Date: Wed, 13 Sep 2017 17:03:56 +0200 From: Sebastian Zietz <mail@sezi.eu> To: freebsd-arm@freebsd.org Subject: NanoPi Neo missing awg0 Message-ID: <065FD014-DA60-43D6-87E2-3B53BCDC0650@sezi.eu>
next in thread | raw e-mail | index | archive | help
Hi everyone,
currently I am playing with my NanoPi NEO and build an image for it =
using crochet. The image was able to boot but the network interface =
could't be attached:
# dmesg | grep awg
awg0: <Allwinner Gigabit Ethernet> mem =
0x1c30000-0x1c30103,0x1c00030-0x1c00033 irq 35 on simplebus0
awg0: soft reset timed out
device_attach: awg0 attach returned 60
Since awg0 is running fine with the FreeBSD image linked in the =
FriendlyARM wiki [1], I tried to swap its U-Boot (2016.07) against mine =
from the ports (2017.07). With the following patch and the older U-Boot =
I managed to get awg working:
Index: sys/boot/fdt/dts/arm/h3.dtsi
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- sys/boot/fdt/dts/arm/h3.dtsi (revision 322966)
+++ sys/boot/fdt/dts/arm/h3.dtsi (working copy)
@@ -36,6 +36,7 @@
=20
soc {
emac: ethernet@1c30000 {
+ #reset-cells =3D <1>;
compatible =3D "allwinner,sun8i-h3-emac";
reg =3D <0x01c30000 0x104>, <0x01c00030 0x4>;
reg-names =3D "emac", "syscon";
# dmesg | grep awg
awg0: <Allwinner Gigabit Ethernet> mem =
0x1c30000-0x1c30103,0x1c00030-0x1c00033 irq 38 on simplebus0
miibus0: <MII bus> on awg0
Sadly my USB network card is not working with older U-Boot:
U-Boot 2017.07
# usbconfig=20
ugen0.1: <Allwinner EHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH=
(480Mbps) pwr=3DSAVE (0mA)
ugen1.1: <Generic OHCI root HUB> at usbus1, cfg=3D0 md=3DHOST spd=3DFULL =
(12Mbps) pwr=3DSAVE (0mA)
ugen1.2: <vendor 0x0fe6 USB 2.0 10100M Ethernet Adaptor> at usbus1, =
cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON (120mA)
U-Boot 2016.07
# usbconfig=20
ugen0.1: <Allwinner EHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH=
(480Mbps) pwr=3DON (0mA)
ugen1.1: <Generic OHCI root HUB> at usbus1, cfg=3D0 md=3DHOST spd=3DFULL =
(12Mbps) pwr=3DON (0mA)
For building I used GENERIC kernel and revision 322966.
Does anyone know how to fix the "soft reset timed out" error? I am =
thankful for every Idea, I will try it out.
[1] http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO#FreeBSD=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?065FD014-DA60-43D6-87E2-3B53BCDC0650>