Date: Wed, 11 May 2022 19:42:22 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 263928] sdhci_xenon puts SD card in read-only mode on 13.1 Message-ID: <bug-263928-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D263928 Bug ID: 263928 Summary: sdhci_xenon puts SD card in read-only mode on 13.1 Product: Base System Version: 13.1-RELEASE Hardware: arm64 OS: Any Status: New Severity: Affects Some People Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: cuicui@gmail.com I was running 13.0-Release on espressobin booting off SD card. After upgrad= ing to 13.1, the system no longer boots because the SD card is in read-only mode and the root filesystem cannot be mounted. Log on 13.1: sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 mmc0: <MMC/SD bus> on sdhci_xenon0 mmcsd0: 32GB <SDHC GB1QT 3.0 SN 2C0B63BC MFG 04/2020 by 27 SM> (read-only) = at mmc0 50.0MHz/4bit/65535-block Log on 13.0: sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 mmc0: <MMC/SD bus> on sdhci_xenon0 mmcsd0: 32GB <SDHC GB1QT 3.0 SN 2C0B63BC MFG 04/2020 by 27 SM> at mmc0 50.0MHz/4bit/65535-block Between 13.0-Release and 13.1-RC6: the following 6 changes were added: 1b19617e9662 sdhci_xenon: remove redundant code in property parsing a2f06581802b sdhci_xenon: add AP807 compatible string 8bb448b66e9d sdhci_xenon: add UHS support 7518736826a2 sdhci_xenon: improve the VCCQ voltage switch sequence 68be9ab5bd53 sdhci_xenon: allow to properly disable the UHS signaling 707ab1f0643a sdhci_xenon: enable MMC FDT parsing After reverting all 6 changes I can get 13.1-RC6 to boot again. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-263928-227>