Date: Wed, 5 Dec 2001 10:52:08 +0300 From: "Oleg Y. Ivanov" <oleg_y_ivanov@mailru.com> To: <questions@freebsd.org> Subject: snort dumps core with signal 11 Message-ID: <011101c17d61$bf85c800$080ba8c0@dwec.ru>
next in thread | raw e-mail | index | archive | help
Hi all ! Recently I've installed Snort (Version 1.8.1-RELEASE (Build 74)) under FreeBSD 4.4-stable - FreeBSD test.dwec.ru 4.4-20011023-STABLE FreeBSD 4.4-20011023-STABLE #0: Fri Nov 30 15:29:29 MSK 2001 root@test.dwec.ru:/usr/src/sys/compile/TEST i386 listening on 10Mbit LAN (tl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ) connected to 10Mbit/s hub as you can see. The Problem : snort dumps core with signal 11 every ~12-14 hours. Dec 5 03:13:47 test /kernel: pid 10833 (snort), uid 0: exited on signal 11 (core dumped) Dec 5 03:13:48 test /kernel: Dec 5 03:13:47 nids /kernel: pid 10833 (snort), uid 0: exited on signal 11 (core dumped) Somebody 've told me that signal 11 is rised mostly when FBSD is running on faulty hardware - is this the case ? the hardware is old Compaq ProSignia 200 : CPU: Pentium II/Pentium II Xeon/Celeron (233.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,M MX> real memory = 67108864 (65536K bytes) avail memory = 62189568 (60732K bytes) Preloaded elf kernel "kernel" at 0xc031e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031e09c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 sym0: <875> port 0x6000-0x60ff mem 0x41000000-0x41000fff,0x41002000-0x410020ff irq 5 at device 10.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking pci0: <ATI Mach64-GU graphics accelerator> at 13.0 tl0: <Compaq NetFlex-3/P Integrated> port 0x6800-0x680f mem 0x41002100-0x4100210f irq 9 at device 16.0 on pci0 tl0: Ethernet address: 00:80:5f:7d:9b:d4 miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0: <ThunderLAN 10baseT media interface> on miibus0 tlphy0: 10base2/BNC, 10base5/AUI isab0: <Intel 82371SB PCI to ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf100-0xf10f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0671 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xe1fff,0xe4000-0xe5fff,0xe8000-0xedfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limi ted to 1000 packets/entry by default Waiting 10 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a ( Ye Old SCSI-2 1,2Gb HDD :) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?011101c17d61$bf85c800$080ba8c0>