Date: Fri, 3 Dec 1999 17:38:28 +0000 From: Mark Ovens <mark@ukug.uk.freebsd.org> To: nrrobins@unity.ncsu.edu Cc: freebsd-questions@freebsd.org Subject: Re: ppp troubles: failed to open /dev/cuaa0 Message-ID: <19991203173828.A319@marder-1> In-Reply-To: <199912030418.XAA17123@uni01du.unity.ncsu.edu> References: <199912030418.XAA17123@uni01du.unity.ncsu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 02, 1999 at 11:18:17PM -0500, nrrobins@unity.ncsu.edu wrote:
> Hello,
>
> I just cvsup'd and did a "make world" successfully to 3.3-Stable this
> afternoon and now I am trying to connect to the internet again.
>
> I know it worked before hand, and I am pretty sure I used the connection
> afterwards, but not certain. I left for work and when I returned I
> started to get an error and have not been able to connect since. My
> modem is a external Boca 33.6 that I have had success with since 3.1.
>
> Here is my ppp.conf:
>
> default:
> set log Phase Chat LCP IPCP CCP tun command
> set device /dev/cuaa0
> set speed 115200
> set dial "ABORT BUSY ABORT ...."
> isp:
> set phone 1234567
> set timeout 0
> set authname username
> set authkey password
> set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> add default HISADDR
> enable dns
>
>
> Here is the command I use to start PPP:
>
> # ppp isp
> # ppp ON myname> dial
> # ppp on myname>
>
> and it just sits there doing nothing.
>
> Here is my info from my ppp.log file:
>
> Phase: Using interface: tun0
> Phase: deflink: Created in closed state
> tun0: Command: default: set device /dev/cuaa0
> tun0: Command: default: set speed 115200
> tun0: Command: default: set dial ABORT BUSY ABORT ....
> tun0: Command: isp: set phone 1234567
> tun0: Command: isp: set timeout 0
> tun0: Command: isp: set authname username
> tun0: Command: isp: set authkey password
> tun0: Command: isp: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> tun0: Command: isp: add default HISADDR
> tun0: Command: isp: enable dns
> tun0: Phase: PPP started (Interactive mode)
> tun0: Command: /dev/tty: term
> tun0: Phase: bundle: Establish
> tun0: Phase: deflink: closed -> opening
> tun0: Phase: /dev/cuaa0 is in use: uu_lock creat error: No such file or
> directory
Check that /var/spool/lock exists. It creates a lock file there
(LCK..cuaa2).
> tun0: Chat: Failed to open device
> tun0: Phase: deflink: opening -> closed
> tun0: Phase: bundle: Dead
> tun0: Command: /dev/tty: quit
> tun0: Phase: PPP Terminated (normal)
>
>
> cuaa0 exists (dmesg reports it found and I did a MAKEDEV) but when I try
> a manual ppp with term I dont see the lights on the modem acting up in
> response. What might be the solution to this? I did not see anything in
> the archives specifically regarding this.
>
> Thanks.
>
> -Neill
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
--
PERL has been described as "the duct tape of the Internet"
and "the Unix Swiss Army chainsaw"
- Computer Shopper 12/99
________________________________________________________________
FreeBSD - The Power To Serve http://www.freebsd.org
My Webpage http://ukug.uk.freebsd.org/~mark/
mailto:mark@ukug.uk.freebsd.org http://www.radan.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991203173828.A319>