Date: Sun, 22 Jan 2012 19:51:30 +0200 From: Aleksandr Rybalko <ray@freebsd.org> To: Stefan Bethke <stb@lassitu.de> Cc: freebsd-net@FreeBSD.org, freebsd-arch@FreeBSD.org Subject: Re: Ethernet Switch Framework Message-ID: <20120122195130.360261ce.ray@freebsd.org> In-Reply-To: <30A45A1E-CA13-4AC8-86FB-F8E06301D1F6@lassitu.de> References: <20120120221319.ca8b631f.ray@freebsd.org> <30A45A1E-CA13-4AC8-86FB-F8E06301D1F6@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 22 Jan 2012 16:31:06 +0100 Stefan Bethke <stb@lassitu.de> wrote: > Am 20.01.2012 um 21:13 schrieb Aleksandr Rybalko: > > > It include sys/mips/conf/AR7240, that together with hints file is > > good example for typical AR7240 setup. > > IÄm heaving trouble getting this to work. The patch applies cleanly > and I can get a kernel compiled and booted, but neither arge0 nor > arge1 appear to be functional. I had to roll my own kernel config as > your AR7240 hangs before printing anything on my TL-MR3420. Yeah, I know where is problem, to proper attach switch framework to arge, arge must be regular NIC. Here is the patch for that: http://my.ddteam.net/files/2012-01-22_arge.patch Hope it will apply cleanly. Patch have fixed both arge problems (problem for allocation of ring buffer, and stray interrupts) + remove most phymask bits + whitespace cleanup. Thank you for testing that Stefan. P.S. I can't test clear SoC config on my board, because my board id D-Link DIR-615_E4 with modified U-Boot in it, which able to load only FW images, but not ELF kernel. So I test it with ZRouter.org FW image instead. P.P.S. can you also show me network part of your config and hints files. P.P.P.S. still working on your previous question about subj, already begin work on more wide documentation on wiki, but still far enough :) "http://wiki.freebsd.org/AleksandrRybalko/Switch Framework" > > dmesg and devinfo below. > > > Stefan > > CPU platform: Atheros AR7241 rev 1 > CPU Frequency=400 MHz > CPU DDR Frequency=400 MHz > CPU AHB Frequency=200 MHz > platform frequency: 400000000 > arguments: > a0 = 00000008 > a1 = a1f87fb0 > a2 = a1f88470 > a3 = 00000004 > Cmd line:argv is invalid > Environment: > envp is invalid > Cache info: > picache_stride = 4096 > picache_loopcount = 16 > pdcache_stride = 4096 > pdcache_loopcount = 8 > cpu0: MIPS Technologies processor v116.147 > MMU: Standard TLB, 16 entries > L1 i-cache: 4 ways of 512 sets, 32 bytes per line > L1 d-cache: 4 ways of 256 sets, 32 bytes per line > Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > Config3=0x20 > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-CURRENT #1: Thu Jan 1 01:00:00 CET 1970 > stb@dummy:/home/stb/working/fe/obj/mipseb/mips.mipseb/home/stb/working/fe/freebsd/sys/TL-MR3420D > mips WARNING: WITNESS option enabled, expect reduced performance. > real memory = 33554432 (32768K bytes) > avail memory = 25567232 (24MB) > random device not loaded; using insecure entropy > nexus0: <MIPS32 root nexus> > nexus0: failed to add child: arge0 > nexus0: failed to add child: arge1 > clock0: <Generic MIPS32 ticker> on nexus0 > Timecounter "MIPS32" frequency 200000000 Hz quality 800 > Event timer "MIPS32" frequency 200000000 Hz quality 800 > apb0 at irq 4 on nexus0 > uart0: <16550 or compatible> on apb0 > uart0: console (115200,n,8,1) > gpio0: <Atheros AR71XX GPIO driver> on apb0 > gpio0: [GIANT-LOCKED] > gpio0: function_set: 0x0 > gpio0: function_clear: 0x0 > gpio0: gpio pinmask=0x1943 > gpioc0: <GPIO controller> on gpio0 > gpiobus0: <GPIO bus> on gpio0 > gpioled0: <GPIO led> at pin(s) 0 on gpiobus0 > gpioled1: <GPIO led> at pin(s) 1 on gpiobus0 > gpioled2: <GPIO led> at pin(s) 3 on gpiobus0 > ehci0: <AR71XX Integrated USB 2.0 controller> at mem > 0x1b000100-0x1bffffff irq 1 on nexus0 usbus0: set host controller mode > usbus0: EHCI version 1.0 > usbus0: set host controller mode > usbus0: <AR71XX Integrated USB 2.0 controller> on ehci0 > arge0: <Atheros AR71xx built-in ethernet interface> at mem > 0x19000000-0x19000fff irq 2 on nexus0 arge0: Overriding MAC from > EEPROM arge0: No PHY specified, using mask 16 > miibus0: <MII bus> on arge0 > floatphy0 PHY 0 on miibus0 > floatphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, auto switch0 PHY 1 on miibus0 > switch0: 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master > ar8x16_switch0: <Unknown AR8x16 like Ethernet switch (00.00)> on > switch0 arge0: Ethernet address: ff:ff:ff:ff:ff:ff arge1: <Atheros > AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq > 3 on nexus0 arge1: No PHY specified, using mask 15 arge1: Ethernet > address: ff:ff:ff:ff:ff:00 spi0: <AR71XX SPI> at mem > 0x1f000000-0x1f00000f on nexus0 spibus0: <spibus bus> on spi0 mx25l0: > <M25Pxx Flash Family> at cs 0 on spibus0 mx25l0: s25s1032, sector > 65536 bytes, 64 sectors ar71xx_wdog0: <Atheros AR71XX watchdog timer> > on nexus0 ar71xx_wdog0: Previous reset was due to watchdog timeout > Timecounters tick every 1.000 msec > usbus0: 480Mbps High Speed USB v2.0 > ugen0.1: <Atheros> at usbus0 > uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus0 WARNING: WITNESS option enabled, expect reduced performance. > uhub0: 1 port with 1 removable, self powered > Root mount waiting for: usbus0 > Root mount waiting for: usbus0 > Root mount waiting for: usbus0 > ugen0.2: <Kingston> at usbus0 > umass0: <Kingston DataTraveler G3, class 0/0, rev 2.00/1.00, addr 2> > on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:0:0:-1: Attached to scbus0 > Trying to mount root from ufs:map/rootfs.uzip []... > mountroot: waiting for device map/rootfs.uzip ... > da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: <Kingston DataTraveler G3 PMAP> Removable Direct Access SCSI-0 > device da0: 40.000MB/s transfers > da0: 15252MB (31236096 512 byte sectors: 255H 63S/T 1944C) > Trying to mount root from ufs:da0s1a []... > warning: no time-of-day clock registered, system time will not be set > accurately Setting hostuuid: aed4c502-193a-11e1-b662-74ea3ae4d920. > Setting hostid: 0x6a714343. > Entropy harvesting: interrupts ethernet point_to_point kickstart. > Starting file system checks: > /dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1a: clean, 3849245 free (1085 frags, 481020 blocks, 0.0% > fragmentation) lock order reversal: > 1st 0x8095691c ufs (ufs) > @ /home/stb/working/fe/freebsd/sys/kern/vfs_mount.c:1245 2nd > 0x80956e94 devfs (devfs) > @ /home/stb/working/fe/freebsd/sys/kern/vfs_subr.c:2167 KDB: stack > backtrace: db_trace_thread+30 (?,?,?,?) ra c3f597c000000018 sp 0 sz 0 > db_trace_self+1c (?,?,?,?) ra c3f597d800000018 sp 0 sz 0 800776d8+34 > (?,?,?,?) ra