From owner-freebsd-current Sun Dec 29 17:54:07 1996 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.4/8.8.4) id RAA24710 for current-outgoing; Sun, 29 Dec 1996 17:54:07 -0800 (PST) Received: from mule1.mindspring.com (mule1.mindspring.com [204.180.128.167]) by freefall.freebsd.org (8.8.4/8.8.4) with ESMTP id RAA24705 for ; Sun, 29 Dec 1996 17:54:05 -0800 (PST) Received: from rlb.users.mindspring.com (user-168-121-25-139.dialup.mindspring.com [168.121.25.139]) by mule1.mindspring.com (8.8.2/8.8.4) with SMTP id UAA07476 for ; Sun, 29 Dec 1996 20:54:01 -0500 Message-ID: <32C720BA.41C67EA6@mindspring.com> Date: Sun, 29 Dec 1996 20:54:02 -0500 From: Ron Bolin X-Mailer: Mozilla 3.01Gold (X11; I; FreeBSD 3.0-CURRENT i386) MIME-Version: 1.0 To: freebsd-current@freebsd.org Subject: Can't dump to DAT without errors with todays current. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk My last good dump using dump0uBf /dev/nrst1 200000 /usr on a 90 mm DDS tape worked fine on 12-20-96 current. I updated today and I can no longer dump my user file system. I can dump root OK since it is small, but not /usr which is 1GB. I tried several tapes, and the drive works fine uner WinNT 4.0. for backing up over 1GB. My system is a Adaptec 2940UW and a HP 35480 4mm DAT as st1. My systems has 128MB RAM, and a 4GB Fujitsu Fast Wide SCSI drive. I have an Archive 5525S QIC SCSI tape as st0. Any ideas what has changed? I saw only minor changes to dump in CVS. I get these errors when dump fails and says to sees the end on tape: /sbin/dump 0uBbf 200000000 32 /dev/nrst1 /usr DUMP: Date of this level 0 dump: Sun Dec 29 20:39:27 1996 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rsd1s1e (/usr) to /dev/nrst1 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 1112096 tape blocks on 0.01 tape(s). DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: End of tape detected DUMP: Closing /dev/nrst1 DUMP: Change Volumes: Mount volume #2 DUMP: Is the new volume mounted and ready to go?: ("yes" or "no") Also my console output is: $ sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0x44 SEQADDR == 0x137 sd1(ahc0:1:0): abort message in message buffer sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x138 ahc0: Issued Channel A Bus Reset. 3 SCBs aborted sd1(ahc0:1:0): UNIT ATTENTION asc:2f,0 Commands cleared by another initiator , retries:3 st1(ahc0:5:0): UNIT ATTENTION asc:29,0 st1(ahc0:5:0): Power on, reset, or bus device reset occurred st1: oops not queued sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xf sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xb ahc0: Issued Channel A Bus Reset. 2 SCBs aborted sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xb sd1(ahc0:1:0): timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0xc ahc0: Issued Channel A Bus Reset. 1 SCBs aborted Thank's Ron -- **************************************************************************** Ron Bolin rlb@mindspring.com, http://www.mindspring.com/~rlb/ GSU: gs01rlb@panther.gsu.edu matrlbx@indigo4.cs.gsu.edu Home: 770-992-8877 ****************************************************************************