Date: Sun, 04 Mar 2007 09:30:35 -0800 From: Garrett Cooper <youshi10@u.washington.edu> To: freebsd-questions@freebsd.org Subject: Re: Sony DRU-820A DVD-RW RAM Drive Message-ID: <45EB023B.2030104@u.washington.edu> In-Reply-To: <200703041013.38470.bulk_mail@siegel-tech.net> References: <200703041013.38470.bulk_mail@siegel-tech.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Aaron Siegel wrote: > Hello > > Cannot > read or play audio cdrom disks. > run the Windows install for Win4BSD the install worked worked with a standard > cdrom drive > > Can > burn CD-R (with cdrecord dev=1,0,0) > burn DVD-RW (with mkisofs) > play Movie dvds. > read dvd disks > read data cdrom disks > > I am using 6.1 Release. > > /boot/loader.conf > atapicam_load="YES" > hw.ata.ata_dma="1" > hw.ata.atapi_dma="1" > > I have set the mode for the device to UDMA33 from UDMA66. > How can I set this up so the drive boots as UDMA33? Do I add the following > line into the device.hints: > hint.cd.0.mode="UDMA33"? > > acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66 > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device > cd0: 66.000MB/s transfers > > > I am receiving a following errors while booting > cd0: cd present [309837 x 2048 byte records] > (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 > (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > (cd0:ata1:0:0:0): SCSI Status: Check Condition > (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0 > (cd0:ata1:0:0:0): Illegal mode for this track > (cd0:ata1:0:0:0): Unretryable error > (cd0:ata1:0:0:0): cddone: got error 0x6 back > > The errors when playing a DVD > (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0 c c4 0 > (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > (cd0:ata1:0:0:0): SCSI Status: Check Condition > (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > (cd0:ata1:0:0:0): Unretryable error > (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0 c c4 0 > (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > (cd0:ata1:0:0:0): SCSI Status: Check Condition > (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > (cd0:ata1:0:0:0): Unretryable error > (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0 c c4 0 > (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > (cd0:ata1:0:0:0): SCSI Status: Check Condition > (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > (cd0:ata1:0:0:0): Unretryable error > (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0 c c4 0 > (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > (cd0:ata1:0:0:0): SCSI Status: Check Condition > (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > (cd0:ata1:0:0:0): Unretryable error > > Thank you > Aaron The question is, how are you trying to read the audio information on the disk(s). -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45EB023B.2030104>