From owner-freebsd-stable Sat Aug 4 18:57:27 2001 Delivered-To: freebsd-stable@freebsd.org Received: from earth.backplane.com (earth-nat-cw.backplane.com [208.161.114.67]) by hub.freebsd.org (Postfix) with ESMTP id F10DB37B401 for ; Sat, 4 Aug 2001 18:57:03 -0700 (PDT) (envelope-from dillon@earth.backplane.com) Received: (from dillon@localhost) by earth.backplane.com (8.11.4/8.11.2) id f751uxj77597; Sat, 4 Aug 2001 18:56:59 -0700 (PDT) (envelope-from dillon) Date: Sat, 4 Aug 2001 18:56:59 -0700 (PDT) From: Matt Dillon Message-Id: <200108050156.f751uxj77597@earth.backplane.com> To: "Justin T. Gibbs" Cc: Helge Oldach , freebsd-stable@FreeBSD.ORG Subject: Re: Dell Poweredge 2450 vs. recent sys/dev/aic7xxx MFCs References: <200108041524.f74FOpI05007@aslan.scsiguy.com> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just built the world and a new kernel on one of my DELL2550's and the same problem happens. This is a stock 2550, there's no chance of the SCSI backplane being broken and it worked fine with an older kernel. I've included two boot verbose dumps. The first is with the latest kernel. The second is with the previous (working) kernel. -Matt ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ LATEST KERNEL SMAP type=01 base=00000000 00000000 len=00000000 000a0000 SMAP type=01 base=00000000 00100000 len=00000000 1fef0000 SMAP type=02 base=00000000 1fffec00 len=00000000 00000400 SMAP type=03 base=00000000 1fff0000 len=00000000 0000ec00 SMAP type=02 base=00000000 fec00000 len=00000000 00010000 SMAP type=02 base=00000000 fee00000 len=00000000 00010000 SMAP type=02 base=00000000 fff80000 len=00000000 00080000 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-PRERELEASE #1: Sat Aug 4 18:30:26 PDT 2001 dillon@apollo.backplane.com:/FreeBSD/FreeBSD-4.x/src/sys/compile/DELL2550 Calibrating clock(s) ... TSC clock: 1130458843 Hz, i8254 clock: 1193193 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0035a000 - 0x1ffe7fff, 533258240 bytes (130190 pages) avail memory = 519090176 (506924K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Changing APIC ID for IO APIC #1 from 0 to 3 on chip Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xc73e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 Other BIOS signatures found: ACPI: 000fdc80 Preloaded elf kernel "kernel" at 0xc0331000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000270 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcib-: pcib0 exists, using next available unit number pcib-: pcib1 exists, using next available unit number npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcib0: on motherboard found-> vendor=0x1166, dev=0x0008, revid=0x23 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0008, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0006, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0006, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1002, dev=0x4752, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base 0000ec00, size 8 map[18]: type 1, range 32, base fe101000, size 12 found-> vendor=0x1166, dev=0x0200, revid=0x50 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0211, revid=0x00 class=01-01-8a, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 000008b0, size 4 pci0: on pcib0 pci0: (vendor=0x1002, dev=0x4752) at 14.0 isab0: at device 15.0 on pci0 isa0: on isab0 pci0: (vendor=0x1166, dev=0x0211) at 15.1 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcib2: on motherboard found-> vendor=0x8086, dev=0x0962, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=3 secondarybus=3 IOAPIC #1 intpin 0 -> irq 2 Freeing (NOT implemented) redirected PCI irq 5. found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=2 map[10]: type 1, range 32, base fe900000, size 12 map[14]: type 1, range 32, base 0000bcc0, size 6 map[18]: type 1, range 32, base fe500000, size 20 pci2: on pcib2 pcib4: at device 2.0 on pci2 IOAPIC #1 intpin 15 -> irq 5 Freeing (NOT implemented) redirected PCI irq 10. found-> vendor=0x9005, dev=0x00cf, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000cc00, size 8 map[14]: type 1, range 64, base fe7ff000, size 12 IOAPIC #1 intpin 14 -> irq 10 Freeing (NOT implemented) redirected PCI irq 5. found-> vendor=0x9005, dev=0x00cf, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base 0000c800, size 8 map[14]: type 1, range 64, base fe7fe000, size 12 pci3: on pcib4 ahc0: port 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 5 at device 4.0 on pci3 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 419 instructions downloaded aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 10 at device 4.1 on pci3 ahc1: Reading SEEPROM...done. ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 419 instructions downloaded aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 2 at device 4.0 on pci2 fxp0: using memory space register mapping fxp0: Ethernet address 00:06:5b:19:be:6f fxp0: PCI IDs: 8086 1229 1028 009b 0008 fxp0: Chip Type: 0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pcib1: on motherboard IOAPIC #1 intpin 1 -> irq 13 Freeing (NOT implemented) redirected PCI irq 10. found-> vendor=0x14e4, dev=0x1644, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=13 map[10]: type 1, range 64, base feb00000, size 16 pci1: on pcib1 pci1: (vendor=0x14e4, dev=0x1644) at 8.0 irq 13 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) pci-: pci3 exists, using next available unit number pcib3: on motherboard pci4: on pcib3 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: