Date: Wed, 26 May 1999 23:24:17 -0600 From: Wes Peters <wes@softweyr.com> To: Darren Reed <avalon@coombs.anu.edu.au> Cc: hackers@FreeBSD.ORG Subject: Re: more on the pcmcia saga. Message-ID: <374CD701.56711641@softweyr.com> References: <199905261842.EAA02819@cheops.anu.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Darren Reed wrote:
>
> It appears that having "pccardd" enabled in /etc/defaults/rc.conf
> causes it to be started very early with the end result of the
> "pcic controller" also allocating irq9 (in a separate pair of
> messages). i.e. this appears early on:
>
> PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows)
> pcic: controller irq 5
>
> just before "Initializing PC-card drivers: fdc" - fdc ?! - and then
> later, whilst fsck'ing or whatever, I saw this:
>
> PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows)
> pcic: controller irq 9
>
> What's going on here ?
Here's mine, just in case it's of any help:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #6: Fri May 21 01:09:29 MDT 1999
rootb@homer:/usr/src/sys/compile/HOMER
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (298.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping=10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62701568 (61232K bytes)
Preloaded elf kernel "kernel" at 0xf0273000.
Preloaded splash_image_data "/boot/saturn1.bmp" at 0xf027309c.
Preloaded elf module "splash_bmp.ko" at 0xf02730ec.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x03 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <NeoMagic model 0005 VGA-compatible display device> rev 0x20 int a irq 9 on pci0.8.0
chip3: <PCI to CardBus bridge (vendor=1180 device=0478)> rev 0x80 int a irq 255 on pci0.10.0
chip4: <PCI to CardBus bridge (vendor=1180 device=0478)> rev 0x80 int b irq 255 on pci0.10.1
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU MHF2043AT>
wd0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-224E/1.5A>, removable, accel, ovlap, dma, iordis
acd0: drive speed 4134KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 flags 0x31 on isa
apm: found APM BIOS version 1.2
PC-Card Intel 82365 (5 mem & 2 I/O windows)
pcic: controller irq 3
^^^^^^^^^^^^^^^^^^^^^^
Initializing PC-card drivers: sio
changing root device to wd0s2a
Card inserted, slot 1
PC-Card Intel 82365 (5 mem & 2 I/O windows)
pcic: controller irq 5
^^^^^^^^^^^^^^^^^^^^^^
Card inserted, slot 3
ed0: address 00:80:c8:8c:01:58, type NE2000 (16 bit)
--
"Where am I, and what am I doing in this handbasket?"
Wes Peters Softweyr LLC
http://www.softweyr.com/~softweyr wes@softweyr.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?374CD701.56711641>