Date: Wed, 14 Dec 2005 20:17:02 -0800 From: "Gayn Winters" <gaynw@bristolsystems.com> To: "'Andrew Falanga'" <excalibur@icehouse.net>, <freebsd-questions@freebsd.org> Subject: RE: New to FreeBSD, need some questions answered Message-ID: <058901c6012e$66b18070$6501a8c0@workdog> In-Reply-To: <43A0E32F.8080305@icehouse.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of > Andrew Falanga > Sent: Wednesday, December 14, 2005 7:30 PM > To: freebsd-questions@freebsd.org > Subject: New to FreeBSD, need some questions answered > > > Hi, > > I'm new to FreeBSD but not to UNIX. The guy who burned me the 6.0 > release iso's told me that during the install, FreeBSD would > detect my Windows XP drive but it didn't. I have two hard drives, one > for FreeBSD one for Windows. The FreeBSD drive is SATA and the Windows is PATA > (IDE, but I'm sure you all knew that). I've been reading through the > Handbook, but I don't see in there how to configure the bootloader to > boot Windows. I'd like very much to use the bootloader as > I'm sick of going into CMOS every time and changing the "first" drive in > the system so that I get the OS I want. Please help. You mean you got through the install and when you were asked on which slice you wanted to install FreeBSD you were only offered the choice of the SATA drive? If you have a working FreeBSD system, what does dmesg say? What does fdisk (from inside FreeBSD) say? They both only see the SATA drive? Boot the system from DOS and run DOS's fdisk; what does it say? If all the FreeBSD utilities can see the SATA but not the PATA drive, then I'd check the cable and the jumpers on the PATA drive. Be sure the jumper is NOT set to Cable Select. Once you can see both drives, just answer "yes" to installing the FreeBSD boot loader during installation. If you don't want to reinstall, read man boot0cfg. Welcome and good luck, -gayn Bristol Systems Inc. 714/532-6776 www.bristolsystems.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?058901c6012e$66b18070$6501a8c0>