Date: Thu, 23 Jan 2003 14:47:38 +0100 From: Toni Schmidbauer <toni@stderror.at> To: freebsd-mobile@freebsd.org Subject: xl thinkpad 600x watchdog timeout Message-ID: <20030123134738.GB13085@devil.stderror.at>
next in thread | raw e-mail | index | archive | help
--YD3LsXFS42OYHhNZ
Content-Type: multipart/mixed; boundary="ADZbWkCsHQ7r3kzd"
Content-Disposition: inline
--ADZbWkCsHQ7r3kzd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
hi,
i am having problems with 5.0-REL on an ibm thinkpad 600x.the xl
driver for my 3com 3ccfe575ct writes the following message to the=20
console "xl0: watchdog timeout".=20
after skimming through newsgroups i found out that it has
something to the with irq mapping. the cardbus controller uses
irq11. my first try was to disable the usb-controller because it
uses irq11 too. no luck!
a boot -v shows me that a hole bunch of pci devices uses irq11...
the problem is that the network connection is _very_ slow. i
think its because of the irq conflict. had anyone the same
problems before?
i also tried a different card (3com 3cxfe575bt) - same effect.
removing the card from the pcmcia slot prompts:
"xl0: command never completed!" and
"xl0: reset didn't complete"
find attached:
- pciconf -v -l
- boot -v with usb
- boot -v w/o usb
any help would be appreciated=20
toni
--=20
Terror ist der Krieg der Armen, | toni@stderror.at
Krieg ist der Terror der Reichen. | Toni Schmidbauer
- Sir Peter Ustinov |
--ADZbWkCsHQ7r3kzd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="pciconf.out"
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
cbb0@pci0:2:0: class=0x060700 card=0x01301014 chip=0xac1b104c rev=0x03 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1450 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:2:1: class=0x060700 card=0x01301014 chip=0xac1b104c rev=0x03 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1450 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
none0@pci0:3:0: class=0x078000 card=0x018c1014 chip=0x044911c1 rev=0x01 hdr=0x00
vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
device = 'LT Winmodem 56k'
class = simple comms
none1@pci0:6:0: class=0x040100 card=0x01531014 chip=0x60031013 rev=0x01 hdr=0x00
vendor = 'Cirrus Logic'
device = 'Crystal CS4610/14/22/24/30 SoundFusion PCI Audio Accelerator'
class = multimedia
subclass = audio
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-unknown
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
none2@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none3@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
none4@pci1:0:0: class=0x030000 card=0x01521014 chip=0x000610c8 rev=0x00 hdr=0x00
vendor = 'Neomagic Corporation'
device = 'NM2360 MagicMedia 256ZX / 256M6D'
class = display
subclass = VGA
--ADZbWkCsHQ7r3kzd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Thu Jan 23 10:50:48 GMT 2003
root@castrop:/usr/obj/usr/src/sys/wasnix
Preloaded elf kernel "/boot/kernel/kernel" at 0xc062b000.
Calibrating clock(s) ... TSC clock: 498272908 Hz, i8254 clock: 1193186 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 134021120 (127 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00652000 - 0x07fc7fff, 127361024 bytes (31094 pages)
avail memory =3D 123564032 (117 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry =3D 0xfd820 (c00fd820) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry =3D f0000:e724 Rev =3D 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086)
Using $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboa=
rd
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0xa210, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x88 (34000 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D1
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Db, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
found-> vendor=3D0x11c1, dev=3D0x0449, revid=3D0x01
bus=3D0, slot=3D3, func=3D0
class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x8290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0xfc (63000 ns), maxlat=3D0x0e (3500 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
found-> vendor=3D0x1013, dev=3D0x6003, revid=3D0x01
bus=3D0, slot=3D6, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x0410, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
bus=3D0, slot=3D7, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x03
bus=3D0, slot=3D7, func=3D3
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff=
at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 3, range 32, base e0000000, size 25, enabled
map[14]: type 1, range 32, base 70000000, size 22, enabled
map[18]: type 1, range 32, base 70400000, size 20, enabled
found-> vendor=3D0x10c8, dev=3D0x0006, revid=3D0x00
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0xff (63750 n=
s)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at devic=
e 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at devic=
e 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on=
pci0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xfcf0
