Date: Wed, 2 May 2001 23:37:07 -0700 (PDT) From: "Kim C. Callis" <root@c2associates.net> To: <freebsd-mobile@freebsd.org> Cc: "Kim C. Callis" <kcallis@c2associates.net> Subject: Re: 4.3 PCMCIA issues... Message-ID: <20010502233513.A4275-200000@valiant.c2associates.net> In-Reply-To: <15088.35235.820436.69874@hip186.ch.intel.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Wed, 2 May 2001, John Reynolds~ wrote:
>
> [ On Wednesday, May 2, Kim C. Callis wrote: ]
> > Hello Folks,
> >
> > I am using FreeBSD 4.3 Release on a Compaq Armada M700. After a wonderfully easy cvsup makeworld upgrade, I have noticed the following. Anytime I insert a PCMCIA card in the Armada, the system immediately freezes up. There is no warning, no core dumps, and nothing indicated in the log files. Has anyone else run into this or am I the acception?
> >
> > Thanks,
> >
>
> did you have to do anything "special" during your original install? Like
> change the irq value of the pcic0 controller to something other than 0? By
> default pcic is in 'polling' mode.
Nope, there were no changes to my kernel configuration files with the
exception of the original changes, which were working fine under 4.1.
>
> Perhaps in the kernel you built during your CVSup->upgrade path, you didn't
> have pcic0 assigned to an IRQ. What does your dmesg output for pcic say before
> you lock the machine up inserting a card?
>
I am attaching my current dmsg, but it looks ok to me....
Kim C. Callis
[-- Attachment #2 --]
\^H\^A@@\^H@ @@ \^B\^BCopyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #1: Tue May 1 21:18:10 GMT 2001
root@valiant.c2associates.net:/usr/obj/usr/src/sys/VALIANT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (746.61-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 258117632 (252068K bytes)
Preloaded elf kernel "kernel" at 0xc031b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x3420-0x342f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3400-0x341f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4000-0x400f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x3000-0x30ff irq 11 at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3440-0x347f mem 0x41200000-0x4121ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:13:56:0a
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xdc000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM SD-C2402> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #1: Tue May 1 21:18:10 GMT 2001
root@valiant.c2associates.net:/usr/obj/usr/src/sys/VALIANT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (746.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 258117632 (252068K bytes)
Preloaded elf kernel "kernel" at 0xc031b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x3420-0x342f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3400-0x341f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4000-0x400f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x3000-0x30ff irq 11 at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3440-0x347f mem 0x41200000-0x4121ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:13:56:0a
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xdc000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM SD-C2402> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010502233513.A4275-200000>