Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Apr 2006 23:47:35 -0600
From:      Scott Long <scottl@samsco.org>
To:        Anish Mistry <mistry.7@osu.edu>
Cc:        freebsd-current@freebsd.org
Subject:   Re: panic: mutex Giant not owned at /usr/src/sys/cam/cam_xpt.c:4837
Message-ID:  <444F0977.3010103@samsco.org>
In-Reply-To: <200604260143.33661.mistry.7@osu.edu>
References:  <200604260045.32557.mistry.7@osu.edu> <444EFD30.1020201@samsco.org> <200604260143.33661.mistry.7@osu.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
I don't see how thread could have jumped from kern_sendit() to
xpt_action().  There either are a whole lot of missing stack
frames, or some freaky preemption happened that screwed up the
stack.

Scott


Anish Mistry wrote:
> On Wednesday 26 April 2006 00:55, Scott Long wrote:
> 
>>This trace doesn't make much sense.  Maybe FUSE is inappropriately
>>messing with CAM internals?
> 
> Fuse doesn't seem to use CAM at all, and Fuse didn't have any active 
> mounts anytime during that boot.  I seriously doubt I can reproduce 
> this so I guess it'll just be relegated to the archives.  I do have a 
> crash dump if anyone is interested.
> 
> 
>>Scott
>>
>>Anish Mistry wrote:
>>
>>>I got the above panic from CURRENT as of April 19th.  I wasn't
>>>running anything cam related, at least I don't think so.  The
>>>system was just idle.
>>>
>>>Unread portion of the kernel message buffer:
>>>panic: mutex Giant not owned at /usr/src/sys/cam/cam_xpt.c:4837
>>>KDB: enter: panic
>>>panic: from debugger
>>>Uptime: 6h41m53s
>>>Dumping 239 MB (2 chunks)
>>>  chunk 0: 1MB (156 pages) ... ok
>>>  chunk 1: 239MB (61152 pages) 223 207 191 175 159 143 127 111 95
>>>79 63 47 31 15
>>>
>>>#0  doadump () at pcpu.h:166
>>>166     pcpu.h: No such file or directory.
>>>        in pcpu.h
>>>(kgdb) bt
>>>#0  doadump () at pcpu.h:166
>>>#1  0xc04cc445 in boot (howto=260)
>>>at /usr/src/sys/kern/kern_shutdown.c:409
>>>#2  0xc04cbfa3 in panic (fmt=0xc061ce45 "from debugger")
>>>    at /usr/src/sys/kern/kern_shutdown.c:565
>>>#3  0xc0442e2d in db_panic (addr=-1068598180, have_addr=0,
>>>count=-1, modif=0xcca4b958 "") at
>>>/usr/src/sys/ddb/db_command.c:426 #4  0xc04431ba in
>>>db_command_loop ()
>>>at /usr/src/sys/ddb/db_command.c:395
>>>#5  0xc0444da3 in db_trap (type=3, code=0)
>>>at /usr/src/sys/ddb/db_main.c:221
>>>#6  0xc04e807b in kdb_trap (type=3, code=0, tf=0x0)
>>>    at /usr/src/sys/kern/subr_kdb.c:481
>>>#7  0xc05ff23c in trap (frame=
>>>      {tf_fs = 8, tf_es = 40, tf_ds = 40, tf_edi = -1030784912,
>>>tf_esi = -1067285255, tf_ebp = -861619444, tf_isp = -861619464,
>>>tf_ebx = -861619404, tf_edx = -1067281663, tf_ecx = -1056878592,
>>>tf_eax = -1067272577, tf_trapno = 3, tf_err = 0, tf_eip =
>>>-1068598180, tf_cs = 32, tf_eflags = 642, tf_esp = -861619416,
>>>tf_ss = -1068711934}) at /usr/src/sys/i386/i386/trap.c:622
>>>#8  0xc05f0afa in calltrap ()
>>>at /usr/src/sys/i386/i386/exception.s:138
>>>#9  0xc04e7c5c in kdb_enter (msg=0xc062b67f "KDB: enter: %s\n")
>>>at cpufunc.h:60
>>>#10 0xc04cc002 in panic (fmt=0xc06284f9 "mutex %s not owned at
>>>%s:%d") at /usr/src/sys/kern/kern_shutdown.c:549
>>>#11 0xc04c3b43 in _mtx_assert (m=0xc06286ff, what=-1056878592,
>>>    file=0xc06181c9 "/usr/src/sys/cam/cam_xpt.c", line=4837)
>>>    at /usr/src/sys/kern/kern_mutex.c:768
>>>---Type <return> to continue, or q <return> to quit---
>>>#12 0xc0432c65 in xpt_release_devq (path=0x0, count=1,
>>>run_queue=1) at /usr/src/sys/cam/cam_xpt.c:4837
>>>#13 0xc043420e in xpt_action (start_ccb=0xc22f9530)
>>>    at /usr/src/sys/cam/cam_xpt.c:3580
>>>#14 0xc051091b in kern_sendit (td=0xc28f7870, s=4, mp=0xcca4bc6c,
>>>flags=0,
>>>    control=0x0, segflg=3227694719)
>>>at /usr/src/sys/kern/uipc_syscalls.c:775
>>>#15 0xc0511965 in sendit (td=0xc28f7870, s=4, mp=0xcca4bc6c,
