Date: Mon, 13 May 1996 11:29:22 +0200 From: Gerhard Conway <GCONWAY@csir.co.za> To: questions@freebsd.org, dwhite@riley-net170-164.uoregon.edu Subject: Conficts Message-ID: <s1971d1b.070@csir.co.za>
next in thread | raw e-mail | index | archive | help
Hi FreeBSDers.
Attatched please find files relating to our configuration and
bootup feedback. We will also try to do a list of all the
hardware configurations as far as possible to resolve any
possible conflicts. If you want this info, we can send it with.
Please also refer to Marne Karsten (mkarsten) mail also
describing the same problem
Thanx a million
Gerhardt
------------------- TIN_SBO follows --------------------
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $
#
machine "i386"
#cpu "I386_CPU"
cpu "I486_CPU"
#cpu "I586_CPU"
ident TIN_SBO
maxusers 50
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
#controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#device wcd0 #IDE CD-ROM
controller ncr0
controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller ahc1 at isa? bio irq ? vector ahcintr
#controller ahb0 at isa? bio irq ? vector ahbintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
#options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device lpt2 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device ed0 at isa? port 0x280 net irq 15 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x2a0 net irq 11 iomem 0xcc000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
#add for sound blaster card
#controller snd0
#device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr
#device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
#options "SBC_IRQ=5"
#device sbxvi0 at isa? drq 5
#device sbmidi0 at isa? port 0x330
------------------- DMSG.TXT follows --------------------
FreeBSD 2.1.0-RELEASE #0: Mon May 13 10:06:52 1996
mkarsten@tin.mikom.csir.co.za:/usr/src/sys/compile/TIN_SBO
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping=0
Features=0x3<FPU,VME>
real memory = 33554432 (32768K bytes)
avail memory = 30765056 (30044K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 15 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:f9:06:5a, type WD8013EPC (16 bit)
ed1 at 0x2a0-0x2bf irq 11 maddr 0xcc000 msize 16384 on isa
ed1: address 00:00:c0:3a:69:a4, type WD8013EPC (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the PCI bus:
vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:13
ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 12 on pci0:15
ahc0: 2940 Single Channel, SCSI Id=7, aic7870, 255 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:1:0): "CONNER CFP1080S 4649" type 0 fixed SCSI 2
sd0(ahc0:1:0): Direct-Access 1030MB (2110812 512 byte sectors)
(ahc0:2:0): "CONNER CFP2105S 2.14GB 2D4D" type 0 fixed SCSI 2
sd1(ahc0:2:0): Direct-Access 2048MB (4194304 512 byte sectors)
(ahc0:3:0): "IBM DORS-32160 S82C" type 0 fixed SCSI 2
sd2(ahc0:3:0): Direct-Access 2063MB (4226725 512 byte sectors)
pci0:16: UMC, device=0x8881, class=bridge (host) [no driver assigned]
pci0:18: UMC, device=0x886a, class=bridge (isa) [no driver assigned]
changing root device to sd0a
sio0: 30937 more interrupt-level buffer overflows (total 30937)
sio0: 3166 more tty-level buffer overflows (total 3166)
sio0: 23074 more interrupt-level buffer overflows (total 54011)
sio0: 221833 more interrupt-level buffer overflows (total 275844)
sio0: 610300 more interrupt-level buffer overflows (total 886144)
sio0: 576 more tty-level buffer overflows (total 3742)
sio0: 646968 more interrupt-level buffer overflows (total 1533112)
sio0: 388 more tty-level buffer overflows (total 4130)
sio0: 117471 more interrupt-level buffer overflows (total 1650583)
sio0: 180333 more interrupt-level buffer overflows (total 1830916)
sio0: 114788 more interrupt-level buffer overflows (total 1945704)
sio0: 215359 more interrupt-level buffer overflows (total 2161063)
sio0: 334088 more interrupt-level buffer overflows (total 2495151)
sio0: 512725 more interrupt-level buffer overflows (total 3007876)
sio0: 46668 more interrupt-level buffer overflows (total 3054544)
sio0: 1264 more tty-level buffer overflows (total 5394)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?s1971d1b.070>