ata0: mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xfcf8
ata1: mask=3D03 ostat0=3D51 ostat2=3D00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=3D03 stat0=3D00 stat1=3D00
ata1: devices=3D04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f irq 11 =
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 18 devices, largest 122 bytes
PNP0000: adding fixed io range 0x20-0x21, size=3D0x2, align=3D0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=3D0x2, align=3D0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding fixed io range 0-0xf, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0x80-0x8f, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=3D0x20, align=3D0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=3D0x4, align=3D0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=3D0x4, align=3D0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=3D0x1, align=3D0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=3D0x1, align=3D0x1
PNP0303: adding fixed io range 0x64-0x64, size=3D0x1, align=3D0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=3D0x10, align=3D0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=3D0x1, align=3D0
PNP0c02: adding io range 0x2e-0x2f, size=3D0x2, align=3D0
PNP0c02: adding io range 0x92-0x92, size=3D0x1, align=3D0
PNP0c02: adding io range 0xb2-0xb3, size=3D0x2, align=3D0
PNP0c02: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
PNP0c02: adding io range 0x15e0-0x15ef, size=3D0x10, align=3D0
PNP0c02: adding io range 0xef00-0xefaf, size=3D0xb0, align=3D0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=3D0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=3D0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=3D0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=3D0x4, align=3D0
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
IBM0071: adding irq mask 0x10
IBM0071: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 14 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=3D0x2, align=3D0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=3D0x8, align=3D0
PNP0680: adding io range 0x3f6-0x3f7, size=3D0x2, align=3D0
PNP0680: adding io range 0xfcf0-0xfcf7, size=3D0x8, align=3D0
pnpbios: handle 18 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=3D0x8, align=3D0
PNP0680: adding io range 0x376-0x376, size=3D0x1, align=3D0
PNP0680: adding io range 0xfcf8-0xfcff, size=3D0x8, align=3D0
pnpbios: handle 20 device ID PNP0680 (8006d041)
pnpbios: handle 22 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7=
,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. =
Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. =
Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. =
Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. =
Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. =
Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. =
Failing probe.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330.=
Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x22 iomem 0xffff0000-0xffffffff,0x100000-0x7fff=
fff,0xf0000-0xfffff,0-0x9ffff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x3bc-0x3bf on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
BIOS Geometries:
0:03feef3f 0..1022=3D1023 cylinders, 0..239=3D240 heads, 1..63=3D63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=3D0x10b7, dev=3D0x5257, revid=3D0x10
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x05 (1250 ns)
intpin=3Da, irq=3D255
Manufacturer ID: 01015752
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 |=20
Functions: Network Adaptor, Memory
CIS reading done
cardbus0: Resource not specified in CIS: id=3D14, size=3D80
cardbus0: Resource not specified in CIS: id=3D18, size=3D80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x103f mem 0x88000000-0x88=
00007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus0
xl0: Ethernet address: 00:01:02:bd:2b:ef
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DARA-212000/AR4IA52A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=3D4 dmamode=3D2 udmamode=3D4 cblid=3D1
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D-1 dmaflag=3D1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1902B/1717> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 4722246144 end 4722278399
GEOM: Configure ad0s2, start 4722278400 length 7346626560 end 12068904959
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s2c, start 0 length 7346626560 end 7346626559
GEOM: Configure ad0s2d, start 402653184 length 3145728000 end 3548381183
GEOM: Configure ad0s2e, start 3548381184 length 2097152000 end 5645533183
GEOM: Configure ad0s2f, start 5645533184 length 1701093376 end 7346626559
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
--ADZbWkCsHQ7r3kzd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg_wousb.out"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #1: Thu Jan 23 13:35:57 GMT 2003
root@castrop:/usr/obj/usr/src/sys/wasnix
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c9000.