>>>flags=0) at /usr/src/sys/kern/uipc_syscalls.c:715
>>>#16 0xc0511c6e in sendto (td=0xc062b67f, uap=0xc1015000)
>>>    at /usr/src/sys/kern/uipc_syscalls.c:833
>>>#17 0xc05ff737 in syscall (frame=
>>>      {tf_fs = 59, tf_es = 59, tf_ds = 59, tf_edi = 672381756,
>>>tf_esi = 134536657, tf_ebp = -1077945788, tf_isp = -861618844,
>>>tf_ebx = 672417536, tf_edx = 74, tf_ecx = 134541840, tf_eax =
>>>133, tf_trapno = 12, tf_err = 2, tf_eip = 672270187, tf_cs = 51,
>>>tf_eflags = 534, tf_esp = -1077945820, tf_ss = 59})
>>>    at /usr/src/sys/i386/i386/trap.c:1016
>>>#18 0xc05f0b4f in Xint0x80_syscall ()
>>>at /usr/src/sys/i386/i386/exception.s:191
>>>#19 0x00000033 in ?? ()
>>>Previous frame inner to this frame (corrupt stack?)
>>>
>>>Dmesg:
>>>Copyright (c) 1992-2006 The FreeBSD Project.
>>>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
>>>1993, 1994
>>>        The Regents of the University of California. All rights
>>>reserved.
>>>FreeBSD 7.0-CURRENT #0: Wed Apr 19 13:18:18 EDT 2006
>>>
>>>amistry@littleguy.am-productions.biz:/usr/obj/usr/src/sys/LITTLEG
>>>UY Timecounter "i8254" frequency 1193182 Hz quality 0
>>>CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (859.34-MHz
>>>586-class CPU)
>>>  Origin = "GenuineTMx86"  Id = 0x543  Stepping = 3
>>>  Features=0x80893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP,CMOV,MMX>
>>>real memory  = 251527168 (239 MB)
>>>avail memory = 236593152 (225 MB)
>>>Crusoe LongRun support enabled, current mode: 2 <867MHz 1300mV
>>>100%> kbd1 at kbdmux0
>>>acpi0: <FUJ PAULING2> on motherboard
>>>acpi0: Power Button (fixed)
>>>acpi_ec0: <Embedded Controller: GPE 0> port 0x62,0x66 on acpi0
>>>Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
>>>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on
>>>acpi0 cpu0: <ACPI CPU> on acpi0
>>>acpi_throttle0: <ACPI CPU Throttling> on cpu0
>>>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>>pci0: <ACPI PCI bus> on pcib0
>>>pci0: <memory, RAM> at device 0.1 (no driver attached)
>>>pci0: <memory, RAM> at device 0.2 (no driver attached)
>>>ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
>>>0xfc100000-0xfc100fff irq 11 at device 2.0 on pci0
>>>ohci0: [GIANT-LOCKED]
>>>usb0: OHCI version 1.0, legacy support
>>>usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
>>>usb0: USB revision 1.0
>>>usbd_get_string: getting lang failed, using 0
>>>uhub0: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1>
>>>on usb0
>>>uhub0: 2 ports with 2 removable, self powered
>>>pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem
>>>0xfc101000-0xfc101fff irq 9 at device 4.0 on pci0
>>>pcm0: <SigmaTel STAC9756/57 AC97 Codec>
>>>pcm0: [GIANT-LOCKED]
>>>pci0: <bridge> at device 6.0 (no driver attached)
>>>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>>>isa0: <ISA bus> on isab0
>>>cbb0: <TI1410 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
>>>cardbus0: <CardBus bus> on cbb0
>>>pccard0: <16-bit PCCard bus> on cbb0
>>>atapci0: <AcerLabs M5229 UDMA66 controller> port
>>>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 15.0
>>>on pci0
>>>atapci0: using PIO transfers above 137GB as workaround for 48bit
>>>DMA access bug, expect reduced performance
>>>ata0: <ATA channel 0> on atapci0
>>>ata1: <ATA channel 1> on atapci0
>>>rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem
>>>0xfc102000-0xfc1020ff irq 9 at device 16.0 on pci0
>>>miibus0: <MII bus> on rl0
>>>rlphy0: <RealTek internal media interface> on miibus0
>>>rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>>rl0: Ethernet address: 00:e0:00:ae:45:08
>>>fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
>>>0xfc102800-0xfc102fff,0xfc104000-0xfc107fff irq 9 at device 19.0
>>>on pci0
>>>fwohci0: OHCI version 1.10 (ROM=0)
>>>fwohci0: No. of Isochronous channels is 4.
