Date: Sun, 6 Jul 2014 18:22:53 +0200 From: Milan Obuch <freebsd-ppc@dino.sk> To: freebsd-ppc@freebsd.org Subject: Re: MPC8548 question Message-ID: <20140706182253.0af2647b@zeta.dino.sk> In-Reply-To: <53B97677.4000008@freebsd.org> References: <20140706095035.742b9f1a@zeta.dino.sk> <53B97677.4000008@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages. --=_mailhost.netlab.sk-67808-1404663777-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline On Sun, 06 Jul 2014 09:16:55 -0700 Nathan Whitehorn <nwhitehorn@freebsd.org> wrote: > RB800 works great (MPC8544), although support for the CF slot is > still missing (I need to add that). I didn't see an attachment, but > looking at the kernel messages would be great. I think the most > likely thing is some kind of interrupt routing failure, which should > be pretty easy to fix. -Nathan > Hmm, list ate attachment, retry... I think that way too (interrupt lost or something like this), but no idea how could I find what to fix. Milan --=_mailhost.netlab.sk-67808-1404663777-0001-2 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=rb1000-netboot.log RouterBOOT booter 2.20 RouterBoard 1000 CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. trying dhcp protocol... OK resolved mac address 10:BF:48:7B:14:12 Gateway: 192.168.16.1 transfer started .................................................. transfer ok, time=2.95s setting up elf image... OK jumping to kernel code RouterBOOT booter 2.20 RouterBoard 1000 CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. trying dhcp protocol... OK resolved mac address 10:BF:48:7B:14:12 Gateway: 192.168.16.1 transfer started .................................................. transfer ok, time=2.63s setting up elf image... OK jumping to kernel code GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 r268286M: Sun Jul 6 08:33:34 CEST 2014 root@zeta.dino.sk:/data/powerpc/obj/powerpc.powerpc/data/src/11/sys/MPC8548 powerpc gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. cpu0: Freescale e500v2 core revision 2.0, 1333.32 MHz cpu0: Features 84000000<PPC32,MMU> cpu0: HID0 80804000<EMCP,DOZE,TBEN> real memory = 469745664 (447 MB) avail memory = 458801152 (437 MB) random device not loaded; using insecure entropy random: <Software, Yarrow> initialized ofwbus0: <Open Firmware Device Tree> on nexus0 simplebus0: <Flattened device tree simple bus> mem 0xe0000000-0xe00fffff on ofwbus0 uart0: <16550 or compatible> mem 0x4500-0x45ff irq 26 on simplebus0 uart0: console (115339,n,8,1) openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on simplebus0 tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0x24000-0x24fff irq 13,14,18 on simplebus0 miibus0: <MII bus> on tsec0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto tsec0: Ethernet address: 00:0c:42:43:62:0c tsec1: <Enhanced Three-Speed Ethernet Controller> mem 0x25000-0x25fff irq 19,20,24 on simplebus0 miibus1: <MII bus> on tsec1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto tsec1: Ethernet address: 00:0c:42:43:62:0d tsec2: <Enhanced Three-Speed Ethernet Controller> mem 0x26000-0x26fff irq 15,16,17 on simplebus0 miibus2: <MII bus> on tsec2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 2 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto tsec2: Ethernet address: 00:0c:42:43:62:0e tsec3: <Enhanced Three-Speed Ethernet Controller> mem 0x27000-0x27fff irq 21,22,23 on simplebus0 miibus3: <MII bus> on tsec3 rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus3 rgephy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto tsec3: Ethernet address: 00:0c:42:43:62:0f cryptosoft0: <software crypto> on nexus0 Timecounter "timebase" frequency 66666000 Hz quality 0 Event timer "decrementer" frequency 66666000 Hz quality 1000 Timecounters tick every 1.000 msec bootpc_init: wired to interface 'tsec0' Sending DHCP Discover packet from interface tsec0 (00:0c:42:43:62:0c) tsec0: link state changed to DOWN tsec0: link state changed to UP tsec0: watchdog timeout tsec0: link state changed to DOWN DHCP/BOOTP timeout for server 255.255.255.255 tsec0: link state changed to UP DHCP/BOOTP timeout for server 255.255.255.255 random: unblocking device. tsec0: watchdog timeout tsec0: link state changed to DOWN DHCP/BOOTP timeout for server 255.255.255.255 tsec0: link state changed to UP DHCP/BOOTP timeout for server 255.255.255.255 tsec0: watchdog timeout tsec0: link state changed to DOWN DHCP/BOOTP timeout for server 255.255.255.255 --=_mailhost.netlab.sk-67808-1404663777-0001-2--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140706182253.0af2647b>