ok. I've google'd and found the following: 1. kern/55926 [patch] which was not committed (reason: http://lists.freebsd.org/pipermail/freebsd-bugs/2003-August/00 29 29.h tml). 2. The NetBSD folks seems to have integrated support for the VT8235 (both ATA and SATA): http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/pci/pciide.c (changes committed in rev. 199, rev. 197, rev. 196) If anyone has a hint on those ......... Tnx. The verbose DMESG and the output of pciconf -l -v are below (Note that I've disabled from BIOS the things I don't use. If someone whats to me to test them, please say). 0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.2\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.2\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.3\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.0\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.1\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.2\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.3\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.2\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.2\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.3---- before setting priority for links ------------\\_SB_.PCI0.LNKD: interrupts: 1 3 4 5 6 7 10 11 12 14 15 penalty: 101430 2430 2430 2730 2430 2430 2730 2730 2430 11430 11430 references: 13 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.LNKD: interrupts: 1 3 4 5 6 7 10 11 12 14 15 penalty: 101430 2430 2430 2730 2430 2430 2730 2730 2430 11430 11430 references: 13 priority: 170926 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.0\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.1\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.2\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.14.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.20.3\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.0\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.1\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.2\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.19.3\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.16.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.0\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.1\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.2\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 27, enabled found-> vendor=0x1106, dev=0x3189, revid=0x80 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb198, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000a000, size 8, enabled map[14]: type 1, range 32, base e2000000, size 8, enabled found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000a400, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=15, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3227, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b800, size 8, enabled found-> vendor=0x1106, dev=0x3059, revid=0x60 bus=0, slot=17, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000bc00, size 8, enabled map[14]: type 1, range 32, base e2002000, size 8, enabled found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=19, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e2003000, size 11, enabled map[14]: type 4, range 32, base 0000c000, size 7, enabled found-> vendor=0x1106, dev=0x3044, revid=0x46 bus=0, slot=20, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=5 powerspec 2 supports D0 D2 D3 current D0 agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 233M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xe0000000-0xe1ffffff pcib1: prefetched decode 0xd8000000-0xdfffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 4, range 32, base 00009000, size 8, enabled map[18]: type 1, range 32, base e1000000, size 16, enabled found-> vendor=0x1002, dev=0x4966, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon If R250 9000> port 0x9000-0x90ff mem 0xe1000000-0xe100ffff,0xd8000000-0xdfffffff irq 5 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 128MB info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xe2000000-0xe20000ff irq 11 at device 13.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:40:f4:79:6e:59 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached pci0: <mass storage, ATA> at device 15.0 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <VIA VT8233X> port 0xb800-0xb8ff irq 10 at device 17.5 on pci0 pcm0: <Unknown AC97 Codec (id = 0x414c4760)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5 pcm0: sndbuf_setmap 64b000, 1000; 0xc4037000 -> 64b000 pcm0: sndbuf_setmap 75d000, 1000; 0xc4089000 -> 75d000 pcm0: sndbuf_setmap 6db000, 1000; 0xc4087000 -> 6db000 pcm0: sndbuf_setmap 6d9000, 1000; 0xc4085000 -> 6d9000 pcm0: sndbuf_setmap 6d6000, 1000; 0xc4082000 -> 6d6000 pcm0: sndbuf_setmap 6b3000, 1000; 0xc407f000 -> 6b3000 rl1: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xe2002000-0xe20020ff irq 10 at device 19.0 on pci0 rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl1: Ethernet address: 00:0d:61:14:c8:17 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: bpf attached pci0: <serial bus, FireWire> at device 20.0 (no driver attached) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1041 0x1051 0x1041 0x1041 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1041 0x1049 0x1041 0x1041 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1: pre reset mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=00 stat1=00 ata1: devices=04 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad0: <ST3120023A/3.33> ATA-6 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, PIO4 ad0: piomode=12 dmamode=34 udmamode=69 cblid=1 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: piomode=12 dmamode=34 udmamode=-1 dmaflag=1 acd0: <SONY CD-RW CRX1611/TYS7> CD-RW drive at ata1 as master acd0: read 6890KB/s (36026KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61432497 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:61432560 l:173003985[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 31453438464 end 31453470719 GEOM: Configure ad0s2, start 31453470720 length 88578040320 end 120031511039 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 2147483648 end 2415919103 GEOM: Configure ad0s2c, start 0 length 88578040320 end 88578040319 GEOM: Configure ad0s2d, start 2415919104 length 536870912 end 2952790015 GEOM: Configure ad0s2e, start 2952790016 length 536870912 end 3489660927 GEOM: Configure ad0s2f, start 3489660928 length 53687091200 end 57176752127 GEOM: Configure ad0s2g, start 57176752128 length 31401288192 end 88578040319(probe3:ata1:0:1:0): CAM Status 0x39(probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 5 (probe3:ata1:0:1:0): Retries Exhausted (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 5 (probe3:ata1:0:1:0): Retries Exhausted (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): error 5 (probe0:ata0:0:0:0): Retries Exhausted (probe1:ata0:0:1:0): error 5 (probe1:ata0:0:1:0): Retries Exhausted (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): CAM Status 0x39 (probe0:ata0:0:0:0): Retrying Command (probe1:ata0:0:1:0): CAM Status 0x39 (probe1:ata0:0:1:0): Retrying Command (probe0:ata0:0:0:0): error 5 (probe0:ata0:0:0:0): Retries Exhausted (probe1:ata0:0:1:0): error 5 (probe1:ata0:0:1:0): Retries Exhausted pass0 at ata1 bus 0 target 0 lun 0 pass0: <SONY CD-RW CRX1611 TYS7> Removable CD-ROM SCSI-0 device pass0: Serial Number \^_ pass0: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s2a cd0 at ata1 bus 0 target 0 lun 0 cd0: <SONY CD-RW CRX1611 TYS7> Removable CD-ROM SCSI-0 device cd0: Serial Number \^_ cd0: 16.000MB/s transfers cd0: cd present [320790 x 2048 byte records] start_init: trying /sbin/init ************************ agp0@pci0:0:0: class=0x060000 card=0x50001458 chip=0x31891106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8377 Apollo KT400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1981106 rev=0x00 hdr=0x01 vendor = 'VIA Technologies Inc' device = 'ProSavageDDR P4X600 CPU to AGP Bridge' class = bridge subclass = PCI-PCI rl0@pci0:13:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' class = network subclass = ethernet none0@pci0:15:0: class=0x01018a card=0x50021458 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' class = mass storage subclass = ATA isab0@pci0:17:0: class=0x060100 card=0x50011458 chip=0x32271106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' class = bridge subclass = PCI-ISA pcm0@pci0:17:5: class=0x040100 card=0xa0021458 chip=0x30591106 rev=0x60 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8233/33A AC97 Enhanced Audio Controller' class = multimedia subclass = audio rl1@pci0:19:0: class=0x020000 card=0xe0001458 chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' class = network subclass = ethernet none1@pci0:20:0: class=0x0c0010 card=0x10001458 chip=0x30441106 rev=0x46 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller' class = serial bus subclass = FireWire drm0@pci1:0:0: class=0x030000 card=0x40101458 chip=0x49661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies' device = 'RV250 Radeon 9000/9000 Pro' class = display subclass = VGA ***************** ATA channel 0, Master, device ad0: ATA/ATAPI revision 6 device model ST3120023A serial number 3KA0DF3C firmware revision 3.33 cylinders 16383 heads 16 sectors/track 63 lba supported 234441648 sectors lba48 not supported 234441648 sectors dma supported overlap not supported Feature Support Enable Value Vendor write cache yes yes read ahead yes yes dma queued no no 0/00 SMART yes no microcode download yes yes security yes no power management yes yes advanced power management no no 65278/FEFE automatic acoustic management yes yes 128/80 128/80 -- IOnut FreeBSD unregistered ;) user
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031017201604.58b0ff0d.itetcu>