c3f597f0000001a0 sp 0 sz 0 kdb_backtrace+44 (?,?,?,?) ra > c3f5999000000018 sp 0 sz 0 801b3bbc+34 (?,?,?,?) ra c3f599a800000020 > sp 0 sz 0 witness_checkorder+9cc (?,?,803b1f7c,877) ra > c3f599c800000050 sp 0 sz 1 __lockmgr_args+948 (?,?,80956eb4,?) ra > c3f59a1800000070 sp 0 sz 1 vop_stdlock+4c (?,?,?,?) ra > c3f59a8800000028 sp 0 sz 0 VOP_LOCK1_APV+e4 (?,?,?,?) ra > c3f59ab000000020 sp 0 sz 0 _vn_lock+84 (?,?,?,?) ra c3f59ad000000048 > sp 0 sz 0 vget+c8 (?,?,?,?) ra c3f59b1800000030 sp 0 sz 0 > devfs_allocv+100 (?,?,?,?) ra c3f59b4800000038 sp 0 sz 0 > 800ba9b4+4c (?,?,?,?) ra c3f59b8000000028 sp 0 sz 0 > vflush+6c (?,?,0,80991300) ra c3f59ba8000000f8 sp 0 sz 1 > 800baa74+54 (?,?,?,?) ra c3f59ca000000028 sp 0 sz 0 > dounmount+3f0 (809e8000,?,?,?) ra c3f59cc800000050 sp 100000000 sz 0 > sys_unmount+39c (?,?,?,?) ra c3f59d18000000b0 sp 0 sz 0 > trap+7f4 (?,?,?,?) ra c3f59dc8000000b8 sp 0 sz 0 > MipsUserGenException+10c (?,?,?,404b53c0) ra c3f59e8000000000 sp 0 sz > 0 pid 70 > Mounting local file systems:. > Setting hostname: whitebox.lassitu.de. > miibus0: mii_mediachg: can't handle non-zero PHY instance 1 > floatphy0: found master switch0 > miibus0: mii_mediachg: can't handle non-zero PHY instance 1 > arge0: link state changed to DOWN > Starting Network: lo0 arge0 arge1. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3<RXCSUM,TXCSUM> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > arge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 1500 options=80000<LINKSTATE> > ether ff:ff:ff:ff:ff:ff > inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 > inet6 fe80::481f:1b46:dbf1:bd78%arge0 prefixlen 64 scopeid > 0x2 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (100baseTX <full-duplex>) > status: no carrier > arge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 1500 ether ff:ff:ff:ff:ff:00 > inet 44.128.65.33 netmask 0xffffffc0 broadcast 44.128.65.63 > inet6 fe80::481f:1b46:dbf1:bd78%arge1 prefixlen 64 scopeid > 0x3 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet 100baseTX <full-duplex> > status: active > add net default: gateway 44.128.65.1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > Mounting NFS file systems:mount_nfs: diesel: hostname nor servname > provided, or not known . > Creating and/or trimming log files. > No core dumps found. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > Setting date via ntp. > Error : hostname nor servname provided, or not known > 22 Jan 15:01:04 ntpdate[566]: can't find host diesel > > 22 Jan 15:01:04 ntpdate[566]: no servers can be used, exiting > Clearing /tmp (X related). > Mounting late file systems:mount_nfs: diesel: hostname nor servname > provided, or not known . > Mounting /etc/fstab filesystems failed,Jan 22 15:01:12 init: /bin/sh > on /etc/rc terminated abnormally, going to single user mode Enter > full pathname of shell or RETURN for /bin/sh: > # devinfo > nexus0 > clock0 > apb0 > uart0 > gpio0 > gpioc0 > gpiobus0 > gpioled0 > gpioled1 > gpioled2 > ehci0 > usbus0 > uhub0 > umass0 > arge0 > miibus0 > floatphy0 > switch0 > ar8x16_switch0 > arge1 > spi0 > spibus0 > mx25l0 > ar71xx_wdog0 > # > > > -- > Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811 > > > -- Aleksandr Rybalko <ray@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120122195130.360261ce.ray>