Date: Fri, 20 Oct 2006 16:26:20 +1300 From: "Juha Saarinen" <juhasaarinen@gmail.com> To: "leo fante" <leofante@gawab.com> Cc: "freebsd-questions@FreeBSD.org" <freebsd-questions@freebsd.org> Subject: Re: Digitemp on freebsd 6.1 Message-ID: <b34be8420610192026u43f6cff0x74826623919982c4@mail.gmail.com> In-Reply-To: <4537998D.40202@gawab.com> References: <4537998D.40202@gawab.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/20/06, leo fante <leofante@gawab.com> wrote: > Hi > I'm trying to use digitemp (http://www.digitemp.com) on freebsd6.1 but my attempt so far is without > success. > > Here what I've done, on a minimal freebsd installation: > downloaded the 3.4.0 tgz, installed gmake, then compiled with "gmake ds9097" ( > worked without errors) > > ./digitemp_9097 -i -s /dev/ttyd0 -q -c ./config > to initialize the program > > Digitemp starts and then nothing happens. > > I'm using a passive circuit and I've verified that it works. Installed linux on the > same machine and it works. > I've checked that the serial interface on the freebsd machine works correctly > connecting a serial modem and issuing ati command from minicom. Used root to avoid > problems connected with permissions, chmodded to 777 all /dev/ttyd*, tried ttyd1 the > result is always the same, the program starts without errors and just stays there doing (apparently) > nothing, to exit I've to interrupt the execution. > > Since there are no errors I've no other idea of what is wrong. > Any help would be greatly appreciated, thanks If I understand it right, digitemp is a Linux program - don't you need to run it under Linux emulation? -- Juha
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b34be8420610192026u43f6cff0x74826623919982c4>