From owner-freebsd-current Tue May 20 19:04:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10118 for current-outgoing; Tue, 20 May 1997 19:04:11 -0700 (PDT) Received: from pent.perigee.net (slip129-37-195-82.nc.us.ibm.net [129.37.195.82]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA10111 for ; Tue, 20 May 1997 19:04:05 -0700 (PDT) Received: from slip129-37-195-82.nc.us.ibm.net (localhost.perigee.net [127.0.0.1]) by pent.perigee.net (8.8.5/8.8.5) with ESMTP id WAA04831 for ; Tue, 20 May 1997 22:04:01 -0400 (EDT) Message-Id: <199705210204.WAA04831@pent.perigee.net> To: current@freebsd.org From: "Adam W. Hawks" Reply-to: awhawks@perigee.net Subject: worm0 failure with HP4020i and current Date: Tue, 20 May 1997 22:03:59 -0400 Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I used to be able to burn cd's with great success around 4/15/97 or so but recently they fail with weird errors. I am running current from 05/20/97 and recently tried to burn a cd(using the script from /usr/share/examples/worm). It failed with the following errors. bash# cd /usr/save bash# burncd ports.img Place CD in the worm drive now and press return: dd: /dev/rworm0: Invalid argument 40+0 records in 0+0 records out 0 bytes transferred in 0.179860 secs (0 bytes/sec) team: guy pid 4813: error on upstream receive team: guy pid 4814: guy was aborted team: stop remaining 4 guys May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:2c,0 Command sequence error team: guy pid 4815: guy was aborted May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:2c,0 Command sequence error wormcontrol: ioctl(WORMIOFIXATION): Invalid argument May 20 21:57:50 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC May 20 21:57:50 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC bash# 5120k read Here is a boot -v from my system Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Tue May 20 20:40:27 EDT 1997 root@ns1p44.cht.perigee.net:/usr/src/sys/compile/pent Calibrating clock(s) ... i586 clock: 74533480 Hz, i8254 clock: 1193099 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_I586_CALIBRATION not specified - using old calibration method CPU: Pentium (74.54-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 33554432 (32768K bytes) Physical memory hole(s): avail memory = 29933568 (29232K bytes) DEVFS: ready for devices pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 [class=60000] [hdr=0] is there (id=12508086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 1 on pci0:0:0 chip1 rev 0 on pci0:7:0 chip2 rev 0 on pci0:7:1 mapreg[20] type=1 addr=0000e800 size=0010. I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: disabled Mouse IRQ12: disabled Interrupt Routing: A: , B: , C: , D: MB0: , MB1: pci0:7:2: Intel Corporation, device=0x7020, class=serial, subclass=0x03 int d irq 15 [no driver assigned] map(20): io(e400) fxp0 rev 1 int a irq 9 on pci0:10:0 mapreg[10] type=0 addr=fb800000 size=1000. mapreg[14] type=1 addr=0000e000 size=0020. mapreg[18] type=0 addr=fa800000 size=100000. reg16: virtual=0xf43fd000 physical=0xfb800000 size=0x1000 fxp0: Ethernet address 00:a0:c9:04:e8:35 bpf: fxp0 attached ahc0 rev 0 int a irq 10 on pci0:11:0 mapreg[10] type=1 addr=0000d800 size=0100. mapreg[14] type=0 addr=fa000000 size=1000. reg16: ioaddr=0xd800 size=0x100 ahc0: Reading SEEPROM...done. low byte termination enabled, high byte termination enabled ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 369 instructions downloaded Done ahc0: Probing channel A scbus0 at ahc0 bus 0 ahc0: target 0 synchronous at 10.0MHz, offset = 0xf scbus0 target 0 lun 0: type 0 fixed SCSI 2 sd0 at scbus0 target 0 lun 0 sd0: Direct-Access 1033MB (2117025 512 byte sectors) sd0: with 1819 cyls, 15 heads, and an average 77 sectors/track ahc0: target 1 synchronous at 10.0MHz, offset = 0xf scbus0 target 1 lun 0: type 0 fixed SCSI 2 sd1 at scbus0 target 1 lun 0 sd1: Direct-Access 2956MB (6054834 512 byte sectors) sd1: with 3138 cyls, 19 heads, and an average 101 sectors/track ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers scbus0 target 3 lun 0: type 1 removable SCSI 1 st0 at scbus0 target 3 lun 0 st0: Sequential-Access density code 0x0, st0: Target Busy st0: Target Busy st0: Target Busy drive empty ahc0:A:4: refuses synchronous negotiation. Using asynchronous transfers scbus0 target 4 lun 0: type 5 removable SCSI 2 worm0 at scbus0 target 4 lun 0 worm0: Write-Once ahc0: target 6 synchronous at 8.0MHz, offset = 0xf scbus0 target 6 lun 0: type 5 removable SCSI 2 cd0 at scbus0 target 6 lun 0 cd0: CD-ROM cd present [249912 x 2048 byte records] vga0 rev 0 int a irq 11 on pci0:12:0 mapreg[10] type=0 addr=f8000000 size=2000000. pci0: uses 34611200d bytes of memory from f8000000 upto fb800fff. pci0: uses 304d bytes of I/O space from d800 upto e80f. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 ff ff 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA color <16 virtual consoles, flags=0x0> lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A esp_port has com 3 esp_port has com 3 esp_port has com 3 sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa sio1: type 16550A esp_port has com 3 esp_port has com 3 esp_port has com 3 pca0 on motherboard pca0: PC speaker audio driver wdc0 not found at 0x1f0 wdc1 not found at 0x170 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 msize 206696 on motherboard npx0: INT 16 interface gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa gus0: gus0: joy0 at 0x201 on isa joy0: joystick imasks: bio c0000440, tty f000009a, net e0000200 sio0: 64 events for device with no tp sio1: 64 events for device with no tp BIOS Geometries: 0:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0177fe3f 0..375=376 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. configure() finished. DEVFS: ready to run new masks: bio c0000440, tty f000009a, net f000029a bpf: tun0 attached bpf: ppp0 attached bpf: ppp1 attached bpf: lo0 attached bpf: ds0 attached ccd0-3: Concatenated disk drivers sd0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK Start pid=2 Start pid=3 Start pid=4 sd1s1: type 0xa5, start 0, end = 6054833, size 6054834 : OK ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. ipx_ctlinput: cmd 2. Any help would be greatly appreciated. awhawks@perigee.net