Date: Thu, 02 Mar 2000 16:21:37 -0800 From: Kent Stewart <kstewart@3-cities.com> To: David Bein <bein@world.std.com> Cc: freebsd-questions@freebsd.org Subject: Re: ATAPI question Message-ID: <38BF0591.CBD8F756@3-cities.com> References: <952039351/bein@world.std.com>
next in thread | previous in thread | raw e-mail | index | archive | help
David Bein wrote: > > Hi ... > > I have a new PC which I just tried to install 3.2 on. When that failed > to find the CDrom I tried with 2.2.8 which also failed to find the CDrom. > I already have Solaris 7 x86 installed on the machine and it finds the CDrom. > So I am wondering if anyone can give me a clue about what I need to do to my > kernel to recognize the drive. > > Enclosed is output from Solaris dmesg, followed by FreeBSD 2.2.8 dmesg > (running a generic kernel on the same machine, but a different slice). It isn't finding the secondary controller (wdc1 not found at 0x170). When you created Sanity2, did you enable the secondary controller. Then, you need the two ATAPI lines from the lint but they are usually in GENERIC unless you trimed them out. FreeBSD will not always find an ATAPI CDROM it is a slave and the only device on the controller. Kent > > Thanks very much ... > > --David > > ----------------------- > Mar 2 14:54 > > SunOS Release 5.7 Version Generic [UNIX(R) System V Release 4.0] > Copyright (c) 1983-1998, Sun Microsystems, Inc. > mem = 65084K (0x3f8f000) > avail mem = 51105792 > root nexus = i86pc > isa0 at root > pci0 at root: space 0 offset 0 > IDE device at targ 0, lun 0 lastlun 0x0 > model WDC WD102AA, stat 50, err 0 > cfg 0x427a, cyl 16383, hd 16, sec/trk 63 > mult1 0x8010, mult2 0x100, dwcap 0x0, cap 0x2f00 > piomode 0x280, dmamode 0x0, advpiomode 0x3 > minpio 120, minpioflow 120 > valid 0x7, dwdma 0x7, majver 0x1e > ata_set_feature: (0x66,0x0) failed > PCI-device: ata@0, ata0 > ata0 is /pci@0,0/pci-ide@7,1/ata@0 > ATAPI device at targ 1, lun 0 lastlun 0x0 > model CREATIVE CD5230E, stat 50, err 0 > cfg 0x85c0, cyl 0, hd 0, sec/trk 0 > mult1 0x0, mult2 0x0, dwcap 0x0, cap 0xf00 > piomode 0x400, dmamode 0x200, advpiomode 0x3 > minpio 227, minpioflow 120 > valid 0x2, dwdma 0x407, majver 0x0 > PCI-device: ata@1, ata1 > ata1 is /pci@0,0/pci-ide@7,1/ata@1 > Disk0: <Vendor 'Gen-ATA ' Product 'WDC WD102AA '> > cmdk0 at ata0 target 0 lun 0 > cmdk0 is /pci@0,0/pci-ide@7,1/ata@0/cmdk@0,0 > root on /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0:a fstype ufs > ISA-device: asy0 > asy0 is /isa/asy@1,3f8 > Number of console virtual screens = 13 > cpu 0 initialization complete - online > dump on /dev/dsk/c0d0s4 size 86 MB > > ----------------------- > > Copyright (c) 1992-1998 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > FreeBSD 2.2.8-RELEASE #0: Wed Jan 26 12:13:31 EST 2000 > bein@world.std.com:/usr/src/sys/compile/SANITY2 > CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x58c Stepping=12 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > real memory = 67108864 (65536K bytes) > avail memory = 63008768 (61532K bytes) > Probing for devices on PCI bus 0: > chip0 <generic PCI bridge (vendor=1106 device=0598 subclass=0)> rev 4 on pci0:0:0 > chip1 <generic PCI bridge (vendor=1106 device=8598 subclass=4)> rev 0 on pci0:1:0 > chip2 <generic PCI bridge (vendor=1106 device=0596 subclass=1)> rev 18 on pci0:7:0 > pci0:7:1: VIA Technologies, device=0x0571, class=storage (ide) [no driver assigned] > pci0:7:2: VIA Technologies, device=0x3038, class=serial, subclass=0x03 int d irq 11 [no driver assigned] > chip3 <generic PCI bridge (vendor=1106 device=3050 subclass=0)> rev 32 on pci0:7:3 > Probing for devices on PCI bus 1: > vga0 <VGA-compatible display device> rev 2 on pci1:0:0 > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > ed0 not found at 0x280 > fe0 not found at 0x300 > sio0 at 0x3f8-0x3ff irq 4 on isa > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1 not found at 0x2f8 > lpt0 at 0x378-0x37f irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > lpt1 not found at 0xffffffff > mse0 not found at 0x23c > psm0 at 0x60-0x64 irq 12 on motherboard > psm0: model IntelliMouse, device ID 3 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <WDC WD102AA> > wd0: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S > wdc1 not found at 0x170 > bt0 not found at 0x330 > uha0 not found at 0x330 > aha0 not found at 0x330 > aic0 not found at 0x340 > nca0 not found at 0x1f88 > nca1 not found at 0x350 > sea0 not found > wt0 not found at 0x300 > mcd0 not found at 0x300 > matcdc0 not found at 0x230 > scd0 not found at 0x230 > ie0: unknown board_id: f000 > ie0 not found at 0x300 > ep0 not found at 0x300 > ex0 not found at 0xffffffff > le0 not found at 0x300 > lnc0 not found at 0x280 > ze0 not found at 0x300 > zp0 not found at 0x300 > npx0 flags 0x1 on motherboard > npx0: INT 16 interface > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38BF0591.CBD8F756>