>>>fwohci0: EUI64 00:00:0e:10:00:b0:29:d0
>>>fwohci0: Phy 1394a available S400, 1 ports.
>>>fwohci0: Link S400, max_rec 2048 bytes.
>>>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>>>dcons_crom0: <dcons configuration ROM> on firewire0
>>>dcons_crom0: bus_addr 0xea34000
>>>fwohci0: Initiate bus reset
>>>fwohci0: node_id=0x8800ffc0, gen=1, non CYCLEMASTER mode
>>>firewire0: 2 nodes, maxhop <= 1, cable IRM = 1
>>>vgapci0: <VGA-compatible display> port 0x1800-0x18ff mem
>>>0xfd000000-0xfdffffff,0xfc103000-0xfc103fff irq 9 at device 20.0
>>>on pci0
>>>acpi_video0: <ACPI video extension> on vgapci0
>>>drm0: <Rage Mobility P/M> on vgapci0
>>>info: [drm] Initialized mach64 1.0.0 20020904
>>>acpi_button0: <Power Button> on acpi0
>>>acpi_acad0: <AC Adapter> on acpi0
>>>battery0: <ACPI Control Method Battery> on acpi0
>>>battery1: <ACPI Control Method Battery> on acpi0
>>>acpi_lid0: <Control Method Lid Switch> on acpi0
>>>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
>>>acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>>kbd0 at atkbd0
>>>atkbd0: [GIANT-LOCKED]
>>>psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
>>>psm0: [GIANT-LOCKED]
>>>psm0: model Generic PS/2 mouse, device ID 0
>>>acpi_fujitsu0: <Fujitsu Function Hotkeys FUJ02B1> on acpi0
>>>pmtimer0 on isa0
>>>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff
>>>pnpid ORM0000 on isa0
>>>sc0: <System console> at flags 0x100 on isa0
>>>sc0: VGA <16 virtual consoles, flags=0x300>
>>>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
>>>on isa0
>>>Timecounter "TSC" frequency 859339043 Hz quality 800
>>>Timecounters tick every 10.000 msec
>>>acpi_acad0: acline initialization start
>>>battery0: battery initialization start
>>>battery1: battery initialization start
>>>acpi_acad0: On Line
>>>acpi_acad0: acline initialization done, tried 1 times
>>>battery0: battery initialization done, tried 1 times
>>>ad0: 19077MB <TOSHIBA MK2018GAP M1.42 A> at ata0-master UDMA66
>>>firewire0: bus manager 1
>>>acd0: CDRW <TOSHIBA DVD-ROM SD-R2212/1F15> at ata1-master UDMA33
>>>firewire0: New S400 device ID:0000d1008051e6dd
>>>Trying to mount root from ufs:/dev/ad0s2a
>>>WARNING: / was not properly dismounted
>>>WARNING: /tmp was not properly dismounted
>>>WARNING: /usr was not properly dismounted
>>>WARNING: /var was not properly dismounted
>>>battery1: battery initialization failed, giving up
>>>fuse4bsd: version 0.3.0, FUSE ABI 7.5
> 
> 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?444F0977.3010103>