Calibrating clock(s) ... TSC clock: 498275308 Hz, i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 134021120 (127 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004f0000 - 0x07fc7fff, 128811008 bytes (31448 pages)
avail memory =3D 125018112 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry =3D 0xfd820 (c00fd820) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry =3D f0000:e724 Rev =3D 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086)
Using $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboa=
rd
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0xa210, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x88 (34000 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
found-> vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
bus=3D0, slot=3D2, func=3D1
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Db, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
found-> vendor=3D0x11c1, dev=3D0x0449, revid=3D0x01
bus=3D0, slot=3D3, func=3D0
class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x8290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0xfc (63000 ns), maxlat=3D0x0e (3500 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
found-> vendor=3D0x1013, dev=3D0x6003, revid=3D0x01
bus=3D0, slot=3D6, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x0410, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
bus=3D0, slot=3D7, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x30 (1440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x03
bus=3D0, slot=3D7, func=3D3
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff=
at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 3, range 32, base e0000000, size 25, enabled
map[14]: type 1, range 32, base 70000000, size 22, enabled
map[18]: type 1, range 32, base 70400000, size 20, enabled
found-> vendor=3D0x10c8, dev=3D0x0006, revid=3D0x00
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0xff (63750 n=
s)
intpin=3Da, irq=3D11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at devic=
e 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at devic=
e 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on=
pci0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xfcf0
ata0: mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xfcf8
ata1: mask=3D03 ostat0=3D51 ostat2=3D00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=3D03 stat0=3D00 stat1=3D00
ata1: devices=3D04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 18 devices, largest 122 bytes
PNP0000: adding fixed io range 0x20-0x21, size=3D0x2, align=3D0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=3D0x2, align=3D0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding fixed io range 0-0xf, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0x80-0x8f, size=3D0x10, align=3D0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=3D0x20, align=3D0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=3D0x4, align=3D0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=3D0x4, align=3D0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=3D0x1, align=3D0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=3D0x1, align=3D0x1
PNP0303: adding fixed io range 0x64-0x64, size=3D0x1, align=3D0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=3D0x10, align=3D0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=3D0x1, align=3D0
PNP0c02: adding io range 0x2e-0x2f, size=3D0x2, align=3D0
PNP0c02: adding io range 0x92-0x92, size=3D0x1, align=3D0
PNP0c02: adding io range 0xb2-0xb3, size=3D0x2, align=3D0
PNP0c02: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
PNP0c02: adding io range 0x15e0-0x15ef, size=3D0x10, align=3D0
PNP0c02: adding io range 0xef00-0xefaf, size=3D0xb0, align=3D0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=3D0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=3D0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=3D0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=3D0x4, align=3D0
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
IBM0071: adding irq mask 0x10
IBM0071: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 14 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=3D0x2, align=3D0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=3D0x8, align=3D0
PNP0680: adding io range 0x3f6-0x3f7, size=3D0x2, align=3D0
PNP0680: adding io range 0xfcf0-0xfcf7, size=3D0x8, align=3D0
pnpbios: handle 18 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=3D0x8, align=3D0
PNP0680: adding io range 0x376-0x376, size=3D0x1, align=3D0
PNP0680: adding io range 0xfcf8-0xfcff, size=3D0x8, align=3D0
pnpbios: handle 20 device ID PNP0680 (8006d041)
pnpbios: handle 22 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7=
,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0xb2-0xb3,0x92,0x2e-0x2f,0x22 iomem =
0xffff0000-0xffffffff,0x100000-0x7ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x3bc-0x3bf on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
BIOS Geometries:
0:03feef3f 0..1022=3D1023 cylinders, 0..239=3D240 heads, 1..63=3D63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=3D0x10b7, dev=3D0x5257, revid=3D0x10
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0xa8 (5040 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x05 (1250 ns)
intpin=3Da, irq=3D255
Manufacturer ID: 01015752
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 |=20
Functions: Network Adaptor, Memory
CIS reading done
cardbus1: Resource not specified in CIS: id=3D14, size=3D80
cardbus1: Resource not specified in CIS: id=3D18, size=3D80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x103f mem 0x88000000-0x88=
00007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus1
xl0: Ethernet address: 00:01:02:bd:2b:ef
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DARA-212000/AR4IA52A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=3D4 dmamode=3D2 udmamode=3D4 cblid=3D1
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D-1 dmaflag=3D1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1902B/1717> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 4722246144 end 4722278399
GEOM: Configure ad0s2, start 4722278400 length 7346626560 end 12068904959
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s2c, start 0 length 7346626560 end 7346626559
GEOM: Configure ad0s2d, start 402653184 length 3145728000 end 3548381183
GEOM: Configure ad0s2e, start 3548381184 length 2097152000 end 5645533183
GEOM: Configure ad0s2f, start 5645533184 length 1701093376 end 7346626559
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
--ADZbWkCsHQ7r3kzd--
--YD3LsXFS42OYHhNZ
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
iD8DBQE+L/J4u/mjSj7RMocRApClAJwNsUmIHGnvfl7mtme+TEpMON2JlwCeNE/t
bPdR1sOgq0eBAX6fNaVHfgY=
=HMVX
-----END PGP SIGNATURE-----
--YD3LsXFS42OYHhNZ--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030123134738.GB13085>